X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=Makefile;h=ec0c901bfe412c7441b192418ba534e4b70bbe06;hp=376351619646da6cdf955160d927cc67236f80b9;hb=2eb04ca0f8d0ec72b417cddc60672c696b4a3daa;hpb=474955abf3fe4d26171b3ba5ecdbc1784c80cf3a diff --git a/Makefile b/Makefile index 3763516..ec0c901 100644 --- a/Makefile +++ b/Makefile @@ -1,45 +1,196 @@ ############################################################################ # -# fptools/Makefile +# This is the top-level Makefile for GHC # -# This is the main Makefile for fptools. +# Targets: +# +# bootstrap (DEFAULT) +# Builds GHC, then builds the libraries, +# then uses this GHC ("stage 1") to build itself +# ("stage 2"). +# +# bootstrap2 +# Same as bootstrap +# +# bootstrap3 +# bootstrap2 + we build GHC one more time ("stage 3") +# +# stage1 +# Just build up to stage 1 +# +# stage2 +# Just build stage 2 (stage 1 must be built) +# +# stage3 +# Just build stage 3 (stage 2 must be built) +# +# all +# Same as bootstrap +# +# install +# Install everything, including stage 2 compiler by default +# (override with stage=3, for example). +# +# dist +# Make a source dist (WARNING: runs 'make distclean' first) +# +# binary-dist +# Builds a binary distribution +# +# hc-file-bundle +# Builds an HC-file bundle, for bootstrapping +# +# clean, distclean, maintainer-clean +# Increasing levels of cleanliness # ############################################################################ TOP=. include $(TOP)/mk/boilerplate.mk -# find the projects that actually exist... -ProjectsThatExist = $(filter $(patsubst %/, %, $(wildcard */)), $(AllProjects)) +# +# Order is important! It's e.g. necessary to descend into include/ +# before the rest to have a config.h, etc. +# +# If we're booting from .hc files, swap the order +# we descend into subdirs - to boot utils must be before driver. +# +.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3 -# and filter only those that the user requested, if necessary -ifeq "$(ProjectsToBuild)" "" -SUBDIRS = $(ProjectsThatExist) +# We can't 'make boot' in libraries until stage1 is built +ifeq "$(BootingFromHc)" "YES" +SUBDIRS_BUILD = includes rts compat compiler docs utils driver else -SUBDIRS = $(filter $(ProjectsToBuild), $(ProjectsThatExist)) +SUBDIRS_BUILD = includes compat utils driver docs compiler rts endif -ifneq "$(Project)" "" - include $(shell echo $(Project) | tr A-Z a-z)/mk/config.mk -endif +SUBDIRS_INSTALL = includes compat utils driver docs rts libraries compiler -# ----------------------------------------------------------------------------- -# Certain targets require that Project is set from the command line. - -CURRENT_TARGET = $(MAKECMDGOALS) -project-check : - @if [ "$(Project)" = "" ]; then \ - echo " You need to set \"Project\" in order to make $(CURRENT_TARGET)"; \ - echo " eg. make $(CURRENT_TARGET) Project=Ghc"; \ - exit 1; \ +# Sanity check that all the core libraries are in the tree, to catch +# failure to run darcs-all. +check-packages : + @for d in `cat libraries/core-packages`; do \ + if test ! -d libraries/$$d; then \ + echo "Looks like you're missing libraries/$$d,"; \ + echo "maybe you haven't done './darcs-all get'?"; \ + exit 1; \ + fi \ + done + @if test ! -e libraries/base/configure; then \ + echo "Looks like you're missing base's configure script."; \ + echo "Did you run 'sh boot' at the top level?"; \ + exit 1; \ fi +stage1 : check-packages + $(MAKE) -C utils/mkdependC boot + @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ + for i in $(SUBDIRS_BUILD); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) boot $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ + done; \ + for i in $(SUBDIRS_BUILD); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) all $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ + done + $(MAKE) -C libraries boot + $(MAKE) -C libraries all + +stage2 : check-packages + $(MAKE) -C compiler boot stage=2 + $(MAKE) -C compiler stage=2 + +stage3 : check-packages + $(MAKE) -C compiler boot stage=3 + $(MAKE) -C compiler stage=3 + +bootstrap : bootstrap2 + +bootstrap2 : stage1 + $(MAKE) stage2 + +bootstrap3 : bootstrap2 + $(MAKE) stage3 + +all :: bootstrap + +# ----------------------------------------------------------------------------- +# Installing + +# We want to install the stage 2 bootstrapped compiler by default, but we let +# the user override this by saying 'make install stage=1', for example. +ifeq "$(stage)" "" +INSTALL_STAGE = stage=2 +else +INSTALL_STAGE = +endif + +# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too +install :: check-packages + $(INSTALL_DIR) $(bindir) + @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ + for i in $(SUBDIRS_INSTALL); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) $@ $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ + done + +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +# These files need to be in the InstallShield +# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go +# in the top-level directory of the distribution +INSTALL_DATAS += ANNOUNCE LICENSE README +endif + +# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs +# and the perl interpreter and dll into the GHC prefix directory. +# Gcc and Perl source locations derived from configuration data. +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +ifneq "$(WhatGccIsCalled)" "" +install :: + -mkdir $(prefix)/gcc-lib + -mkdir $(prefix)/include + -mkdir $(prefix)/include/mingw + -cp -rp $(GccDir)../include/* $(prefix)/include/mingw + -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib + -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib + -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib + -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib + -cp $(GccDir)gcc.exe $(prefix) + -cp $(GccDir)as.exe $(prefix)/gcc-lib + -cp $(GccDir)ld.exe $(prefix)/gcc-lib + -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib + -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib + -cp $(GhcDir)../perl.exe $(prefix) + -cp $(GhcDir)../perl56.dll $(prefix) +endif +endif + +install-docs :: + @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ + for i in $(SUBDIRS_INSTALL); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) $@ $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ + done + # ----------------------------------------------------------------------------- # Making a binary distribution # -# To make a particular binary distribution: -# set $(Project) to the name of the project, capitalised (eg. Ghc or Happy). - # `dist' `binary-dist' # Create a distribution tar file for this program. The tar file # should be set up so that the file names in the tar file start with @@ -57,175 +208,203 @@ project-check : # that are in the distribution, to make sure they are up to date in # the distribution. See Making Releases. # -# binary-dist is an FPtools addition for binary distributions +# binary-dist is a GHC addition for binary distributions # -binary-dist :: project-check +BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2 -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) +binary-dist:: + -rm -rf $(BIN_DIST_DIR) + -$(RM) $(BIN_DIST_DIR).tar.gz -# -# list of toplevel directories to include in binary distrib. -# -BIN_DIST_MAIN_DIR=$($(Project)MainDir) -BIN_DIST_DIRS=$($(Project)BinDistDirs) +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -binary-dist:: binary-dist-pre +binary-dist:: + $(MAKE) prefix=$(BIN_DIST_DIR) install -BIN_DIST_TOP= distrib/Makefile-bin.in \ - distrib/configure-bin.in \ - distrib/INSTALL \ - $(BIN_DIST_MAIN_DIR)/ANNOUNCE \ - $(BIN_DIST_MAIN_DIR)/VERSION \ - $(BIN_DIST_MAIN_DIR)/LICENSE \ - $(BIN_DIST_MAIN_DIR)/README \ - glafp-utils/mkdirhier/mkdirhier \ - install-sh \ - config.guess \ - config.sub \ - aclocal.m4 +binary-dist:: + cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw -# -# binary-dist creates a binary bundle, set BIN_DIST_NAME -# to package name and do `make binary-dist Project=' -# (normally this just a thing you would do from the toplevel of fptools) -# -.PHONY: binary-dist-pre binary-dist binary-pack +else -BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) -BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) +BinDistDirs = includes compiler docs rts + +BIN_DIST_TOP= distrib/Makefile \ + distrib/configure-bin.ac \ + distrib/INSTALL \ + distrib/README \ + ANNOUNCE \ + LICENSE \ + install-sh \ + config.guess \ + config.sub \ + aclocal.m4 + +ifeq "$(darwin_TARGET_OS)" "1" +BIN_DIST_TOP+=mk/fix_install_names.sh +endif + +.PHONY: binary-dist-pre% binary-dist binary-pack + +binary-dist:: binary-dist-pre binary-dist-pre:: -ifeq "$(BIN_DIST)" "" - echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1 -endif - -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) - -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \ - echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - echo $(MAKE) -C $$i $(MFLAGS) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) install \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi; \ - done + $(MKDIRHIER) $(BIN_DIST_DIR)/mk + echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk + echo 'include $$(TOP)/mk/install.mk' > $(BIN_DIST_DIR)/mk/target.mk + echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk + echo '' > $(BIN_DIST_DIR)/mk/compat.mk + cp mk/package.mk $(BIN_DIST_DIR)/mk/ + cp mk/install.mk $(BIN_DIST_DIR)/mk/ + cp mk/recurse.mk $(BIN_DIST_DIR)/mk/ + $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) + $(MKDIRHIER) $(BIN_DIST_DIR)/share + +binary-dist:: + $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES + $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE) + # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES + $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES + $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES + $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES + +VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in binary-dist:: @for i in $(BIN_DIST_TOP); do \ if test -f "$$i"; then \ - echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ - cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \ + echo cp $$i $(BIN_DIST_DIR); \ + cp $$i $(BIN_DIST_DIR); \ fi; \ done; @echo "Configuring the Makefile for this project..." - touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in - cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in + echo > $(VARFILE) + echo "package = ghc" >> $(VARFILE) + echo "version = $(ProjectVersion)" >> $(VARFILE) + echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE) + echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE) + echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE) + echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE) + echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE) + echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE) + cat distrib/Makefile-bin-vars.in >> $(VARFILE) @echo "Generating a shippable configure script.." - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.in $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.in - ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf ) - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi - if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \ - cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \ - $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \ - fi + $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac + ( cd $(BIN_DIST_DIR); autoreconf ) + +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +binary-dist:: + $(MKDIRHIER) $(BIN_DIST_DIR)/icons + cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons +endif + # # binary dist'ing the documentation. -# Which documentation to build/install is hardcoded below. +# The default documentation to build/install is given below; overrideable +# via build.mk or the 'make' command-line. # +# If BINDIST_DOC_WAYS is set, use that +# If XMLDocWays is set, use that +# Otherwise, figure out what we can build based on configure results -BINDIST_DOC_WAYS = html ps - -binary-dist :: - @for i in $(BIN_DIST_DIRS); do \ - if test -d "$$i"; then \ - $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \ - echo $(MAKE) -C $$i $(MFLAGS) install-docs SGMLDocWays="html ps" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - $(MAKE) -C $$i $(MFLAGS) install-docs SGMLDocWays="html ps" \ - prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \ - bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \ - libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \ - datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \ - fi \ - done - -# Rename scripts to $i.prl and $i.sh where necessary. -# ToDo: do this in a cleaner way... +ifndef BINDIST_DOC_WAYS -ifneq "$($(Project)BinDistPrlScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \ - done +ifneq "$(XMLDocWays)" "" +BINDIST_DOC_WAYS = $(XMLDocWays) +else +ifneq "$(XSLTPROC)" "" +BINDIST_DOC_WAYS = html +ifneq "$(FOP)" "" +BINDIST_DOC_WAYS += ps pdf +else +ifneq "$(PDFXMLTEX)" "" +BINDIST_DOC_WAYS += pdf endif +ifneq "$(XMLTEX)" "" +ifneq "$(DVIPS)" "" +BINDIST_DOC_WAYS += ps +endif # DVIPS +endif # XMLTEX +endif # FOP +endif # XSLTPROC +endif # XMLDocWays + +endif # BINDIST_DOC_WAYS + +ifneq "$(DIR_DOCBOOK_XSL)" "" +.PHONY: binary-dist-doc-% + +BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d) + +binary-dist :: $(BINARY_DIST_DOC_RULES) + +$(BINARY_DIST_DOC_RULES): binary-dist-doc-%: + $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS) + $(MAKE) -C $* $(MFLAGS) install-docs \ + MAKING_BIN_DIST=1 \ + XMLDocWays="$(BINDIST_DOC_WAYS)" \ + prefix=$(BIN_DIST_DIR) \ + exec_prefix=$(BIN_DIST_DIR) \ + bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \ + libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \ + libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \ + datadir=$(BIN_DIST_DIR)/share +endif + +.PHONY: binary-dist-doc-% -ifneq "$($(Project)BinDistLibPrlScripts)" "" binary-dist:: - @for i in $($(Project)BinDistLibPrlScripts); do \ - echo "Renaming $$i to $$i.prl"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \ - done + $(MAKE) -C libraries binary-dist + endif -ifneq "$($(Project)BinDistShScripts)" "" -binary-dist:: - @for i in $($(Project)BinDistShScripts); do \ - echo "Renaming $$i to $$i.sh"; \ - $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \ - done +# Tar up the distribution and build a manifest +binary-dist :: tar-binary-dist + +.PHONY: tar-binary-dist +tar-binary-dist: + ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) ) + ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) ) + +PUBLISH_FILES = $(BIN_DIST_TARBALL) + +# Upload the distribution and documentation +ifneq "$(ISCC)" "" +WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM) +WINDOWS_INSTALLER = $(WINDOWS_INSTALLER)$(exeext) + +PUBLISH_FILES += $(WINDOWS_INSTALLER) + +binary-dist :: generate-windows-installer + +.PHONY: generate-windows-installer +generate-windows-installer :: + $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) - endif -# -# Do this separately for now -# -binary-pack:: - ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) ) - -ifneq "$(way)" "" -.PHONY: package-way-dist -package-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar ) - gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar +# Upload the distribution and documentation +ifneq "$(PublishLocation)" "" +binary-dist :: publish-binary-dist endif -ifneq "$(way)" "" -remove-way-dist:: - ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; ) +.PHONY: publish-binary-dist +publish-binary-dist :: + @for f in $(PUBLISH_FILES); do \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \ + if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \ + done \ + done + +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +# On Windows, we cannot use absoluate pathnames to rsync, because they look +# like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/ +# rather than share/, due to prep-bin-dist-mingw. +publish-binary-dist :: + $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs +else +publish-binary-dist :: + $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs endif binary-dist:: @@ -237,7 +416,7 @@ binary-dist:: # Do it like this: # # $ make -# $ make dist Project=Ghc +# $ make dist # # WARNING: `make dist' calls `make distclean' before tarring up the tree. # @@ -247,121 +426,117 @@ binary-dist:: # # Directory in which we're going to build the src dist # +SRC_DIST_NAME=ghc-$(ProjectVersion) SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME) # # Files to include in source distributions # -SRC_DIST_DIRS += docs distrib $(SUBDIRS) +SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS_INSTALL)) SRC_DIST_FILES += \ - configure.in config.guess config.sub configure \ - aclocal.m4 acconfig.h README Makefile Makefile.config install-sh \ - mk/bootstrap.mk \ - mk/boilerplate.mk mk/config.h.in mk/config.mk.in mk/opts.mk \ - mk/paths.mk mk/package.mk mk/suffix.mk mk/target.mk + configure.ac config.guess config.sub configure \ + aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \ + ghc.spec.in VERSION -dist dist-manifest dist-package :: project-check - -# clean the tree first, leaving certain extra files in place (eg. configure) -dist :: distclean +# ----------------------------------------------------------------------------- +# Source distributions -dist :: - -rm -rf $(SRC_DIST_DIR) - -$(RM) $(SRC_DIST_NAME).tar.gz - mkdir $(SRC_DIST_DIR) - mkdir $(SRC_DIST_DIR)/mk - ( cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -print \) | sed -e 's!.*!mkdir "$(SRC_DIST_DIR)/&"!' | sh ) - ( cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) $(SRC_DIST_FILES) -name CVS -prune -o -name SRC -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -name "log" -prune -o -name "*-SAVE" -prune -o -name "*.orig" -prune -o -name "*.rej" -prune -o ! -type d -print | sed -e 's!.*!$(LN_S) "$(FPTOOLS_TOP_ABS)/&" "$(SRC_DIST_DIR)/&"!' | sh ) +# A source dist is built from a complete build tree, because we +# require some extra files not contained in a darcs checkout: the +# output from Happy and Alex, for example. +# +# The steps performed by 'make dist' are as follows: +# - create a complete link-tree of the current build tree in /tmp +# - run 'make distclean' on that tree +# - remove a bunch of other files that we know shouldn't be in the dist +# - tar up first the extralibs package, then the main source package -# Automatic generation of a MANIFEST file for a source distribution -# tree that is ready to go. -dist-manifest :: - cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > MANIFEST +EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages)) -dist-package :: dist-package-tar-gz +SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2 +SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2 -SRC_DIST_PATHS = $(patsubst %, $(SRC_DIST_NAME)/%, $(SRC_DIST_FILES) $(SRC_DIST_DIRS)) +VERSION : + echo $(ProjectVersion) >VERSION -dist-package-tar-gz :: - $(TAR) chzf $(SRC_DIST_NAME)-src.tar.gz $(SRC_DIST_NAME) +dist :: VERSION -dist-package-zip :: - cd ..; $(LN_S) $(FPTOOLS_TOP_ABS) $(SRC_DIST_NAME) && \ - $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME)-src.zip $(SRC_DIST_PATHS) +dist :: + $(RM) -rf $(SRC_DIST_DIR) + $(RM) $(SRC_DIST_NAME).tar.gz + mkdir $(SRC_DIST_DIR) + ( cd $(SRC_DIST_DIR) \ + && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \ + && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \ + && $(MAKE) distclean \ + && $(RM) -rf compiler/stage[123] mk/build.mk \ + && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \ + ) + tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL) + $(RM) -rf $(EXTRA_LIBS) + tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL) + +# Upload the distribution(s) +# Retrying is to work around buggy firewalls that corrupt large file transfers +# over SSH. +ifneq "$(PublishLocation)" "" +dist :: + @for i in 0 1 2 3 4 5 6 7 8 9; do \ + echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \ + if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\ + done + @for i in 0 1 2 3 4 5 6 7 8 9; do \ + echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \ + if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\ + done +endif # ----------------------------------------------------------------------------- # HC file bundles -hc-file-bundle : project-check - $(RM) -r $(ProjectNameShort)-$(ProjectVersion) - $(LN_S) . $(ProjectNameShort)-$(ProjectVersion) - $(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler \ - $(ProjectNameShort)-$(ProjectVersion)/ghc/driver \ - $(ProjectNameShort)-$(ProjectVersion)/libraries \ - $(ProjectNameShort)-$(ProjectVersion)/hslibs \ +hc-file-bundle : + $(RM) -r ghc-$(ProjectVersion) + $(LN_S) . ghc-$(ProjectVersion) + $(FIND) ghc-$(ProjectVersion)/compiler \ + ghc-$(ProjectVersion)/utils \ + ghc-$(ProjectVersion)/compat \ + ghc-$(ProjectVersion)/libraries -follow \ \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler $(ProjectNameShort)-$(ProjectVersion)/ghc/driver $(ProjectNameShort)-$(ProjectVersion)/libraries $(ProjectNameShort)-$(ProjectVersion)/hslibs -name "*.hsc" -print` ""; do \ + for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \ fi; \ done; - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/*.hs-incl >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/Parser.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/ParserCore.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/main/ParsePkgConf.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go - tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` - -CLEAN_FILES += hc-files-to-go *-hc.tar.gz + for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ + if test "x$$f" != "x"; then \ + echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \ + fi; \ + done; + echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go + echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go + tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` # ----------------------------------------------------------------------------- +# Cleaning -DIST_CLEAN_FILES += config.cache config.status +CLEAN_FILES += hc-files-to-go *-hc.tar.gz -# -# If you've ended up using an in-place version of Happy, -# make sure it gets built early on. -# -ifeq "$(HAPPY)" "$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace" -all :: $(FPTOOLS_TOP_ABS)/happy/src/happy-inplace +DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \ + ghc.spec docs/users_guide/ug-book.xml -$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace : glafp-utils - $(MAKE) -C happy boot all -endif +# don't clean config.mk: it's needed when cleaning stuff later on +LATE_DIST_CLEAN_FILES += mk/config.mk -all :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i boot; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - $(MAKE) -C $$i all; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ - done +# VERSION is shipped in a source dist +MAINTAINER_CLEAN_FILES += VERSION -boot :: - @echo "Please use \`make all' only from the top-level, or \`make boot' followed" - @echo "by \`make all' in an individual project subdirectory (ghc, hslibs etc.)." +extraclean:: + $(RM) -rf autom4te.cache -install :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i install; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ - done - -install-docs :: - @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i install-docs; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ - done +# ----------------------------------------------------------------------------- # Turn off target.mk's rules for 'all', 'boot' and 'install'. NO_BOOT_TARGET=YES