X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=ghc%2FMakefile;h=664df24c4a0e7c42bf523b071f10452d84dc66e7;hp=894f2dfb3b48927a4a53d255e620edf03e7811d7;hb=34cc75e1a62638f2833815746ebce0a9114dc26b;hpb=c8577590bd59c65effd1f178d1b97a6a0db32851

diff --git a/ghc/Makefile b/ghc/Makefile
index 894f2df..664df24 100644
--- a/ghc/Makefile
+++ b/ghc/Makefile
@@ -1,134 +1,16 @@
+dir = ghc
+TOP = ..
+SPEC_TARGETS = 1 2 3
+include $(TOP)/mk/sub-makefile.mk
 
-TOP=..
-include $(TOP)/mk/boilerplate.mk
-include $(TOP)/mk/cabal-flags.mk
+.PHONY: 1 2 3
 
-ifeq "$(stage)" ""
-stage=1
-endif
+1:
+	+$(TOPMAKE) stage=1 all_ghc_stage1 compiler_stage1_NO_BUILD_DEPS=YES
 
-ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
-INSTALL_FLAGS =
-else
-INSTALL_FLAGS = --enable-shell-wrappers
-endif
+2:
+	+$(TOPMAKE) stage=2 all_ghc_stage2 compiler_stage2_NO_BUILD_DEPS=YES
 
-# Don't strip the inplace versions, we might need to debug them
-INPLACE_INSTALL_FLAGS += --disable-executable-stripping
-
-boot:: boot.stage.$(stage)
-
-all:: build.stage.$(stage)
-
-rebuild ::
-	-$(CABAL) clean --distpref dist-stage$(stage)
-	$(RM) -rf stage$(stage)-inplace
-	$(MAKE) boot all
-
-stage1 ::
-	$(MAKE) stage=1
-
-stage2 ::
-	$(MAKE) stage=2
-
-stage3 ::
-	$(MAKE) stage=3
-
-clean distclean::
-	-$(CABAL) clean --distpref dist-stage1
-	-$(CABAL) clean --distpref dist-stage2
-	-$(CABAL) clean --distpref dist-stage3
-	$(RM) -rf stage1-inplace
-	$(RM) -rf stage2-inplace
-	$(RM) -rf stage3-inplace
-
-# XXX This should be defined somewhere more central
-INPLACE_DATA_DIR = $(FPTOOLS_TOP_ABS)/inplace-datadir
-
-CONFIGURE_FLAGS_STAGE1 += --flags=-ghci
-
-ifeq "$(GhcWithInterpreter)" "YES"
-CONFIGURE_FLAGS_STAGE2 += --flags=ghci
-else
-CONFIGURE_FLAGS_STAGE2 += --flags=-ghci
-endif
-
-ifeq "$(GhcProfiled)" "YES"
-CONFIGURE_FLAGS_STAGE2 += --enable-executable-profiling
-endif
-ifeq "$(GhcDebugged)" "YES"
-CONFIGURE_FLAGS_STAGE2 += --ghc-option=-debug
-endif
-ifeq "$(GhcThreaded)" "YES"
-# Use threaded RTS with GHCi, so threads don't get blocked at the prompt.
-CONFIGURE_FLAGS_STAGE2 += --ghc-option=-threaded
-endif
-
-ifeq "$(BuildSharedLibs)" "YES"
-CONFIGURE_FLAGS_STAGE2 += --ghc-option=-dynamic
-endif
-
-CONFIGURE_FLAGS_STAGE3 = $(CONFIGURE_FLAGS_STAGE2)
-
-CONFIGURE_FLAGS_STAGE1 += $(USE_BOOT_CONFIGURE_FLAGS)
-CONFIGURE_FLAGS_STAGE2 += $(USE_STAGE1_CONFIGURE_FLAGS)
-CONFIGURE_FLAGS_STAGE3 += $(USE_STAGE2_CONFIGURE_FLAGS)
-
-# Allow EXTRA_HC_OPTS to be used from the command line to add options 
-# when building (e.g. -v)
-BUILD_FLAGS=$(patsubst %, --ghc-option=%, $(EXTRA_HC_OPTS))
-
-# XXX In stage2+ we should really use the inplace ghc-pkg
-# It works because installPackage doesn't actually use ghc-pkg, as there's
-# no library to register
-
-ifeq "$(stage)" "1"
-# GHC 6.9+ can handle cross-package recompilation checking, but
-# we don't rely on the bootstrapping compiler being able to do this.
-TOUCH_MAIN = $(RM) dist-stage1/build/ghc/ghc-tmp/Main.o
-endif
-
-boot.stage.%:
-	$(CABAL) configure --distpref dist-stage$*         \
-	                   $(INSTALL_DIRS_CONFIGURE_FLAGS) \
-	                   $(CONFIGURE_FLAGS_STAGE$*)      \
-	                   $(COMMON_CONFIGURE_FLAGS)       \
-	                   --libsubdir=.                   \
-	                   --datadir='$$libdir'            \
-	                   --datasubdir=.
-
-build.stage.%:
-	$(TOUCH_MAIN)
-	$(CABAL) build     --distpref dist-stage$* $(BUILD_FLAGS)
-	$(INSTALL_PACKAGE) install '$(GHC_PKG_PROG)' 'XXX/package.conf' "" \
-	                   $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace          \
-	                   $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace          \
-	                   '$$prefix'                                      \
-	                   '$(INPLACE_DATA_DIR)'                           \
-	                   '$$prefix/libexec'                              \
-	                   '$$prefix/dynlib'                               \
-	                   '$(INPLACE_DATA_DIR)'                           \
-	                   '$$prefix/doc'                                  \
-	                   '$$prefix/html'                                 \
-	                   '$$prefix/haddock'                              \
-	                   --distpref dist-stage$*                         \
-	                   $(INPLACE_INSTALL_FLAGS)                        \
-	                   $(INSTALL_FLAGS)
-
-# XXX For now we always install the stage 2 compiler
-install:
-	$(INSTALL_PACKAGE) install UNUSED UNUSED '$(DESTDIR)' '$(prefix)' \
-	                   '$(prefix)' '$(bindir)' '$(libdir)'            \
-                       '$(libexecdir)' '$(dynlibdir)' '$(libdir)'     \
-                       '$(docdir)' '$(htmldir)' '$(haddockdir)'       \
-	                   --distpref dist-stage2                         \
-	                   $(INSTALL_FLAGS)
-
-# XXX fix:
-#binary-dist:
-#	$(INSTALL_DIR)                      $(BIN_DIST_DIR)/utils/hsc2hs
-#	$(INSTALL_DATA)    Makefile         $(BIN_DIST_DIR)/utils/hsc2hs/
-#	$(INSTALL_DATA)    hsc2hs.sh        $(BIN_DIST_DIR)/utils/hsc2hs/
-#	$(INSTALL_DATA)    $(INSTALL_DATAS) $(BIN_DIST_DIR)/utils/hsc2hs/
-#	$(INSTALL_PROGRAM) $(HS_PROG)       $(BIN_DIST_DIR)/utils/hsc2hs/
+3:
+	+$(TOPMAKE) stage=3 all_ghc_stage3 compiler_stage3_NO_BUILD_DEPS=YES