X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=mk%2Fconfig.mk.in;h=d1605d1c2b5854950fe5b71a84dad19cf4c1076f;hp=24e4e4850c8d1a1e90659cc2d760d2e167fec782;hb=34cc75e1a62638f2833815746ebce0a9114dc26b;hpb=a60a1a893dcf3cbb425a4b52735cedec10b89203 diff --git a/mk/config.mk.in b/mk/config.mk.in index 24e4e48..980e493 100644 --- a/mk/config.mk.in +++ b/mk/config.mk.in @@ -25,117 +25,22 @@ # # This is one of only two files that configure generates (the other is config.h) # -# There is a section below for each project within the fptools suite -# -# PLUS -# -# a section corresponding to each of the main .mk files -# included by boilerplate.mk (see boilerplate.mk for a list). - - -################################################################################ -# -# Project-wide platform variables -# -################################################################################ - -# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine -# specifier. E.g. sparc-sun-solaris2 -# -# Build platform: the platform on which we are doing this build -# Host platform: the platform on which these binaries will run -# Target platform: the platform for which this compiler will generate code -# -# We don't support build & host being different, because the build -# process creates binaries that are run during the build, and also -# installed. -# -# If host & target are different, then we are building a compiler -# which will generate intermediate .hc files to port to the target -# architecture for bootstrapping. The libraries and stage 2 compiler -# will be built as HC files for the target system, and likely won't -# build on this host platform. -# -# Guidelines for when to use HOST vs. TARGET: -# -# - In the build system (Makefile, foo.mk), normally we should test -# $(HOSTPLATFORM). There are some cases (eg. installation), where -# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it -# doesn't matter which is used. -# -# - In the compiler itself, we should test HOST or TARGET depending -# on whether the conditional relates to the code being generated, or -# the platform on which the compiler is running. For stage 2, -# HOSTPLATFORM should be reset to be TARGETPLATFORM (we currently -# don't do this, but we should). -# -# - In the RTS and library code, we should be testing TARGET only. -# -# NOTE: cross-compiling is not well supported by the build system. -# You have to do a lot of work by hand to cross compile: see the -# section on "Porting GHC" in the Building Guide. - -HOSTPLATFORM = @HostPlatform@ -TARGETPLATFORM = @TargetPlatform@ -BUILDPLATFORM = @BuildPlatform@ -# Hack alert: -# in one or two places, we need to get at the OS version (major and -# perhaps even minor), HostOS_Full is the OS name reported by -# AC_CANONICAL_SYSTEM. -# -HostPlatform_CPP = @HostPlatform_CPP@ -HostArch_CPP = @HostArch_CPP@ -HostOS_CPP = @HostOS_CPP@ -HostOS_Full = @HostOS_Full@ -HostVendor_CPP = @HostVendor_CPP@ - -TargetPlatform_CPP = @TargetPlatform_CPP@ -TargetArch_CPP = @TargetArch_CPP@ -TargetOS_CPP = @TargetOS_CPP@ -TargetVendor_CPP = @TargetVendor_CPP@ - -BuildPlatform_CPP = @BuildPlatform_CPP@ -BuildArch_CPP = @BuildArch_CPP@ -BuildOS_CPP = @BuildOS_CPP@ -BuildVendor_CPP = @BuildVendor_CPP@ - -@HostPlatform_CPP@_HOST = 1 -@TargetPlatform_CPP@_TARGET = 1 -@BuildPlatform_CPP@_BUILD = 1 - -@HostArch_CPP@_HOST_ARCH = 1 -@TargetArch_CPP@_TARGET_ARCH = 1 -@BuildArch_CPP@_BUILD_ARCH = 1 - -@HostOS_CPP@_HOST_OS = 1 -@TargetOS_CPP@_TARGET_OS = 1 -@BuildOS_CPP@_BUILD_OS = 1 - -@HostVendor_CPP@_HOST_VENDOR = 1 -@TargetVendor_CPP@_TARGET_VENDOR = 1 -@BuildVendor_CPP@_BUILD_VENDOR = 1 - -# Leading underscores on symbol names in object files -# Valid options: YES/NO -# -LeadingUnderscore=@LeadingUnderscore@ +ifneq "$(findstring 3.7, $(MAKE_VERSION))" "" +ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" "" +$(error GNU make version 3.79.1 or later is required.) +endif +endif -# Pin a suffix on executables? If so, what (Windows only). -exeext=@exeext@ +# TOP: the top of the fptools hierarchy, absolute path. +# On Windows this is a c:/foo/bar style path. +TOP = @hardtop@ -# Windows=YES if on a Windows platform -ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" "" -Windows=YES -else -Windows=NO -endif +include $(TOP)/mk/project.mk ################################################################################ # -# project-wide flags -# -# Set of options applicable to all fptools projects +# Global configuration options # ################################################################################ @@ -146,59 +51,41 @@ BootingFromHc = @BootingFromHc@ # rather than registerised code, i.e., disable the mangler? BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@ -# Build Order: we build Happy, Haddock and Alex before GHC if they are -# in this source tree, just in case our GHC build depends on these -# local builds rather than installed versions of the tools. -# -# Build the libs first if we're bootstrapping from .hc files. -ifeq "$(BootingFromHc)" "YES" -AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs -else -AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs -endif - -# -# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this -# list is empty, then all projects present in the source tree will be built. # -ProjectsToBuild = - -# -# set ProjectsDontInstall to a list of projects which are normally built but -# not installed. +# Which ways should DocBook XML documents be built? +# options are: dvi ps pdf html chm HxS # -ProjectsDontInstall = glafp-utils nofib +XMLDocWays= -# -# Should the various project tests directories be built? -# -IncludeTestDirsInBuild=NO +# Should we build latex docs? +LATEX_DOCS = NO +# Mac OS X deployment target (to cross-compile for older OS versions) # -# Should the various project example directories be built? -# -IncludeExampleDirsInBuild=NO +MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@ +MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@ +ifneq "$(MACOSX_DEPLOYMENT_VERSION)" "" +MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \ + -isysroot $(MACOSX_DEPLOYMENT_SDK) \ + --no-builtin-fprintf +MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \ + -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK) +# We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get +# overwritten in build.mk and (b) we must not use the deployment options in +# stage 1 or we get a linker error if the bootstrap compiler is for a more +# recent OS version. # -# Which ways should DocBook XML documents be built? -# options are: dvi ps pdf html -# -XMLDocWays= +# We need --no-builtin-fprintf, as the use of the builtin function optimisation +# for fprintf together with #include "PosixSource" in the RTS leads to the +# use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2). +endif ################################################################################ # -# GHC project -# -# Set of (configurable) options needed by the ghc tree -# plus their default options (if any). -# -################################################################################ - -#--------------------------------------------------------------- -# # Variables that control how the compiler itself is built # -#--------------------------------------------------------------- +################################################################################ # The compiler used to build GHC is $(GHC). To change the actual compiler # used, re-configure with --with-ghc=. @@ -208,7 +95,7 @@ XMLDocWays= GhcCompilerWays= # Extra option flags to pass to the compiler that compiles the compiler -# (Ones that are essential are wired into ghc/compiler/Makefile) +# (Ones that are essential are wired into compiler/Makefile) # Typical options to use here: # # -DDEBUG include debugging code and assertions (will make the @@ -224,8 +111,17 @@ GhcHcOpts=-Rghc-timing # These are placed later on the command line, and may therefore # override options from $(GhcHcOpts). GhcStage1HcOpts= -GhcStage2HcOpts= -GhcStage3HcOpts= +GhcStage2HcOpts=-O2 +GhcStage3HcOpts=-O2 + +GhcProfiled=NO +GhcDebugged=NO +GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO) + +# Build shared and/or static libs? +BuildSharedLibs=@BuildSharedLibs@ +# ToDo later: +# BuildStaticLibs=@BuildStaticLibs@ # Build a compiler that will build *unregisterised* libraries and # binaries by default. Unregisterised code is supposed to compile and @@ -241,52 +137,112 @@ GhcStage3HcOpts= # the compiler you build with is generating registerised binaries), but # the stage2 compiler will be an unregisterised binary. # +ifneq "$(findstring $(HostArch_CPP), alpha hppa)" "" +GhcUnregisterised=YES +else GhcUnregisterised=NO +endif # Build a compiler with a native code generator backend # (as well as a C backend) # # Target platforms supported: # i386, powerpc -# sparc has bitrotted -ifneq "$(findstring $(HostArch_CPP), i386 powerpc)" "" -GhcWithNativeCodeGen=YES -else -GhcWithNativeCodeGen=NO -endif +# AIX is not supported +ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc))) +OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP)))) -# Include support for generating Java -GhcWithJavaGen=NO +# lazy test, because $(GhcUnregisterised) might be set in build.mk later. +GhcWithNativeCodeGen=$(strip\ + $(if $(filter YESYESNO,\ + $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO)) HaveLibDL = @HaveLibDL@ -HaveRtldNext = @HaveRtldNext@ -HaveRtldLocal = @HaveRtldLocal@ -# Include GHCi in the compiler. Default to NO for the time being. +# ArchSupportsSMP should be set iff there is support for that arch in +# includes/SMP.h +ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc))) + +# lazy test, because $(GhcUnregisterised) might be set in build.mk later. +GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO)) + +# Whether to include GHCi in the compiler. Depends on whether the RTS linker +# has support for this OS/ARCH combination. -ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)" "" +OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin))) +ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64))) + +ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES" GhcWithInterpreter=YES else GhcWithInterpreter=NO endif +# GhcEnableTablesNextToCode tells us whether the target architecture +# supports placing info tables directly before the entry code +# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for +# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised +# code or not, which may be decided by options to the compiler later. +ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" "" +GhcEnableTablesNextToCode=NO +else +GhcEnableTablesNextToCode=YES +endif + +# On Windows we normally want to make a relocatable bindist, to we +# ignore flags like libdir +ifeq "$(Windows)" "YES" +RelocatableBuild = YES +else +RelocatableBuild = NO +endif + +# When building bindists we set this to yes so that the binaries are as +# portable as possible. +BeConservative = NO + # # Building various ways? # (right now, empty if not). BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS))) BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS))) +# Interface file version (hi-boot files only) +# +# A GHC built with HscIfaceFileVersion=n will look for +# M.hi-boot-n, and only then for +# M.hi-boot. +# (It'll be happy with the latter if the former doesn't exist.) +# +# +# This variable is used ONLY for hi-boot files. Its only purpose is +# to allow you to have a single directory with multiple .hi-boot files +# for the same module, each corresponding to a different version of +# GHC. +# +# HscIfaceFileVersion is propagated to hsc via +# compiler/main/Config.hs, which is automatically generated by +# compiler/Makefile. + +HscIfaceFileVersion=6 + #------------------------------------------------------------------------------ # Options for Libraries -# What extra ways to build the libraries in +# Which directory (in libraries/) contains the integer library? +INTEGER_LIBRARY=integer-gmp + +# We build the libraries at least the "vanilla" way (way "v") +GhcLibWays = v + # In addition to the normal sequential way, the default is to also build -# profiled prelude libraries. -# When booting from .hc files, turn this off. -ifeq "$(BootingFromHc)" "YES" -GhcLibWays= -else -GhcLibWays=p +# profiled prelude libraries unless we are booting from .hc files +ifneq "$(BootingFromHc)" "YES" +GhcLibWays += p +endif + +ifeq "$(BuildSharedLibs)" "YES" +GhcLibWays += dyn endif # In addition, the RTS is built in some further variations. Ways that @@ -298,42 +254,58 @@ endif # debug_p : debugging profiled # thr_debug : debugging threaded # thr_debug_p : debugging threaded profiled +# t : ticky-ticky profiling +# debug_t : debugging ticky-ticky profiling +# l : event logging +# thr_l : threaded and event logging +# thr_debug_l : threaded and debugging and event logging # -ifeq "$(BootingFromHc)" "YES" -GhcRTSWays= -else -GhcRTSWays=thr thr_p debug +GhcRTSWays=l + +# Usually want the debug version +ifeq "$(BootingFromHc)" "NO" +GhcRTSWays += debug endif +ifeq "$(BuildSharedLibs)" "YES" +GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn +endif + +# Want the threaded versions unless we're unregisterised +# Defer the check until later by using $(if..), because GhcUnregisterised might +# be set in build.mk, which hasn't been read yet. +GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_debug thr_l,) +GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),$(if $(findstring NO, $(GhcUnregisterised)),thr_p,),) + +# We can only build GHCi threaded if we have a threaded RTS: +GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO) + # Option flags to pass to GHC when it's compiling modules in # fptools/libraries. Typically these are things like -O or # -dcore-lint or -H32m. The ones that are *essential* are wired into # the build system. # -# -O is pretty desirable, otherwise no inlining of prelude +# -O(2) is pretty desirable, otherwise no inlining of prelude # things (incl "+") happens when compiling with this compiler +# +# -XGenerics switches on generation of support code for +# derivable type classes. This is now off by default, +# but we switch it on for the libraries so that we generate +# the code in case someone importing wants it -GhcLibHcOpts=-O -Rghc-timing +GhcLibHcOpts=-O2 -XGenerics # Win32 only: Enable the RTS and libraries to be built as DLLs DLLized=@EnableWin32DLLs@ -# Win32 only: are we building a compiler that tries to reduce external -# dependencies? i.e., one that doesn't assume that the user has got -# the cygwin toolchain installed on his/her Win32 box. -# -# GHC is still dependent on GNU tools in the backend (gcc to further process -# .c/.hc/.s/.o files + 'perl' to mangle and split), but using this -# option a GHC distribution can be put together which includes a minimal -# set of these open source tools. -# -MinimalUnixDeps=@MinimalUnixDeps@ - # Strip local symbols from libraries? This can make the libraries smaller, # but makes debugging somewhat more difficult. Doesn't work with all ld's. # StripLibraries=NO +# These are the URL patterns that Haddock uses to generate the "Source +# File" links on each page. +PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE} # ---------------------------------------------------------------------------- # Object-file splitting @@ -344,123 +316,51 @@ StripLibraries=NO # system needs to do other special magic if you are # doing object-file splitting -# Don't split object files for libs if we're building DLLs, or booting from -# .hc files. -SplitObjs=YES - -ifeq "$(DLLized)" "YES" -SplitObjs=NO -endif -ifeq "$(BootingFromHc)" "YES" -SplitObjs=NO -endif -ifeq "$(GhcUnregisterised)" "YES" -SplitObjs=NO -endif -ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux" -SplitObjs=NO -endif - -# ---------------------------------------------------------------------------- -# Options for GHC's RTS - -# For an optimised RTS (you probably don't want to change these; we build -# a debugging RTS by default now. Use -package rts_debug to get it). -GhcRtsHcOpts=-O2 -GhcRtsCcOpts=-fomit-frame-pointer - -# Include the front panel code? Needs GTK+. -GhcRtsWithFrontPanel = NO - -################################################################################ -# -# libraries project -# -################################################################################ - -# Build the Haskell Readline bindings? -# -GhcLibsWithReadline=@GhcLibsWithReadline@ +ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO)) -# Libraries needed for linking with readline -LibsReadline=@LibsReadline@ +# lazy test, so that $(GhcUnregisterised) can be set in build.mk +SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\ + $(if $(filter NO,$(BootingFromHc)),\ + $(if $(filter NO,$(GhcUnregisterised)),\ + YES,\ + NO),\ + NO),\ + NO)) -# Include path to readline.h -# (no path == in standard include path) -# -ReadlineIncludePath= +# By default, enable SplitObjs for the libraries if this build supports it +SplitObjs=$(SupportsSplitObjs) # Math library LIBM=@LIBM@ -# Build the ObjectIO ? -# -GhcLibsWithObjectIO=@GhcLibsWithObjectIO@ - -# Build the Haskell OpenGL binding? -# -GhcLibsWithOpenGL=@GhcLibsWithOpenGL@ -GLU_CFLAGS=@GLU_CFLAGS@ -GLU_LIBS=@GLU_LIBS@ - -# Build the Haskell OpenAL binding? -# -GhcLibsWithOpenAL=@GhcLibsWithOpenAL@ - -# Build the Haskell GLUT binding? -# -GhcLibsWithGLUT=@GhcLibsWithGLUT@ -GLUT_LIBS=@GLUT_LIBS@ - -# X11 stuff -# -GhcLibsWithX11=@GhcLibsWithX11@ -X_CFLAGS=@X_CFLAGS@ -X_LIBS=@X_LIBS@ - # .NET interop support? # -DotnetSupport=@DotnetSupport@ +DotnetSupport=NO # Build unix package? # GhcLibsWithUnix=@GhcLibsWithUnix@ -################################################################################ -# -# happy project -# -# Happy specific options -# -################################################################################ - -# The compiler you'd like to use to compile Happy -WithHappyHc = @WithHc@ +# ---------------------------------------------------------------------------- +# Options for GHC's RTS -# HappyHcOpts gives the flags to pass to the Haskell compiler used -# to compile the Happy sources with. -# -HappyHcOpts = -O +# For an optimised RTS (you probably don't want to change these; we build +# a debugging RTS by default now. Use -debug to get it). +GhcRtsHcOpts=-optc-O2 +GhcRtsCcOpts=-fomit-frame-pointer -################################################################################ -# -# haggis project -# -# Haggis specific options -# -################################################################################ +# Include the front panel code? Needs GTK+. +GhcRtsWithFrontPanel = NO -################################################################################ -# -# greencard project -# -# GreenCard specific options -# -################################################################################ +# Include support for CPU performance counters via the PAPI library in the RTS? +# (PAPI: http://icl.cs.utk.edu/papi/) +GhcRtsWithPapi = NO +PapiLibDir= +PapiIncludeDir= ################################################################################ # -# nofib project +# nofib # # nofib specific options # @@ -487,13 +387,8 @@ NoFibWays = $(GhcLibWays) # Haskell compiler options for nofib NoFibHcOpts = -O -# ============================================================================== -# -# END OF PROJECT-SPECIFIC STUFF -# -# Now come the generic configuration options -# -# ============================================================================== +# Number of times to run each program +NoFibRuns = 5 ################################################################################ # @@ -513,94 +408,125 @@ NoFibHcOpts = -O DEFAULT_TMPDIR = /tmp ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32" -DEFAULT_TMPDIR = C:/TEMP +DEFAULT_TMPDIR = /C/TEMP endif ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" -DEFAULT_TMPDIR = C:/TEMP +DEFAULT_TMPDIR = /C/TEMP endif -# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path). -FPTOOLS_TOP_ABS = @hardtop@ -# The platform specific version of 'hardtop'. -FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@ - -# -# Installation directories, we don't use half of these, -# but since the configure script has them on offer while -# passing through, we might as well set them. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -bindir = @bindir@ -datadir0 = @datadir@ -libdir0 = @libdir@ -includedir = @includedir@ -oldincludedir = @oldincludedir@ -mandir = @mandir@ - -ifeq "$(Windows)" "YES" - -ifeq "$(strip $(prefix))" "" -prefix = c:/ghc -endif +BIN_DIST_TOPDIR_ABS=$(TOP) +BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME) + +BIN_DIST_NAME=ghc-$(ProjectVersion) +BIN_DIST_TAR=$(TOP)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar +BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2 +BIN_DIST_PREP_DIR=$(TOP)/bindist-prep +BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME) +BIN_DIST_LIST=$(TOP)/bindist-list + +# Definition of installation directories, we don't use half of these, but since +# the configure script has them on offer while passing through, we might as well +# set them. Note that we have to be careful, because the GNU coding standards +# have changed a bit over the course of time, and autoconf development reflects +# this. +# +# A little bit of history regarding autoconf and GNU coding standards, use this +# as a cheat-sheet for the stuff below: +# +# variable | default < 2.60 | default >= 2.60 +# ------------+--------------------+-------------------------------------- +# exec_prefix | ${prefix} | ${prefix} +# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib +# datarootdir | NONE! | ${prefix}/share +# datadir | ${prefix}/share | ${datarootdir} +# infodir | ${prefix}/info | ${datarootdir}/info +# mandir | ${prefix}/man | ${datarootdir}/man +# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME} +# htmldir | NONE! | ${docdir} +# dvidir | NONE! | ${docdir} +# pdfdir | NONE! | ${docdir} +# psdir | NONE! | ${docdir} +# +# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the +# string "${docdir}", not the value of docdir! This is crucial for the GNU +# coding standards. + +# This gets used in the default docdir when autoconf >= 2.60 is used +PACKAGE_TARNAME := @PACKAGE_TARNAME@ + +prefix := @prefix@ + +# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag. +# However, in order to support older autoconf's we don't use it. +# datarootdir is set lower down instead. +# But, as datadir is defined in terms of datarootdir, we also need to +# set it to the value (if any) that configure gives it here. +datarootdir := @datarootdir@ + +exec_prefix := @exec_prefix@ +bindir := @bindir@ +datadir0 := @datadir@ +libdir0 := @libdir@ +includedir := @includedir@ +mandir := @mandir@ +dynlibdir := @libdir@ + +ifeq "$(RelocatableBuild)" "YES" # Hack: our directory layouts tend to be different on Windows, so # hack around configure's bogus assumptions here. -datadir = $(prefix) -libdir = $(prefix) +datarootdir := $(prefix) +datadir := $(prefix)/lib +libdir := $(prefix)/lib + +docdir := $(prefix)/doc +htmldir := $(docdir) +dvidir := $(docdir) +pdfdir := $(docdir) +psdir := $(docdir) else -# -# Unix: override libdir and datadir to put project-specific stuff in +# Unix: override libdir and datadir to put ghc-specific stuff in # a subdirectory with the version number included. # -libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0)) -datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0)) +# datadir is set to libdir here as GHC needs package.conf and unlit +# to be in the same place (and things like ghc-pkg need to agree on +# where package.conf is, so we just set it globally). +# +datarootdir := $(datadir0) +libdir := $(libdir0)/ghc-$(ProjectVersion) +datadir := $(libdir) + +# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags. +# However, in order to support older autoconf's we don't use them. + +#docdir := @docdir@ +#htmldir := @htmldir@ +#dvidir := @dvidir@ +#pdfdir := @pdfdir@ +#psdir := @psdir@ + +docdir := $(datarootdir)/doc/ghc +htmldir := $(docdir) +dvidir := $(docdir) +pdfdir := $(docdir) +psdir := $(docdir) endif # Windows +headerdir := $(libdir)/include + # Default place for putting interface files is $(libdir) # (overriden for packages in package.mk) ifacedir = $(libdir) -# -# Default values for most of the above are only set if -# they weren't configured to anything in particular -# via the configure script. (i.e., we make no assumption -# that the autoconf-generated script will assign defaults -# to all of the above). -# -ifeq "$(strip $(exec_prefix))" "" -exec_prefix = $(prefix) -endif -ifeq "$(strip $(bindir))" "" -bindir = $(exec_prefix)/bin -endif - -# # NOTE: by intention, libexecdir and libdir point to # the same place. # => Only way to override this is to set libexecdir= on the command line. # (NOTE: configure script setting is ignored). libexecdir = $(libdir) -ifeq "$(strip $(datadir))" "" -datadir = $(prefix)/share -endif -ifeq "$(strip $(libdir))" "" -libdir = $(exec_prefix)/lib -endif -ifeq "$(strip $(includedir))" "" -includedir = $(prefix)/include -endif -ifeq "$(strip $(oldincludedir))" "" -oldincludedir = /usr/include -endif -ifeq "$(strip $(mandir))" "" -mandir = $(prefix)/man -endif - #----------------------------------------------------------------------------- # install configuration @@ -622,8 +548,23 @@ INSTALL_PROGRAM = $(INSTALL) -m 755 INSTALL_SCRIPT = $(INSTALL) -m 755 INSTALL_SHLIB = $(INSTALL) -m 755 INSTALL_DATA = $(INSTALL) -m 644 +INSTALL_HEADER = $(INSTALL) -m 644 +INSTALL_MAN = $(INSTALL) -m 644 INSTALL_DIR = $(MKDIRHIER) +# +# runhaskell and hsc2hs are special, in that other compilers besides +# GHC might provide them. Systems with a package manager often come +# with tools to manage this kind of clash, e.g. RPM's +# update-alternatives. When building a distribution for such a system, +# we recommend setting both of the following to 'YES'. +# +# NO_INSTALL_RUNHASKELL = YES +# NO_INSTALL_HSC2HS = YES +# +# NB. we use negative tests here because for binary-distributions we cannot +# test build-time variables at install-time, so they must default to on. + # ----------------------------------------------------------------------------- # Utilities programs: flags @@ -637,19 +578,13 @@ INSTALL_DIR = $(MKDIRHIER) # # SRC_HC_OPTS += -O -SRC_HC_OPTS += -H16m -O +SRC_HC_OPTS += -H32m -O # These flags make flex 8-bit SRC_FLEX_OPTS += -8 -SRC_INSTALL_BIN_OPTS += -s - -# lint gets all CPP's flags too -SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS) -WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS - # Default fptools options for dllwrap. -SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32 +SRC_BLD_DLL_OPTS += --target=i386-mingw32 # Flags for CPP when running GreenCard on .pgc files GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__ @@ -657,50 +592,104 @@ GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__ ################################################################################ # -# Utilities programs: where to find them +# Layout of the source tree # ################################################################################ -#----------------------------------------------------------------------------- -# FPtools Utility locations - -# By default, the various utils needed to be build ghc and chums -# is set up to point to the utils/ directory. Define here the -# path prefix for the utilities. Notice that it's a prefix with -# a trailing slash, so that it can be concatenated directly on -# front of a program name; if it's not set then we just look -# along the shell's $(PATH) -# -# If instead you want to use installed or your own versions of these, -# override the various *_PREFIX in build.mk, i.e., having the following -# in build.mk: -# -# MKDEPENDC_PREFIX= -# -# will force `make' to rummage around in your PATH to find `mkdependC' (not -# sure it would need it in the first place, but still). -# -GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils - -SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/ -MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/ -LTX_PREFIX = $(GLAFP_UTILS)/ltx/ -RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/ -VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/ -SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/ -ETAGS_PREFIX = $(GLAFP_UTILS)/etags/ -LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/ -MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/ -DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/ +# Here we provide defines for the various directories in the source tree, +# so we can move things around more easily. A define $(GHC_FOO_DIR) +# indicates a directory relative to the top of the source tree. + +GHC_UTILS_DIR = utils +GHC_INCLUDE_DIR = includes +GHC_COMPILER_DIR = compiler +GHC_PROG_DIR = ghc +GHC_RTS_DIR = rts +GHC_DRIVER_DIR = driver +GHC_COMPAT_DIR = compat + +GHC_MKDEPENDC_DIR = $(GHC_UTILS_DIR)/mkdependC +GHC_LTX_DIR = $(GHC_UTILS_DIR)/ltx +GHC_RUNTEST_DIR = $(GHC_UTILS_DIR)/runstdtest +GHC_LNDIR_DIR = $(GHC_UTILS_DIR)/lndir +GHC_MKDIRHIER_DIR = $(GHC_UTILS_DIR)/mkdirhier +GHC_DOCBOOK_DIR = $(GHC_UTILS_DIR)/docbook +GHC_UNLIT_DIR = $(GHC_UTILS_DIR)/unlit +GHC_HP2PS_DIR = $(GHC_UTILS_DIR)/hp2ps +GHC_HSTAGS_DIR = $(GHC_UTILS_DIR)/hasktags +GHC_GHCTAGS_DIR = $(GHC_UTILS_DIR)/ghctags +GHC_HSC2HS_DIR = $(GHC_UTILS_DIR)/hsc2hs +GHC_TOUCHY_DIR = $(GHC_UTILS_DIR)/touchy +GHC_PKG_DIR = $(GHC_UTILS_DIR)/ghc-pkg +GHC_GENPRIMOP_DIR = $(GHC_UTILS_DIR)/genprimopcode +GHC_GENAPPLY_DIR = $(GHC_UTILS_DIR)/genapply +GHC_CABAL_DIR = $(GHC_UTILS_DIR)/ghc-cabal +GHC_MANGLER_DIR = $(GHC_DRIVER_DIR)/mangler +GHC_SPLIT_DIR = $(GHC_DRIVER_DIR)/split +GHC_SYSMAN_DIR = $(GHC_RTS_DIR)/parallel -HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/ +# ----------------------------------------------------------------------------- +# Names of programs in the GHC tree +# +# xxx_PGM the name of an executable, without the path +# xxx the executable relative to the current dir + +GHC_UNLIT_PGM = unlit$(exeext) +GHC_HP2PS_PGM = hp2ps$(exeext) +GHC_HSTAGS_PGM = hasktags$(exeext) +GHC_GHCTAGS_PGM = ghctags$(exeext) +GHC_HSC2HS_PGM = hsc2hs$(exeext) +GHC_TOUCHY_PGM = touchy$(exeext) +GHC_MANGLER_PGM = ghc-asm +GHC_SPLIT_PGM = ghc-split +GHC_SYSMAN_PGM = SysMan +GHC_GENPRIMOP_PGM = genprimopcode$(exeext) +GHC_GENAPPLY_PGM = genapply$(exeext) +GHC_CABAL_PGM = ghc-cabal$(exeext) +GHC_PKG_PGM = ghc-pkg$(exeext) +GHC_MKDEPENDC_PGM = mkdependC +GHC_LTX_PGM = ltx$(exeext) +GHC_MKDIRHIER_PGM = mkdirhier +GHC_LNDIR_PGM = lndir +GHC_RUNTEST_PGM = runstdtest +GHC_DUMMY_GHC_PGM = dummy-ghc$(exeext) -LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/ +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +GHC_CP = "xcopy /y" +GHC_PERL = perl +else +GHC_CP = $(CP) +GHC_PERL = $(PERL) +endif -UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/ -HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/ -HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/ -HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ +HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM) +HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM) +MANGLER = $(INPLACE_LIB)/$(GHC_MANGLER_PGM) +SPLIT = $(INPLACE_LIB)/$(GHC_SPLIT_PGM) +SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM) +LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM) +LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM) +RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM) + +INPLACE = inplace +INPLACE_BIN = $(INPLACE)/bin +INPLACE_LIB = $(INPLACE)/lib +INPLACE_MINGW = $(INPLACE)/mingw + +UNLIT = $(INPLACE_LIB)/$(GHC_UNLIT_PGM) +TOUCHY = $(INPLACE_LIB)/$(GHC_TOUCHY_PGM) +MKDIRHIER = $(INPLACE_BIN)/$(GHC_MKDIRHIER_PGM) +MKDEPENDC = $(INPLACE_BIN)/$(GHC_MKDEPENDC_PGM) +GHC_CABAL_INPLACE = $(INPLACE_BIN)/$(GHC_CABAL_PGM) +GENAPPLY_INPLACE = $(INPLACE_BIN)/$(GHC_GENAPPLY_PGM) +GHC_PKG_INPLACE = $(INPLACE_BIN)/$(GHC_PKG_PGM) +GHCTAGS_INPLACE = $(INPLACE_BIN)/$(GHC_GHCTAGS_PGM) +HSC2HS_INPLACE = $(INPLACE_BIN)/$(GHC_HSC2HS_PGM) +GENPRIMOP_INPLACE = $(INPLACE_BIN)/$(GHC_GENPRIMOP_PGM) +DUMMY_GHC_INPLACE = $(INPLACE_BIN)/$(GHC_DUMMY_GHC_PGM) + +GENERATED_FILE = chmod a-w +EXECUTABLE_FILE = chmod +x #----------------------------------------------------------------------------- # Haskell compilers and mkdependHS @@ -714,12 +703,52 @@ HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/ # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead # (because the version numbers have to be calculated). -GHC = @WithGhc@ +GHC := @WithGhc@ +# If we have a make dependency on c:/ghc/ghc, and the file is actually +# called c:/ghc/ghc.exe, then make will think that ghc doesn't exist +# and that it doesn't know how to create it. +ifneq "$(wildcard $(GHC).exe)" "" +GHC := $(GHC).exe +endif + GhcDir = $(dir $(GHC)) + +# Set to YES if $(GHC) has the editline package installed +GhcHasEditline = @GhcHasEditline@ + +HBC = @HBC@ +NHC = @NHC@ + +# Sometimes we want to invoke ghc from the build tree in different +# places (eg. it's handy to have a nofib & a ghc build in the same +# tree). We can refer to "this ghc" as $(GHC_INPLACE): + +GHC_INPLACE = $(GHC_STAGE1) + +GHC_STAGE0_ABS = $(GHC) +GHC_STAGE1_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage1$(exeext) +GHC_STAGE2_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage2$(exeext) +GHC_STAGE3_ABS = $(TOP)/$(INPLACE_BIN)/ghc-stage3$(exeext) + +GHC_STAGE0 = $(GHC) +GHC_STAGE1 = $(INPLACE_BIN)/ghc-stage1$(exeext) +GHC_STAGE2 = $(INPLACE_BIN)/ghc-stage2$(exeext) +GHC_STAGE3 = $(INPLACE_BIN)/ghc-stage3$(exeext) + +# Install stage 2 by default, can be changed to 3 +INSTALL_GHC_STAGE=2 + +BOOTSTRAPPING_CONF = libraries/bootstrapping.conf + +INPLACE_PACKAGE_CONF = $(INPLACE_LIB)/package.conf + GhcVersion = @GhcVersion@ +GhcPatchLevel = @GhcPatchLevel@ GhcMajVersion = @GhcMajVersion@ GhcMinVersion = @GhcMinVersion@ -GhcPatchLevel = @GhcPatchLevel@ + +ghc_ge_607 = @ghc_ge_607@ +ghc_ge_609 = @ghc_ge_609@ # Canonicalised ghc version number, used for easy (integer) version # comparisons. We must expand $(GhcMinVersion) to two digits by @@ -730,24 +759,6 @@ else GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion) endif -# Set to YES if $(GHC) has the readline package installed -GhcHasReadline = @GhcHasReadline@ - -HBC = @HBC@ -NHC = @NHC@ - -HC = @WithHc@ -MKDEPENDHS = $(GHC) - -# Sometimes we want to invoke ghc from the build tree in different -# projects (eg. it's handy to have a nofib & a ghc build in the same -# tree). We can refer to "this ghc" as $(GHC_INPLACE): - -GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace -GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace -GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace -GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace - #----------------------------------------------------------------------------- # C compiler # @@ -764,7 +775,6 @@ ifneq "$(strip $(UseGcc))" "YES" CC = cc else CC = $(WhatGccIsCalled) - GccDir = $(dir $(WhatGccIsCalled)) endif endif @@ -775,8 +785,8 @@ ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux" SRC_CC_OPTS += -G0 endif -# Solaris2 strikes again. -unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@ +SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS))) +SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d)) #----------------------------------------------------------------------------- # GMP Library (version 2.0.x or above) @@ -784,26 +794,18 @@ unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@ HaveLibGmp = @HaveLibGmp@ LibGmp = @LibGmp@ -#----------------------------------------------------------------------------- -# Mingwex Library -# -HaveLibMingwEx = @HaveLibMingwEx@ +GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@ +GMP_LIB_DIRS=@GMP_LIB_DIRS@ #----------------------------------------------------------------------------- -# HaskellSupport framework (Mac OS X) +# GMP framework (Mac OS X) # -HaveFrameworkHaskellSupport = @HaveFrameworkHaskellSupport@ +HaveFrameworkGMP = @HaveFrameworkGMP@ #----------------------------------------------------------------------------- -# Regex library -# (if present in libc use that one, otherwise use the one in the tree) +# Mingwex Library # -HavePosixRegex = @HavePosixRegex@ - -#----------------------------------------------------------------------------- -# GTK+ - -GTK_CONFIG = @GTK_CONFIG@ +HaveLibMingwEx = @HaveLibMingwEx@ #----------------------------------------------------------------------------- # Flex (currently unused, could be moved to glafp-utils) @@ -831,13 +833,14 @@ CTAGS = $(ETAGS) # RAWCPP_FLAGS = -undef -traditional FIND = @FindCmd@ +SORT = @SortCmd@ INSTALL = @INSTALL@ # # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback # install-sh script (if chosen). This not terribly useful to us, so we convert # it into an abs. path. # -INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL)) +INSTALL := $(subst .././install-sh,$(TOP)/install-sh,$(INSTALL)) LATEX = latex HEVEA = hevea HACHA = hacha @@ -855,12 +858,17 @@ RM = rm -f SED = @SedCmd@ SHELL = /bin/sh +LD = @LdCmd@ + # Some ld's support the -x flag and some don't, so the configure # script detects which we have and sets LdXFlag to "-x" or "" # respectively. -LD = @LdCmd@ LD_X = @LdXFlag@ +# GNU ld supports input via a linker script, which is useful to avoid +# overflowing command-line length limits. +LdIsGNULd = @LdIsGNULd@ + # # In emergency situations, REAL_SHELL is used to perform shell commands # from within the ghc driver script, by scribbling the command line to @@ -869,7 +877,7 @@ LD_X = @LdXFlag@ # The reason for having to do this is that overly long command lines # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris # 2.5.1), which is why this backdoor is provided. The situation of overly -# long command lines is either encountered while doing `make boot' in ghc/compiler, +# long command lines is either encountered while doing `make boot' in compiler/, # or when linking the compiler binary (`hsc'). # # We do not use SHELL to execute long commands, as `make' will more than likely @@ -886,9 +894,12 @@ LD_X = @LdXFlag@ REAL_SHELL=$(SHELL) SIZE = size STRIP = strip +PATCH = @PatchCmd@ TAR = @TarCmd@ ZIP = zip +HSCOLOUR = @HSCOLOUR@ + # # This is special to literate/, ToDo: add literate-specific # configure setup to literate/. @@ -903,6 +914,13 @@ TIME = @TimeCmd@ TROFF = troff UNAME = uname +# GTK+ +GTK_CONFIG = @GTK_CONFIG@ + +# Set this if you want to use Inno Setup to build a Windows installer +# when you make a bindist +ISCC = + #----------------------------------------------------------------------------- # DocBook XML stuff @@ -922,26 +940,9 @@ XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \ #----------------------------------------------------------------------------- # FPtools support software -# Stuff from fptools/glafp-utils -MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC -LTX = $(LTX_PREFIX)ltx -MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier -LNDIR = $(LNDIR_PREFIX)lndir -ETAGS = $(ETAGS_PREFIX)etags -VERBATIM = $(VERBATIM_PREFIX)verbatim -SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb -RUNTEST = $(RUNTEST_PREFIX)runstdtest -LX = @LxCmd@ - BLD_DLL = dllwrap # -# .NET support software -# -ILX2IL = ilx2il -ILASM = ilasm - -# # ghc-pkg # GHC_PKG = @GhcPkgCmd@ @@ -960,11 +961,11 @@ HAPPY_VERSION = @HappyVersion@ # # Options to pass to Happy when we're going to compile the output with GHC # -GHC_HAPPY_OPTS = -agc +SRC_HAPPY_OPTS = -agc --strict # Temp. to work around performance problems in the HEAD around 8/12/2003, # A Happy compiled with this compiler needs more stack. -SRC_HAPPY_OPTS = +RTS -K2m -RTS +SRC_HAPPY_OPTS += +RTS -K2m -RTS # # Alex @@ -974,37 +975,19 @@ ALEX_VERSION = @AlexVersion@ # # Options to pass to Happy when we're going to compile the output with GHC # -GHC_ALEX_OPTS = -g - -# -# Haddock -# -HADDOCK = @HaddockCmd@ -HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace +SRC_ALEX_OPTS = -g -# -# Stuff from fptools/literate -# -LIT2PGM = $(LITERATE_PREFIX)lit2pgm -LIT2HTML = $(LITERATE_PREFIX)lit2html -LIT2LATEX = $(LITERATE_PREFIX)lit2latex -MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit -LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog -LIT2TEXT = $(LITERATE_PREFIX)lit2text - -# -# Stuff from fptools/ghc/utils -# -UNLIT = $(UNLIT_PREFIX)unlit$(exeext) -HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext) -HSTAGS = $(HSTAGS_PREFIX)hasktags -HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace +# Should we build haddock docs? +HADDOCK_DOCS = YES +# And HsColour the sources? +ifeq "$(HSCOLOUR)" "" +HSCOLOUR_SRCS = NO +else +HSCOLOUR_SRCS = YES +endif # -# Options for the compiling different `ways'. Various projects within -# the glorious fptools tree support building in various user-configured -# ways. For instance, you could set up one `way' such that the prelude -# libraries all were built with the option -ffoldr-build-on. +# Options for compiling in different `ways'. # # To configure up your own way, have a look at some of the standard ways # such as profiling, and create your own set of WAY_*_OPTS defs below. @@ -1014,15 +997,6 @@ HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # # -# IMPORTANT! The WAYS variable configures the different `ways' -# you want to build a project (or maybe just parts of it, as is -# the case for ghc/). This variable is intended set inside the -# project mk setup, enforcing a global fptools WAYS is a bit too -# much (do you *really* want to build glafp-utils the profiled-concurrent -# way?) -# - -# # Definitions of the different ways: # # * their name: @@ -1036,20 +1010,20 @@ HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace # # The ways currently defined. # -ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B +ALL_WAYS=v p t l s mp mg debug dyn thr thr_l debug_dyn thr_dyn thr_debug_dyn thr_p thr_debug thr_debug_l USER_WAYS=a b c d e f g h j k l m n o A B # -# The following ways currently have treated specially, p u t mg, +# The following ways currently have treated specially, p t mg, # as the driver script treats these guys specially and needs to carefully be told # about the options for these. Hence, we hide the required command line options -# for these in the ghc/driver, as this is the only place they are needed. +# for these in the driver, as this is the only place they are needed. # # If you want to add to these default options, fill in the variables below: -# Way 'i': -WAY_i_NAME=ILX -WAY_i_HC_OPTS= -filx -fruntime-types +# Way 'v': +WAY_v_NAME=vanilla +WAY_v_HC_OPTS= # Way 'p': WAY_p_NAME=profiling @@ -1059,13 +1033,9 @@ WAY_p_HC_OPTS= -prof WAY_t_NAME=ticky-ticky profiling WAY_t_HC_OPTS= -ticky -# Way `u': -WAY_u_NAME=unregisterized (using portable C only) -WAY_u_HC_OPTS=-unreg - -# Way `s': -WAY_s_NAME=threads (for SMP) -WAY_s_HC_OPTS=-smp +# Way 'l': +WAY_l_NAME=event logging +WAY_l_HC_OPTS= -eventlog # Way `mp': WAY_mp_NAME=parallel @@ -1087,6 +1057,10 @@ WAY_thr_HC_OPTS=-optc-DTHREADED_RTS WAY_thr_p_NAME=threaded profiled WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof +# Way 'thr_l': +WAY_thr_l_NAME=threaded event logging +WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog + # Way 'debug': WAY_debug_NAME=debug WAY_debug_HC_OPTS=-optc-DDEBUG @@ -1095,14 +1069,39 @@ WAY_debug_HC_OPTS=-optc-DDEBUG WAY_debug_p_NAME=debug profiled WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof +# Way 'debug_t': +WAY_debug_t_NAME=debug ticky-ticky profiling +WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG + # Way 'thr_debug': WAY_thr_debug_NAME=threaded WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG # Way 'thr_debug_p': -WAY_thr_debug_p_NAME=threaded +WAY_thr_debug_p_NAME=threaded debug profiling WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof +# Way 'thr_debug_l': +WAY_thr_debug_l_NAME=threaded debug event logging +WAY_thr_debug_l_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -eventlog + +# Way 'dyn': build dynamic shared libraries +WAY_dyn_NAME=dyn +WAY_dyn_HC_OPTS=-fPIC -dynamic +WAY_dyn_LIB_TARGET=libHSrts-gcc661.so + +# Way 'thr_dyn': +WAY_thr_dyn_NAME=thr_dyn +WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS + +# Way 'thr_debug_dyn': +WAY_thr_debug_dyn_NAME=thr_dyn +WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG + +# Way 'debug_dyn': +WAY_debug_dyn_NAME=thr_dyn +WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG + # # Add user-way configurations here: # @@ -1173,3 +1172,26 @@ WAY_o_HC_OPTS= # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31 # SplitObjs=NO +################################################################################ +# +# Library configure arguments +# +################################################################################ + +CONFIGURE_ARGS = @CONFIGURE_ARGS@ + +################################################################################ +# +# Bindist testing directory +# +################################################################################ + +ifeq "$(Windows)" "YES" +BIN_DIST_INST_SUBDIR = "install dir" +else +# I very much doubt that paths with spaces will work on Unix +BIN_DIST_INST_SUBDIR = installed +endif + +BIN_DIST_INST_DIR = $(TOP)/bindisttest/$(BIN_DIST_INST_SUBDIR) +