X-Git-Url: http://git.megacz.com/?p=ghc-hetmet.git;a=blobdiff_plain;f=mk%2Fpaths.mk;h=aff12743bc458c1bb81e07cda5cb5d1d85e3c141;hp=8c9f0363fe1dfbfa729166c5a258cdad6058b1a0;hb=d81eedc942376d81428293a67e99a80676222e39;hpb=401520dba49613468a8321ea49f2102dfbbac991 diff --git a/mk/paths.mk b/mk/paths.mk index 8c9f036..aff1274 100644 --- a/mk/paths.mk +++ b/mk/paths.mk @@ -1,105 +1,47 @@ -################################################################################# +################################################################################ # # paths.mk # # This file defines Make variables for standard directories # and file lists # -################################################################################# - - -#----------------------------------------------------------------- -# -# Installation setup -# - -#----------------------------------------------------------------------------- -# install configuration -# -# The install standard target is guided by the following four variables -# -# INSTALL_PROGS (installed in $(bindir)) -# INSTALL_LIBS (installed in $(libdir)) -# INSTALL_LIBEXECS (installed in $(libexecdir)) -# INSTALL_DATAS (installed in $(datadir)) -# -# see target.mk for more information. -# - -# -# Setting user/group ownership for the installed entities -# -# this stuff about "who" does the installing doesn't have make vars -# as it is not intended to be run-time changeable. -# -ifneq "$(OWNER)" "" -INSTALL_OWNER = -o $(OWNER) -else -INSTALL_OWNER = -endif - -ifneq "$(GROUP)" "" -INSTALL_GROUP = -g $(GROUP) -else -INSTALL_GROUP = -endif - -SRC_INSTALL_OPTS += $(INSTALL_OWNER) $(INSTALL_GROUP) - -# -# Invocations of `install' for the three different classes -# of targets: -# - -INSTALL_PROGRAM = $(INSTALL) -m 755 -INSTALL_SCRIPT = $(INSTALL) -m 755 -INSTALL_DATA = $(INSTALL) -m 644 -INSTALL_DIR = $(FPTOOLS_TOP)/glafp-utils/mkdirhier/mkdirhier +################################################################################ -# -# The install variables does not have any defaults, -# what files to install have to be specified in the Makefiles. -# -#INSTALL_PROGS += $(HS_PROG) $(C_PROG) -#INSTALL_LIBS += $(LIBRARY) -#INSTALL_DATAS += $(HS_IFACES) - -################################################################################# +################################################################################ # # Standard variable names # -################################################################################# - -# -# The fptools mk setup defines a set of standard names which are used by the standard -# targets provided by mk. One example of this is the use of standard names -# for specifying what files to compile, their intermediate/object code, and -# the name of the final executable. Based on the settings of these variables, the -# standard targets will generate/expand rules that automatically compile and +################################################################################ +# The fptools mk setup defines a set of standard names which are used +# by the standard targets provided by mk. One example of this is the +# use of standard names for specifying what files to compile, their +# intermediate/object code, and the name of the final +# executable. Based on the settings of these variables, the standard +# targets will generate/expand rules that automatically compile and # link your program. # # The general rules: -# +# # SRCS - sources, might be prefixed to indicate what type of source # they are. # OBJS - object files (possibly prefixed). # # PROG - name of final executable - -# We attempt to automatically devine the list of sources $(SRCS) to -# compile by looking in the current directory. This is complicated by -# the fact that a .hsc file gives rise to a .hs file (which needs to -# be automatically included in $(SRCS)), but the .hs file might -# already be present in the current directory and we don't want to -# compile it twice. - -# So we figure out the sources in three stages: first figure out -# what's in the current directory (this is $(PRE_SRCS)). Then figure -# out all the "derived" sources (eg. A.hsc generates A.hs and -# A_hsc.c), and finally put all these together and remove duplicates -# (GNU make's handy sort function does the duplicate removing). # -# BOOT_SRCS: list of machine generated Haskell modules. +# We attempt to automatically devine the list of sources $(SRCS) to +# compile by looking in the current directory (and possibly other +# directories which may be specified by setting the $(ALL_DIRS) +# variable). This is complicated by the fact that some files are +# derived from other files: eg. .hsc files give rise to -hsc.c and +# -hsc.h files, .ly files give rise to .hs files, and .hs files give +# rise to .hc files sometimes. + +# So we figure out the sources in three stages: first figure out what +# sources we can find (this is $(ALL_SRCS)). Then figure out all the +# "derived" sources (eg. A.hsc generates A.hs and A_hsc.c), and +# finally put all these together and remove duplicates (GNU make's +# handy sort function does the duplicate removing). + # HS_SRCS: list of Haskell modules you want to compile. # (also use by depend rule). # HS_OBJS: list of corresponding object files @@ -108,41 +50,135 @@ INSTALL_DIR = $(FPTOOLS_TOP)/glafp-utils/mkdirhier/mkdirhier # (caveat: assuming no funny use of -hisuf and that # file name and module name match) -PRE_SRCS = $(wildcard *.lhs *.hs *.c *.prl *.lprl *.lit *.verb *.hsc) - -HSC_SRCS = $(filter %.hsc, $(PRE_SRCS)) -DERIVED_SRCS = $(patsubst %.hsc, %.hs, $(HSC_SRCS)) \ - $(patsubst %.hsc, %_hsc.c, $(HSC_SRCS)) \ - $(patsubst %.hsc, %_hsc.h, $(HSC_SRCS)) +ALL_SRCS = $(wildcard $(patsubst ./%, %, \ + $(patsubst %,%/*.hs, . $(ALL_DIRS)) \ + $(patsubst %,%/*.lhs, . $(ALL_DIRS)) \ + $(patsubst %,%/*.hs-boot, . $(ALL_DIRS)) \ + $(patsubst %,%/*.lhs-boot, . $(ALL_DIRS)) \ + $(patsubst %,%/*.y, . $(ALL_DIRS)) \ + $(patsubst %,%/*.ly, . $(ALL_DIRS)) \ + $(patsubst %,%/*.x, . $(ALL_DIRS)) \ + $(patsubst %,%/*.c, . $(ALL_DIRS)) \ + $(patsubst %,%/*.hc, . $(ALL_DIRS)) \ + $(patsubst %,%/*.S, . $(ALL_DIRS)) \ + $(patsubst %,%/*.prl, . $(ALL_DIRS)) \ + $(patsubst %,%/*.lprl, . $(ALL_DIRS)) \ + $(patsubst %,%/*.lit, . $(ALL_DIRS)) \ + $(patsubst %,%/*.verb, . $(ALL_DIRS)) \ + $(patsubst %,%/*.hsc, . $(ALL_DIRS)) \ + $(patsubst %,%/*.gc, . $(ALL_DIRS)) \ + )) $(EXTRA_SRCS) + +# ALL_SRCS is computed once and for all into PRE_SRCS at the top of +# target.mk. Otherwise, we end up re-computing ALL_SRCS every time it +# is expanded (it is used in several variables below, and these +# variables are used in several others, etc.), which can really slow +# down make. + +PRE_HS_SRCS = $(filter %.hs, $(PRE_SRCS)) +PRE_LHS_SRCS = $(filter %.lhs, $(PRE_SRCS)) + +PRE_HS_BOOT_SRCS = $(filter %.hs-boot, $(PRE_SRCS)) \ + $(filter %.lhs-boot, $(PRE_SRCS)) + +GC_SRCS = $(filter %.gc, $(PRE_SRCS)) +HSC_SRCS = $(filter %.hsc, $(PRE_SRCS)) +HAPPY_Y_SRCS = $(filter %.y, $(PRE_SRCS)) +HAPPY_LY_SRCS = $(filter %.ly, $(PRE_SRCS)) +HAPPY_SRCS = $(HAPPY_Y_SRCS) $(HAPPY_LY_SRCS) +ALEX_SRCS = $(filter %.x, $(PRE_SRCS)) + +DERIVED_GC_SRCS = $(patsubst %.gc, %.hs, $(GC_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.c, $(GC_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.h, $(GC_SRCS)) + +DERIVED_HSC_SRCS = $(patsubst %.hsc, %.hs, $(HSC_SRCS)) \ + $(patsubst %.hsc, %_hsc.c, $(HSC_SRCS)) \ + $(patsubst %.hsc, %_hsc.h, $(HSC_SRCS)) \ + $(patsubst %.hsc, %.hc, $(HSC_SRCS)) + +DERIVED_HAPPY_SRCS = $(patsubst %.y, %.hs, $(HAPPY_Y_SRCS)) \ + $(patsubst %.ly, %.hs, $(HAPPY_LY_SRCS)) + +DERIVED_ALEX_SRCS = $(patsubst %.x, %.hs, $(ALEX_SRCS)) + +DERIVED_HC_SRCS = $(patsubst %.hs, %.hc, $(PRE_HS_SRCS)) \ + $(patsubst %.lhs, %.hc, $(PRE_LHS_SRCS)) + +DERIVED_SRCS = $(DERIVED_GC_SRCS) \ + $(DERIVED_HSC_SRCS) \ + $(DERIVED_HAPPY_SRCS) \ + $(DERIVED_ALEX_SRCS) \ + $(DERIVED_HC_SRCS) # EXCLUDED_SRCS can be set in the Makefile, otherwise it defaults to empty. -EXCLUDED_HSC_SRCS = $(filter %.hsc, $(EXCLUDED_SRCS)) +EXCLUDED_GC_SRCS = $(filter %.gc, $(EXCLUDED_SRCS)) +EXCLUDED_HSC_SRCS = $(filter %.hsc, $(EXCLUDED_SRCS)) +EXCLUDED_HAPPY_Y_SRCS = $(filter %.y, $(EXCLUDED_SRCS)) +EXCLUDED_HAPPY_LY_SRCS = $(filter %.ly, $(EXCLUDED_SRCS)) +EXCLUDED_HAPPY_SRCS = $(EXCLUDED_HAPPY_Y_SRCS) $(EXCLUDED_HAPPY_LY_SRCS) +EXCLUDED_ALEX_SRCS = $(filter %.x, $(EXCLUDED_SRCS)) +EXCLUDED_HS_SRCS = $(filter %.hs, $(EXCLUDED_SRCS)) +EXCLUDED_LHS_SRCS = $(filter %.lhs, $(EXCLUDED_SRCS)) EXCLUDED_DERIVED_SRCS = $(patsubst %.hsc, %.hs, $(EXCLUDED_HSC_SRCS)) \ $(patsubst %.hsc, %_hsc.h, $(EXCLUDED_HSC_SRCS)) \ - $(patsubst %.hsc, %_hsc.c, $(EXCLUDED_HSC_SRCS)) + $(patsubst %.hsc, %_hsc.c, $(EXCLUDED_HSC_SRCS)) \ + $(patsubst %.hsc, %.hc, $(EXCLUDED_HSC_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.c, $(EXCLUDED_GC_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.h, $(EXCLUDED_GC_SRCS)) \ + $(patsubst %.y, %.hs, $(EXCLUDED_HAPPY_Y_SRCS)) \ + $(patsubst %.ly, %.hs, $(EXCLUDED_HAPPY_LY_SRCS)) \ + $(patsubst %.x, %.hs, $(EXCLUDED_ALEX_SRCS)) \ + $(patsubst %.hs, %.hc, $(EXCLUDED_HS_SRCS)) \ + $(patsubst %.lhs, %.hc, $(EXCLUDED_LHS_SRCS)) \ + $(patsubst %.hs, %_stub.c, $(EXCLUDED_HS_SRCS)) \ + $(patsubst %.lhs, %_stub.c, $(EXCLUDED_LHS_SRCS)) + +# Exclude _hsc.c files; they get built as part of the cbits library, +# not part of the main library CLOSED_EXCLUDED_SRCS = $(sort $(EXCLUDED_SRCS) $(EXCLUDED_DERIVED_SRCS)) SRCS = $(filter-out $(CLOSED_EXCLUDED_SRCS), \ $(sort $(PRE_SRCS) $(DERIVED_SRCS))) -HS_SRCS = $(filter %.lhs %.hs %.hc,$(sort $(SRCS) $(BOOT_SRCS))) +HS_SRCS = $(filter %.lhs %.hs, $(sort $(SRCS) $(BOOT_SRCS))) HS_OBJS = $(addsuffix .$(way_)o,$(basename $(HS_SRCS))) -HS_HCS = $(addsuffix .$(way_)hc,$(basename $(HS_SRCS))) -HS_SS = $(addsuffix .$(way_)s,$(basename $(HS_SRCS))) HS_IFACES = $(addsuffix .$(way_)hi,$(basename $(HS_SRCS))) -HSC_C_OBJS = $(patsubst %.hsc, %_hsc.o, $(filter %.hsc, $(SRCS))) +HI_BOOTS = $(patsubst %.hs-boot, %.$(way_)hi-boot, \ + $(patsubst %.lhs-boot, %.$(way_)hi-boot, $(PRE_HS_BOOT_SRCS))) + +O_BOOTS = $(patsubst %.hs-boot, %.$(way_)o-boot, \ + $(patsubst %.lhs-boot, %.$(way_)o-boot, $(PRE_HS_BOOT_SRCS))) + +GC_C_OBJS = $(addsuffix _stub_ffi.$(way_)o,$(basename $(filter %.gc,$(SRCS)))) +HSC_C_OBJS = $(addsuffix _hsc.$(way_)o,$(basename $(filter %.hsc,$(SRCS)))) -C_SRCS = $(filter %.c,$(SRCS)) +ifeq "$(BootingFromHc)" "NO" +# We don't want to build the _stub.c files ourselves, unless we're +# bootstrapping from .hc files. +EXCLUDED_C_SRCS = $(patsubst %.lhs, %_stub.c, $(HS_SRCS)) \ + $(patsubst %.hs, %_stub.c, $(HS_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.c, $(GC_SRCS)) \ + $(patsubst %.gc, %_stub_ffi.h, $(GC_SRCS)) +endif + +# These are droppings from hsc2hs - ignore them if we see them. +EXCLUDED_C_SRCS += $(patsubst %.hsc, %_hsc_make.c, $(HSC_SRCS)) + +C_SRCS = $(filter-out $(EXCLUDED_C_SRCS),$(filter %.c %.S,$(SRCS))) C_OBJS = $(addsuffix .$(way_)o,$(basename $(C_SRCS))) # SCRIPT_SRCS: list of raw script files (in literate form) # SCRIPT_OBJS: de-litted scripts -SCRIPT_SRCS=$(filter %.lprl,$(SRCS)) -SCRIPT_OBJS=$(addsuffix .prl,$(basename $(SCRIPT_SRCS))) +SCRIPT_SRCS = $(filter %.lprl,$(SRCS)) +SCRIPT_OBJS = $(addsuffix .prl,$(basename $(SCRIPT_SRCS))) + +OBJS = $(HS_OBJS) $(C_OBJS) $(GC_C_OBJS) -OBJS=$(HS_OBJS) $(C_OBJS) $(SCRIPT_OBJS) +# The default is for $(LIBOBJS) to be the same as $(OBJS) +LIBOBJS = $(OBJS) # # Note that as long as you use the standard variables for setting @@ -157,7 +193,7 @@ OBJS=$(HS_OBJS) $(C_OBJS) $(SCRIPT_OBJS) # # The default set of files for the dependency generators to work on # is just their source equivalents. -# +# ifneq "$(BootingFromHc)" "YES" MKDEPENDHS_SRCS=$(HS_SRCS) @@ -165,15 +201,15 @@ else MKDEPENDHS_SRCS= endif -MKDEPENDC_SRCS=$(C_SRCS) +MKDEPENDC_SRCS=$(C_SRCS) #------------------------------------------------------------------ # # make TAGS defaults # -# The default set of files for the dependency generators to work on +# The default set of files for the TAGS file generators to work on # is just their source equivalents. -# +# TAGS_HS_SRCS=$(HS_SRCS) TAGS_C_SRCS=$(C_SRCS) @@ -181,7 +217,7 @@ TAGS_C_SRCS=$(C_SRCS) # Clean file make-variables. # # The following three variables are used to control -# what gets removed when doing `make clean' +# what gets removed when doing `make clean' # # MOSTLYCLEAN_FILES object code etc., but not stuff # that is slow to recompile and/or stable @@ -192,70 +228,50 @@ TAGS_C_SRCS=$(C_SRCS) # that may require extra tools to create. # # -MOSTLY_CLEAN_FILES += $(HS_OBJS) $(C_OBJS) +# NOTE: $(SCRIPT_OBJS) is not in MOSTLY_CLEAN_FILES, because in some +# places in the tree it appears that we have source files in $(SCRIPT_OBJS). +# Specifically glafp-utils/mkdependC/mkdependC.prl and others in driver/ and +# possibly others elsewhere in the tree. ToDo: fix this properly. +MOSTLY_CLEAN_FILES += $(HS_OBJS) $(C_OBJS) $(HSC_C_OBJS) $(GC_C_OBJS) CLEAN_FILES += $(HS_PROG) $(C_PROG) $(SCRIPT_PROG) $(SCRIPT_LINK) \ - $(PROG) $(LIBRARY) $(HS_IFACES) $(HS_SS) a.out \ - $(DERIVED_SRCS) + $(PROG) $(LIBRARY) a.out \ + $(DERIVED_HSC_SRCS) \ + $(DERIVED_GC_SRCS) \ + $(patsubst %,%/*.$(way_)hi, . $(ALL_DIRS)) \ + $(HI_BOOTS) $(O_BOOTS) + +# we delete *all* the .hi files we can find, rather than just +# $(HS_IFACES), because stale interfaces left around by modules which +# don't exist any more can screw up the build. # Don't clean the .hc files if we're bootstrapping ifneq "$(BootingFromHc)" "YES" -CLEAN_FILES += $(HS_HCS) +CLEAN_FILES += $(DERIVED_HC_SRCS) endif -DIST_CLEAN_FILES += .depend -MAINTAINER_CLEAN_FILES += $(BOOT_SRCS) +DIST_CLEAN_FILES += .depend* *.hp *.prof + +MAINTAINER_CLEAN_FILES += $(BOOT_SRCS) $(DERIVED_HAPPY_SRCS) $(DERIVED_ALEX_SRCS) # # `Standard' set of files to clean out. # MOSTLY_CLEAN_FILES += \ - *.CKP *.ln *.BAK *.bak .*.bak *.o *core a.out errs ,* *.a .emacs_* \ + *.CKP *.ln *.BAK *.bak .*.bak *.o core a.out errs ,* *.a .emacs_* \ tags TAGS *.ind *.ilg *.idx *.idx-prev *.aux *.aux-prev *.dvi *.log \ - *.toc *.lot *.lof *.blg *.cb *_stub.c *_stub.h *.raw_s + *.toc *.lot *.lof *.blg *.cb *_stub.c *_stub.h *.raw_s *.a.list #------------------------------------------------------------------ -# -# Distribution setup -# -# Following variables are used for creating source and binary distributions: -# -# SRC_DIST_NAME && BIN_DIST_NAME -- the package names -# -# SRC_DIST_FILES = list of extra files to include from a build tree into a source -# distribution -# -# SRC_DIST_DIR = what the current directory in the source/build tree -# maps to in the source distrib. tree being created. -# -SRC_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) - -# -# Binary distributions proceeds as follows: -# -# Fromthe top of a build tree, you do `make binary-dist'. The -# canned rule for this (in target.mk) will then do a binary -# install to a temporary directory before packaging it all up. -# The following variables guide the binary-dist: -# -# BIN_DIST_TMPDIR= the absolute path to where the temporary directory -# structure of a binary distribution should be created. -# [Default: toplevel from which you issue `make binary-dist'] -# BIN_DIST_NAME= what to call the thing. -# -# BIN_DIST_DIRS= at the toplevel, list of directories to descend into when -# building the distribution tree. -# -# An extra directory variable that is set during bin-dists is $(bindist_top), giving -# the abs. path to the root of the binary installation tree. (useful when punting -# stuff like README and ANNOUNCE into a distrib, for instance) -# -# The layout of a binary distribution is described in the -# installation documentation. -# - # Directory in which DLLs are dumped so as not to get picked up by running # programs (e.g. ghc or hsc) that run in the build tree DLL_PEN = $(FPTOOLS_TOP)/dll +#------------------------------------------------------------------ +# +# Stylesheet for HTML generated from DocBook XML +# + +FPTOOLS_CSS = fptools.css +FPTOOLS_CSS_ABS = $(FPTOOLS_TOP)/mk/$(FPTOOLS_CSS)