+# -*-makefile-*-
+# @configure_input@
+#
+################################################################################
+#
+# config.mk.in
+#
+# This file supplies defaults for many tweakable build configuration
+# options. Some of the defaults are filled in by the autoconf-generated
+# configure script.
+#
+# DO NOT EDIT THIS FILE!
+#
+# - config.mk is auto-generated from config.mk.in by configure.
+# This may be triggered automatically by the build system (say
+# if config.mk.in has changed more recently than config.mk),
+# so if you edit config.mk your changes will be spammed.
+#
+# - Settings in this file may be overriden by giving replacement
+# definitions in build.mk. See build.mk.sample for a good
+# starting point for a build.mk file.
+#
+# If you don't have a build.mk file then you get defaults for everything.
+# The defaults should provide a reasonable vanilla build.
+#
+# This is one of only two files that configure generates (the other is config.h)
+#
+
+ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
+ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
+$(error GNU make version 3.79.1 or later is required.)
+endif
+endif
+
+################################################################################
+#
+# GHC Version
+#
+
+# ProjectVersion is treated as a *string*
+# ProjectVersionInt is treated as an *integer* (for cpp defines)
+
+# Versioning scheme: A.B.C
+# A: major version, decimal, any number of digits
+# B: minor version, decimal, any number of digits
+# C: patchlevel, one digit, omitted if zero.
+#
+# ProjectVersionInt does *not* contain the patchlevel (rationale: this
+# figure is used for conditional compilations, and library interfaces
+# etc. are not supposed to change between patchlevels).
+#
+# The ProjectVersionInt is included in interface files, and GHC
+# checks that it's reading interface generated by the same ProjectVersion
+# as itself. It does this even though interface file syntax may not
+# change between versions. Rationale: calling conventions or other
+# random .o-file stuff might change even if the .hi syntax doesn't
+
+ProjectName = @ProjectName@
+ProjectTags =
+ProjectVersion = @ProjectVersion@$(ProjectTags)
+ProjectVersionInt = @ProjectVersionInt@
+ProjectPatchLevel = @ProjectPatchLevel@
+
+################################################################################
+#
+# Platform variables
+#
+################################################################################
+
+# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
+# specifier. E.g. sparc-sun-solaris2
+#
+# Build platform: the platform on which we are doing this build
+# Host platform: the platform on which these binaries will run
+# Target platform: the platform for which this compiler will generate code
+#
+# We don't support build & host being different, because the build
+# process creates binaries that are run during the build, and also
+# installed.
+#
+# If host & target are different, then we are building a compiler
+# which will generate intermediate .hc files to port to the target
+# architecture for bootstrapping. The libraries and stage 2 compiler
+# will be built as HC files for the target system, and likely won't
+# build on this host platform.
+#
+# An important invariant is that for any piece of source code, the
+# platform on which the code is going to run is the HOST platform,
+# and the platform on which we are building is the BUILD platform.
+# Additionally for the compiler, the platform this compiler will
+# generate code for is the TARGET. TARGET is not meaningful outside
+# the compiler sources.
+#
+# Guidelines for when to use HOST vs. TARGET:
+#
+# - In the build system (Makefile, foo.mk), normally we should test
+# $(HOSTPLATFORM). There are some cases (eg. installation), where
+# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
+# doesn't matter which is used.
+#
+# - In the compiler itself, we should test HOST or TARGET depending
+# on whether the conditional relates to the code being generated, or
+# the platform on which the compiler is running. See the section
+# on "Coding Style" in the commentary for more details.
+#
+# - In all other code, we should be testing HOST only.
+#
+# NOTE: cross-compiling is not well supported by the build system.
+# You have to do a lot of work by hand to cross compile: see the
+# section on "Porting GHC" in the Building Guide.
+
+HOSTPLATFORM = @HostPlatform@
+TARGETPLATFORM = @TargetPlatform@
+BUILDPLATFORM = @BuildPlatform@
+
+# Hack alert:
+# in one or two places, we need to get at the OS version (major and
+# perhaps even minor), HostOS_Full is the OS name reported by
+# AC_CANONICAL_SYSTEM.
+#
+HostPlatform_CPP = @HostPlatform_CPP@
+HostArch_CPP = @HostArch_CPP@
+HostOS_CPP = @HostOS_CPP@
+HostOS_Full = @HostOS_Full@
+HostVendor_CPP = @HostVendor_CPP@
+
+TargetPlatform_CPP = @TargetPlatform_CPP@
+TargetArch_CPP = @TargetArch_CPP@
+TargetOS_CPP = @TargetOS_CPP@
+TargetVendor_CPP = @TargetVendor_CPP@
+
+BuildPlatform_CPP = @BuildPlatform_CPP@
+BuildArch_CPP = @BuildArch_CPP@
+BuildOS_CPP = @BuildOS_CPP@
+BuildVendor_CPP = @BuildVendor_CPP@
+
+@HostPlatform_CPP@_HOST = 1
+@TargetPlatform_CPP@_TARGET = 1
+@BuildPlatform_CPP@_BUILD = 1
+
+@HostArch_CPP@_HOST_ARCH = 1
+@TargetArch_CPP@_TARGET_ARCH = 1
+@BuildArch_CPP@_BUILD_ARCH = 1
+
+@HostOS_CPP@_HOST_OS = 1
+@TargetOS_CPP@_TARGET_OS = 1
+@BuildOS_CPP@_BUILD_OS = 1
+
+@HostVendor_CPP@_HOST_VENDOR = 1
+@TargetVendor_CPP@_TARGET_VENDOR = 1
+@BuildVendor_CPP@_BUILD_VENDOR = 1
+
+################################################################################
+#
+# Global configuration options
+#
+################################################################################
+
+# Leading underscores on symbol names in object files
+# Valid options: YES/NO
+#
+LeadingUnderscore=@LeadingUnderscore@
+
+# Pin a suffix on executables? If so, what (Windows only).
+exeext=@exeext@
+soext=@soext@
+
+# Windows=YES if on a Windows platform
+ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
+Windows=YES
+else
+Windows=NO
+endif
+
+# BootingFromHc - build GHC and the libraries from .hc files?
+BootingFromHc = @BootingFromHc@
+
+# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
+# rather than registerised code, i.e., disable the mangler?
+BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
+
+#
+# Which ways should DocBook XML documents be built?
+# options are: dvi ps pdf html chm HxS
+#
+XMLDocWays=
+
+# Should we build latex docs?
+LATEX_DOCS = NO
+
+# Mac OS X deployment target (to cross-compile for older OS versions)
+#
+MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
+MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
+
+ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
+MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -isysroot $(MACOSX_DEPLOYMENT_SDK) \
+ --no-builtin-fprintf
+MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
+ -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
+# We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
+# overwritten in build.mk and (b) we must not use the deployment options in
+# stage 1 or we get a linker error if the bootstrap compiler is for a more
+# recent OS version.
+#
+# We need --no-builtin-fprintf, as the use of the builtin function optimisation
+# for fprintf together with #include "PosixSource" in the RTS leads to the
+# use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2).
+endif
+
+################################################################################
+#
+# Variables that control how the compiler itself is built
+#
+################################################################################
+
+# The compiler used to build GHC is $(GHC). To change the actual compiler
+# used, re-configure with --with-ghc=<path-to-ghc>.
+
+# Extra ways in which to build the compiler (for example, you might want to
+# build a profiled compiler so you can see where it spends its time)
+GhcCompilerWays=
+
+# Extra option flags to pass to the compiler that compiles the compiler
+# (Ones that are essential are wired into compiler/Makefile)
+# Typical options to use here:
+#
+# -DDEBUG include debugging code and assertions (will make the
+# compiler slower and produce debugging output, but useful
+# for development)
+#
+# -dcore-lint check the types after every pass of the compiler;
+# a pretty strong internal check of the compiler being
+# used to compile GHC. Useful when bootstrapping.
+GhcHcOpts=-Rghc-timing
+
+# Extra options added to specific stages of the compiler bootstrap.
+# These are placed later on the command line, and may therefore
+# override options from $(GhcHcOpts).
+GhcStage1HcOpts=
+GhcStage2HcOpts=-O2
+GhcStage3HcOpts=-O2
+
+GhcProfiled=NO
+GhcDebugged=NO
+GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
+
+# Build shared and/or static libs?
+BuildSharedLibs=@BuildSharedLibs@
+# ToDo later:
+# BuildStaticLibs=@BuildStaticLibs@
+
+# Build a compiler that will build *unregisterised* libraries and
+# binaries by default. Unregisterised code is supposed to compile and
+# run without any support for architecture-specific assembly mangling,
+# register assignment or tail-calls, and is therefore a good way to get
+# started when porting GHC to new architectures.
+#
+# If this is set to NO, you can still use the unregisterised way
+# (way 'u') to get unregisterised code, but the default way will be
+# registerised.
+#
+# NOTE: the stage1 compiler will be a registerised binary (assuming
+# the compiler you build with is generating registerised binaries), but
+# the stage2 compiler will be an unregisterised binary.
+#
+ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
+GhcUnregisterised=YES
+else
+GhcUnregisterised=NO
+endif
+
+# Build a compiler with a native code generator backend
+# (as well as a C backend)
+#
+# Target platforms supported:
+# i386, powerpc
+# AIX is not supported
+ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)))
+OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithNativeCodeGen=$(strip\
+ $(if $(filter YESYESNO,\
+ $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
+
+HaveLibDL = @HaveLibDL@
+
+# ArchSupportsSMP should be set iff there is support for that arch in
+# includes/SMP.h
+ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
+
+# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
+GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
+
+# Whether to include GHCi in the compiler. Depends on whether the RTS linker
+# has support for this OS/ARCH combination.
+
+OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
+ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
+
+ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
+GhcWithInterpreter=YES
+else
+GhcWithInterpreter=NO
+endif
+
+# GhcEnableTablesNextToCode tells us whether the target architecture
+# supports placing info tables directly before the entry code
+# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
+# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
+# code or not, which may be decided by options to the compiler later.
+ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
+GhcEnableTablesNextToCode=NO
+else
+GhcEnableTablesNextToCode=YES
+endif
+
+# On Windows we normally want to make a relocatable bindist, to we
+# ignore flags like libdir
+ifeq "$(Windows)" "YES"
+RelocatableBuild = YES
+else
+RelocatableBuild = NO
+endif
+
+# When building bindists we set this to yes so that the binaries are as
+# portable as possible.
+BeConservative = NO
+
+#
+# Building various ways?
+# (right now, empty if not).
+BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
+BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
+
+# Interface file version (hi-boot files only)
+#
+# A GHC built with HscIfaceFileVersion=n will look for
+# M.hi-boot-n, and only then for
+# M.hi-boot.
+# (It'll be happy with the latter if the former doesn't exist.)
+#
+#
+# This variable is used ONLY for hi-boot files. Its only purpose is
+# to allow you to have a single directory with multiple .hi-boot files
+# for the same module, each corresponding to a different version of
+# GHC.
+#
+# HscIfaceFileVersion is propagated to hsc via
+# compiler/main/Config.hs, which is automatically generated by
+# compiler/Makefile.
+
+HscIfaceFileVersion=6
+
+#------------------------------------------------------------------------------
+# Options for Libraries
+
+# Which directory (in libraries/) contains the integer library?
+INTEGER_LIBRARY=integer-gmp
+
+# What extra ways to build the libraries in
+# In addition to the normal sequential way, the default is to also build
+# profiled prelude libraries.
+# When booting from .hc files, turn this off.
+ifeq "$(BootingFromHc)" "YES"
+GhcLibWays=
+else
+GhcLibWays=p
+endif
+
+ifeq "$(BuildSharedLibs)" "YES"
+GhcLibWays += dyn
+endif
+
+# In addition, the RTS is built in some further variations. Ways that
+# make sense here:
+#
+# thr : threaded
+# thr_p : threaded profiled
+# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
+# debug_p : debugging profiled
+# thr_debug : debugging threaded
+# thr_debug_p : debugging threaded profiled
+# t : ticky-ticky profiling
+# debug_t : debugging ticky-ticky profiling
+# l : event logging
+# thr_l : threaded and event logging
+# thr_debug_l : threaded and debugging and event logging
+#
+GhcRTSWays=l
+
+# Usually want the debug version
+ifeq "$(BootingFromHc)" "NO"
+GhcRTSWays += debug
+endif
+
+ifeq "$(BuildSharedLibs)" "YES"
+GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn
+endif
+
+# Want the threaded versions unless we're unregisterised
+# Defer the check until later by using $(if..), because GhcUnregisterised might
+# be set in build.mk, which hasn't been read yet.
+GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_debug thr_l,)
+GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),$(if $(findstring NO, $(GhcUnregisterised)),thr_p,),)
+
+# We can only build GHCi threaded if we have a threaded RTS:
+GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
+
+# Option flags to pass to GHC when it's compiling modules in
+# fptools/libraries. Typically these are things like -O or
+# -dcore-lint or -H32m. The ones that are *essential* are wired into
+# the build system.
+#
+# -O(2) is pretty desirable, otherwise no inlining of prelude
+# things (incl "+") happens when compiling with this compiler
+#
+# -XGenerics switches on generation of support code for
+# derivable type classes. This is now off by default,
+# but we switch it on for the libraries so that we generate
+# the code in case someone importing wants it
+
+GhcLibHcOpts=-O2 -Rghc-timing -XGenerics
+
+# Win32 only: Enable the RTS and libraries to be built as DLLs
+DLLized=@EnableWin32DLLs@
+
+# Strip local symbols from libraries? This can make the libraries smaller,
+# but makes debugging somewhat more difficult. Doesn't work with all ld's.
+#
+StripLibraries=NO
+
+# These are the URL patterns that Haddock uses to generate the "Source
+# File" links on each page.
+PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
+
+# ----------------------------------------------------------------------------
+# Object-file splitting
+#
+# Set SplitObjs=YES or NO in your build.mk
+#
+# Don't use -split-objs in in GhcLibHcOpts, because the build
+# system needs to do other special magic if you are
+# doing object-file splitting
+
+ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
+
+# lazy test, so that $(GhcUnregisterised) can be set in build.mk
+SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\
+ $(if $(filter NO,$(BootingFromHc)),\
+ $(if $(filter NO,$(GhcUnregisterised)),\
+ YES,\
+ NO),\
+ NO),\
+ NO))
+
+# By default, enable SplitObjs for the libraries if this build supports it
+SplitObjs=$(SupportsSplitObjs)
+
+# Math library
+LIBM=@LIBM@
+
+# .NET interop support?
+#
+DotnetSupport=NO
+
+# Build unix package?
+#
+GhcLibsWithUnix=@GhcLibsWithUnix@
+
+# ----------------------------------------------------------------------------
+# Options for GHC's RTS
+
+# For an optimised RTS (you probably don't want to change these; we build
+# a debugging RTS by default now. Use -debug to get it).
+GhcRtsHcOpts=-optc-O2
+GhcRtsCcOpts=-fomit-frame-pointer
+
+# Include the front panel code? Needs GTK+.
+GhcRtsWithFrontPanel = NO
+
+# Include support for CPU performance counters via the PAPI library in the RTS?
+# (PAPI: http://icl.cs.utk.edu/papi/)
+GhcRtsWithPapi = NO
+PapiLibDir=
+PapiIncludeDir=
+
+################################################################################
+#
+# nofib
+#
+# nofib specific options
+#
+################################################################################
+
+WithNofibHc = $(GHC_INPLACE)
+
+# NoFibSubDirs controls which set of tests should be run
+# You can run one or more of
+# imaginary
+# spectral
+# real
+# parallel
+# PRIVATE
+# PENDING
+# UNUSED
+NoFibSubDirs = imaginary spectral real
+
+# The different ways to build nofib. Default is just to mirror
+# what is done for the ghc prelude libraries.
+#
+NoFibWays = $(GhcLibWays)
+
+# Haskell compiler options for nofib
+NoFibHcOpts = -O
+
+# Number of times to run each program
+NoFibRuns = 5
+
+################################################################################
+#
+# Paths (see paths.mk)
+#
+################################################################################
+
+# Directory used by GHC (and possibly other tools) for storing
+# temporary files. If your TMPDIR isn't big enough, either override
+# this in build.mk or set your environment variable "TMPDIR" to point
+# to somewhere with more space. (TMPDIR=. is a good choice).
+
+# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
+# override an environment variable with the value of the make variable
+# of the same name (if it exists) when executing sub-processes, so
+# setting the TMPDIR env var would have no effect in the build tree.
+
+DEFAULT_TMPDIR = /tmp
+ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
+DEFAULT_TMPDIR = /C/TEMP
+endif
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+DEFAULT_TMPDIR = /C/TEMP
+endif
+
+# FPTOOLS_TOP_ABS: the top of the fptools hierarchy, absolute path.
+# On Windows this is a c:/foo/bar style path.
+FPTOOLS_TOP_ABS = @hardtop@
+
+BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
+BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
+
+BIN_DIST_NAME=ghc-$(ProjectVersion)
+BIN_DIST_TAR=$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
+BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
+BIN_DIST_PREP_DIR=$(FPTOOLS_TOP_ABS)/bindist-prep
+BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
+BIN_DIST_LIST=$(FPTOOLS_TOP_ABS)/bindist-list
+
+# Definition of installation directories, we don't use half of these, but since
+# the configure script has them on offer while passing through, we might as well
+# set them. Note that we have to be careful, because the GNU coding standards
+# have changed a bit over the course of time, and autoconf development reflects
+# this.
+#
+# A little bit of history regarding autoconf and GNU coding standards, use this
+# as a cheat-sheet for the stuff below:
+#
+# variable | default < 2.60 | default >= 2.60
+# ------------+--------------------+--------------------------------------
+# exec_prefix | ${prefix} | ${prefix}
+# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
+# datarootdir | NONE! | ${prefix}/share
+# datadir | ${prefix}/share | ${datarootdir}
+# infodir | ${prefix}/info | ${datarootdir}/info
+# mandir | ${prefix}/man | ${datarootdir}/man
+# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
+# htmldir | NONE! | ${docdir}
+# dvidir | NONE! | ${docdir}
+# pdfdir | NONE! | ${docdir}
+# psdir | NONE! | ${docdir}
+#
+# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
+# string "${docdir}", not the value of docdir! This is crucial for the GNU
+# coding standards.
+
+# This gets used in the default docdir when autoconf >= 2.60 is used
+PACKAGE_TARNAME := @PACKAGE_TARNAME@
+
+prefix := @prefix@
+
+# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
+# However, in order to support older autoconf's we don't use it.
+# datarootdir is set lower down instead.
+# But, as datadir is defined in terms of datarootdir, we also need to
+# set it to the value (if any) that configure gives it here.
+datarootdir := @datarootdir@
+
+exec_prefix := @exec_prefix@
+bindir := @bindir@
+datadir0 := @datadir@
+libdir0 := @libdir@
+includedir := @includedir@
+mandir := @mandir@
+dynlibdir := @libdir@
+
+ifeq "$(RelocatableBuild)" "YES"
+
+# Hack: our directory layouts tend to be different on Windows, so
+# hack around configure's bogus assumptions here.
+datarootdir := $(prefix)
+datadir := $(prefix)
+libdir := $(prefix)
+
+docdir := $(prefix)/doc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
+
+else
+
+# Unix: override libdir and datadir to put ghc-specific stuff in
+# a subdirectory with the version number included.
+#
+# datadir is set to libdir here as GHC needs package.conf and unlit
+# to be in the same place (and things like ghc-pkg need to agree on
+# where package.conf is, so we just set it globally).
+#
+datarootdir := $(datadir0)
+libdir := $(libdir0)/ghc-$(ProjectVersion)
+datadir := $(libdir)
+
+# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
+# However, in order to support older autoconf's we don't use them.
+
+#docdir := @docdir@
+#htmldir := @htmldir@
+#dvidir := @dvidir@
+#pdfdir := @pdfdir@
+#psdir := @psdir@
+
+docdir := $(datarootdir)/doc/ghc
+htmldir := $(docdir)
+dvidir := $(docdir)
+pdfdir := $(docdir)
+psdir := $(docdir)
+
+endif # Windows
+
+headerdir := $(libdir)/include
+
+# Default place for putting interface files is $(libdir)
+# (overriden for packages in package.mk)
+ifacedir = $(libdir)
+
+# NOTE: by intention, libexecdir and libdir point to
+# the same place.
+# => Only way to override this is to set libexecdir= on the command line.
+# (NOTE: configure script setting is ignored).
+libexecdir = $(libdir)
+
+GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/install-inplace/bin/ghc-pkg
+
+#-----------------------------------------------------------------------------
+# install configuration
+
+#
+# Set this to have files installed with a specific owner
+#
+INSTALL_OWNER =
+
+#
+# Set this to have files installed with a specific group
+#
+INSTALL_GROUP =
+
+#
+# Invocations of `install' for the four different classes
+# of targets:
+#
+INSTALL_PROGRAM = $(INSTALL) -m 755
+INSTALL_SCRIPT = $(INSTALL) -m 755
+INSTALL_SHLIB = $(INSTALL) -m 755
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_HEADER = $(INSTALL) -m 644
+INSTALL_MAN = $(INSTALL) -m 644
+INSTALL_DIR = $(MKDIRHIER)
+
+#
+# runhaskell and hsc2hs are special, in that other compilers besides
+# GHC might provide them. Systems with a package manager often come
+# with tools to manage this kind of clash, e.g. RPM's
+# update-alternatives. When building a distribution for such a system,
+# we recommend setting both of the following to 'YES'.
+#
+# NO_INSTALL_RUNHASKELL = YES
+# NO_INSTALL_HSC2HS = YES
+#
+# NB. we use negative tests here because for binary-distributions we cannot
+# test build-time variables at install-time, so they must default to on.
+
+# -----------------------------------------------------------------------------
+# Utilities programs: flags
+
+# If you want to give any standard flags to pretty much any utility
+# (see utils.mk for a complete list), by adding a line here
+#
+# SRC_P_OPTS += ...
+#
+# where P is the utility. For example, to add -O to all Haskell
+# compilations,
+#
+# SRC_HC_OPTS += -O
+
+SRC_HC_OPTS += -H32m -O
+
+# These flags make flex 8-bit
+SRC_FLEX_OPTS += -8
+
+# lint gets all CPP's flags too
+SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
+WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
+
+# Default fptools options for dllwrap.
+SRC_BLD_DLL_OPTS += --target=i386-mingw32
+
+# Flags for CPP when running GreenCard on .pgc files
+GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
+
+
+################################################################################
+#
+# Layout of the source tree
+#
+################################################################################
+
+# Here we provide defines for the various directories in the source tree,
+# so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
+# indicates a directory relative to the top of the source tree, whereas
+# $(GHC_FOO_DIR) is a directory relative to the current directory.
+# $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
+
+GHC_UTILS_DIR_REL = utils
+GHC_INCLUDE_DIR_REL = includes
+GHC_COMPILER_DIR_REL = ghc
+GHC_RTS_DIR_REL = rts
+GHC_UTILS_DIR_REL = utils
+GHC_DRIVER_DIR_REL = driver
+GHC_COMPAT_DIR_REL = compat
+
+GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
+GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
+GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
+GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
+GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
+GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
+GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
+GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
+GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
+GHC_GHCTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/ghctags
+GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
+GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
+GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
+GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
+GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
+
+GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
+GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
+GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
+
+INPLACE_DATA_DIR = $(FPTOOLS_TOP_ABS)/inplace-datadir
+
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
+GHC_GHCTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_GHCTAGS_DIR_REL)
+GHC_HSC2HS_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
+
+GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
+GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
+GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
+
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
+GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
+GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
+GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
+GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
+GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
+
+GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
+GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
+GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
+GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
+GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
+GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
+GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
+GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
+GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
+GHC_GHCTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GHCTAGS_DIR_REL)
+GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
+GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
+GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
+GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
+GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
+GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
+
+GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
+GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
+GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
+
+# -----------------------------------------------------------------------------
+# Names of programs in the GHC tree
+#
+# xxx_PGM the name of an executable, without the path
+# xxx the executable relative to the current dir
+
+GHC_UNLIT_PGM = unlit$(exeext)
+GHC_HP2PS_PGM = hp2ps
+GHC_HSTAGS_PGM = hasktags
+GHC_GHCTAGS_INPLACE_PGM = ghctags-inplace
+GHC_HSC2HS_INPLACE_PGM = hsc2hs
+GHC_TOUCHY_PGM = touchy$(exeext)
+GHC_MANGLER_PGM = ghc-asm
+GHC_SPLIT_PGM = ghc-split
+GHC_SYSMAN_PGM = SysMan
+GHC_GENPRIMOP_PGM = genprimopcode
+GHC_GENAPPLY_PGM = genapply
+GHC_MKDEPENDC_PGM = mkdependC
+GHC_LTX_PGM = ltx
+GHC_MKDIRHIER_PGM = mkdirhier
+GHC_LNDIR_PGM = lndir
+GHC_RUNTEST_PGM = runstdtest
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+GHC_CP = "xcopy /y"
+GHC_PERL = perl
+else
+GHC_CP = $(CP)
+GHC_PERL = $(PERL)
+endif
+
+UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
+HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
+HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
+GHCTAGS_INPLACE = $(GHC_GHCTAGS_DIR)/$(GHC_GHCTAGS_INPLACE_PGM)
+HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/install-inplace/bin/$(GHC_HSC2HS_INPLACE_PGM)
+MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
+SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
+SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
+GHC_PKG_INPLACE = $(GHC_PKG_PROG)
+GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
+GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
+MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
+LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
+MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
+LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
+RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
+
+GENERATED_FILE = chmod a-w
+EXECUTABLE_FILE = chmod +x
+
+#-----------------------------------------------------------------------------
+# Haskell compilers and mkdependHS
+
+# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
+# compilers, if available.
+#
+# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
+# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
+#
+# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
+# (because the version numbers have to be calculated).
+
+GHC = @WithGhc@
+GhcDir = $(dir $(GHC))
+
+# Set to YES if $(GHC) has the editline package installed
+GhcHasEditline = @GhcHasEditline@
+
+HBC = @HBC@
+NHC = @NHC@
+
+# Sometimes we want to invoke ghc from the build tree in different
+# places (eg. it's handy to have a nofib & a ghc build in the same
+# tree). We can refer to "this ghc" as $(GHC_INPLACE):
+
+GHC_INPLACE = $(GHC_STAGE1)
+GHC_STAGE1 = $(GHC_COMPILER_DIR_ABS)/stage1-inplace/ghc
+GHC_STAGE2 = $(GHC_COMPILER_DIR_ABS)/stage2-inplace/ghc
+GHC_STAGE3 = $(GHC_COMPILER_DIR_ABS)/stage3-inplace/ghc
+# XXX All those used to have -no-user-package-conf, but then we can't
+# pass them to Cabal
+
+BOOTSTRAPPING_CONF = $(FPTOOLS_TOP_ABS)/libraries/bootstrapping.conf
+
+# NOTE: add -no-user-package-conf for stage 1-3 above, so that
+# we avoid picking up any packages the user might happen to have
+# installed for this GHC version. They are bound to be incompatible
+# with the packages we built in the tree.
+
+ifeq "$(stage)" "2"
+ UseStage1 = YES
+endif
+ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
+
+# We are using the stage1 compiler to compile Haskell code, set up
+# some variables appropriately:
+HC =$(GHC_STAGE1)
+MKDEPENDHS =$(GHC_STAGE1)
+USE_NEW_MKDEPEND_FLAGS = YES
+GhcVersion = @ProjectVersion@
+GhcPatchLevel = @ProjectPatchLevel@
+# oops, these are wrong:
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+
+ghc_ge_607 = YES
+ghc_ge_609 = YES
+
+else # not UseStage1 or BootingFromHc
+
+# Some useful GHC version predicates:
+ghc_ge_607 = @ghc_ge_607@
+ghc_ge_609 = @ghc_ge_609@
+
+HC = @WithHc@
+MKDEPENDHS = $(GHC)
+USE_NEW_MKDEPEND_FLAGS = $(ghc_ge_609)
+GhcVersion = @GhcVersion@
+GhcPatchLevel = @GhcPatchLevel@
+GhcMajVersion = @GhcMajVersion@
+GhcMinVersion = @GhcMinVersion@
+
+# We build a few packages using the installed GHC as part of the
+# bootstrapping process. These are installed into a local
+# package.conf file, $(BOOTSTRAPPING_CONF). When we invoke the
+# installed GHC we need to pass it -package-conf $(BOOTSTRAPPING_CONF).
+# So the following variables expand to -package-conf $(BOOTSTRAPPING_CONF)
+# when $(HC) does *not* point to one of the GHC binaries built in
+# the local tree.
+#
+BOOTSTRAPPING_PACKAGE_CONF_HC_OPTS =$(if $(findstring inplace, $(HC)),,-package-conf $(BOOTSTRAPPING_CONF))
+BOOTSTRAPPING_PACKAGE_CONF_MKDEPENDHS_OPTS =$(if $(findstring inplace, $(MKDEPENDHS)),,-package-conf $(BOOTSTRAPPING_CONF))
+endif
+
+# Canonicalised ghc version number, used for easy (integer) version
+# comparisons. We must expand $(GhcMinVersion) to two digits by
+# adding a leading zero if necessary:
+ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
+GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
+else
+GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
+endif
+
+#-----------------------------------------------------------------------------
+# C compiler
+#
+# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
+# the flag --with-gcc=<blah> instead. The reason is that the configure script
+# needs to know which gcc you're using in order to perform its tests.
+
+HaveGcc = @HaveGcc@
+UseGcc = YES
+WhatGccIsCalled = @WhatGccIsCalled@
+GccVersion = @GccVersion@
+ifeq "$(strip $(HaveGcc))" "YES"
+ifneq "$(strip $(UseGcc))" "YES"
+ CC = cc
+else
+ CC = $(WhatGccIsCalled)
+ GccDir = $(dir $(WhatGccIsCalled))
+endif
+endif
+
+# default C compiler flags
+SRC_CC_OPTS = @SRC_CC_OPTS@
+
+ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
+SRC_CC_OPTS += -G0
+endif
+
+SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
+SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
+
+#-----------------------------------------------------------------------------
+# GMP Library (version 2.0.x or above)
+#
+HaveLibGmp = @HaveLibGmp@
+LibGmp = @LibGmp@
+
+GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
+GMP_LIB_DIRS=@GMP_LIB_DIRS@
+
+#-----------------------------------------------------------------------------
+# GMP framework (Mac OS X)
+#
+HaveFrameworkGMP = @HaveFrameworkGMP@
+
+#-----------------------------------------------------------------------------
+# Mingwex Library
+#
+HaveLibMingwEx = @HaveLibMingwEx@
+
+#-----------------------------------------------------------------------------
+# Flex (currently unused, could be moved to glafp-utils)
+
+# FLEX = @LEX@
+# Don't bother with -lfl, we define our own yywrap()s anyway.
+# FLEX_LIB =
+#WAS:FLEX_LIB = @LEXLIB@
+
+#-----------------------------------------------------------------------------
+# Other standard (ha!) Unix utilities
+
+AR = @ArCmd@
+ArSupportsInput = @ArSupportsInput@
+# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
+BASH = /usr/local/bin/bash
+
+CONTEXT_DIFF = @ContextDiffCmd@
+CP = cp
+CPP = @CPP@ @CPPFLAGS@
+CTAGS = $(ETAGS)
+#
+# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
+# behave plausibly on Haskell sources.
+#
+RAWCPP_FLAGS = -undef -traditional
+FIND = @FindCmd@
+SORT = @SortCmd@
+INSTALL = @INSTALL@
+#
+# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
+# install-sh script (if chosen). This not terribly useful to us, so we convert
+# it into an abs. path.
+#
+INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
+LATEX = latex
+HEVEA = hevea
+HACHA = hacha
+LN_S = @LN_S@
+MANMACROS = -man
+MSMACROS = -ms
+MV = mv
+NROFF = nroff
+PERL = @PerlCmd@
+PYTHON = @PythonCmd@
+PIC = pic
+PREPROCESSCMD = $(CC) -E
+RANLIB = @RANLIB@
+RM = rm -f
+SED = @SedCmd@
+SHELL = /bin/sh
+
+LD = @LdCmd@
+
+# Some ld's support the -x flag and some don't, so the configure
+# script detects which we have and sets LdXFlag to "-x" or ""
+# respectively.
+LD_X = @LdXFlag@
+
+# GNU ld supports input via a linker script, which is useful to avoid
+# overflowing command-line length limits.
+LdIsGNULd = @LdIsGNULd@
+
+#
+# In emergency situations, REAL_SHELL is used to perform shell commands
+# from within the ghc driver script, by scribbling the command line to
+# a temp file and then having $(REAL_SHELL) execute it.
+#
+# The reason for having to do this is that overly long command lines
+# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
+# 2.5.1), which is why this backdoor is provided. The situation of overly
+# long command lines is either encountered while doing `make boot' in compiler/,
+# or when linking the compiler binary (`hsc').
+#
+# We do not use SHELL to execute long commands, as `make' will more than likely
+# override whatever setting you have in your environment while executing.
+
+# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
+# as it is SHELL that will show up the bogosity in the first place, but setting
+# it to anything else isn't really portable.
+#
+# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
+# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
+# command shell.
+#
+REAL_SHELL=$(SHELL)
+SIZE = size
+STRIP = strip
+TAR = @TarCmd@
+ZIP = zip
+
+HSCOLOUR = @HSCOLOUR@
+
+#
+# This is special to literate/, ToDo: add literate-specific
+# configure setup to literate/.
+#
+TBL = tbl
+TEX = tex
+TGRIND = tgrind
+TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
+TIB = tib
+
+TIME = @TimeCmd@
+TROFF = troff
+UNAME = uname
+
+# GTK+
+GTK_CONFIG = @GTK_CONFIG@
+
+# Set this if you want to use Inno Setup to build a Windows installer
+# when you make a bindist
+ISCC =
+
+#-----------------------------------------------------------------------------
+# DocBook XML stuff
+
+XSLTPROC = @XsltprocCmd@
+XMLLINT = @XmllintCmd@
+FOP = @FopCmd@
+XMLTEX = @XmltexCmd@
+PDFXMLTEX = @PdfxmltexCmd@
+DVIPS = @DvipsCmd@
+
+DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
+
+XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
+ --stringparam section.autolabel 1 \
+ --stringparam section.label.includes.component.label 1
+
+#-----------------------------------------------------------------------------
+# FPtools support software
+
+BLD_DLL = dllwrap
+
+#
+# .NET support software
+#
+ILX2IL = ilx2il
+ILASM = ilasm
+
+#
+# ghc-pkg
+#
+GHC_PKG = @GhcPkgCmd@
+
+#
+# GreenCard
+#
+GREENCARD = @GreenCardCmd@
+GREENCARD_VERSION = @GreenCardVersion@
+
+#
+# Happy
+#
+HAPPY = @HappyCmd@
+HAPPY_VERSION = @HappyVersion@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_HAPPY_OPTS = -agc --strict
+
+# Temp. to work around performance problems in the HEAD around 8/12/2003,
+# A Happy compiled with this compiler needs more stack.
+SRC_HAPPY_OPTS = +RTS -K2m -RTS
+
+#
+# Alex
+#
+ALEX = @AlexCmd@
+ALEX_VERSION = @AlexVersion@
+#
+# Options to pass to Happy when we're going to compile the output with GHC
+#
+GHC_ALEX_OPTS = -g
+
+# Should we build haddock docs?
+HADDOCK_DOCS = YES
+# And HsColour the sources?
+ifeq "$(HSCOLOUR)" ""
+HSCOLOUR_SRCS = NO
+else
+HSCOLOUR_SRCS = YES
+endif
+
+#
+# Options for compiling in different `ways'.
+#
+# To configure up your own way, have a look at some of the standard ways
+# such as profiling, and create your own set of WAY_*_OPTS defs below.
+# After having done that, add your way string to WAYS, and after having
+# run the configure script, the different projects will add the new way
+# to the list of ways they support.
+#
+
+#
+# Definitions of the different ways:
+#
+# * their name:
+# - tag, e.g., p
+# - description, e.g., profiling
+# * what they mean to the driver:
+# - WAY_p_HC_OPTS gives the list of command-line options
+# to the driver.
+#
+
+#
+# The ways currently defined.
+#
+ALL_WAYS=p t s mp mg a b c d e f g h i j k l m n o A B
+USER_WAYS=a b c d e f g h j k l m n o A B
+
+#
+# The following ways currently have treated specially, p t mg,
+# as the driver script treats these guys specially and needs to carefully be told
+# about the options for these. Hence, we hide the required command line options
+# for these in the driver, as this is the only place they are needed.
+#
+# If you want to add to these default options, fill in the variables below:
+
+# Way 'i':
+WAY_i_NAME=ILX
+WAY_i_HC_OPTS= -filx -fruntime-types
+
+# Way 'p':
+WAY_p_NAME=profiling
+WAY_p_HC_OPTS= -prof
+
+# Way 't':
+WAY_t_NAME=ticky-ticky profiling
+WAY_t_HC_OPTS= -ticky
+
+# Way 'l':
+WAY_l_NAME=event logging
+WAY_l_HC_OPTS= -eventlog
+
+# Way `mp':
+WAY_mp_NAME=parallel
+WAY_mp_HC_OPTS=-parallel
+
+# Way `mg':
+WAY_mg_NAME=GranSim
+WAY_mg_HC_OPTS=-gransim
+
+#
+# These ways apply to the RTS only:
+#
+
+# Way 'thr':
+WAY_thr_NAME=threaded
+WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
+
+# Way 'thr_p':
+WAY_thr_p_NAME=threaded profiled
+WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
+
+# Way 'thr_l':
+WAY_thr_l_NAME=threaded event logging
+WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog
+
+# Way 'debug':
+WAY_debug_NAME=debug
+WAY_debug_HC_OPTS=-optc-DDEBUG
+
+# Way 'debug_p':
+WAY_debug_p_NAME=debug profiled
+WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
+
+# Way 'debug_t':
+WAY_debug_t_NAME=debug ticky-ticky profiling
+WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
+
+# Way 'thr_debug':
+WAY_thr_debug_NAME=threaded
+WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'thr_debug_p':
+WAY_thr_debug_p_NAME=threaded debug profiling
+WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
+
+# Way 'thr_debug_l':
+WAY_thr_debug_l_NAME=threaded debug event logging
+WAY_thr_debug_l_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -eventlog
+
+# Way 'dyn': build dynamic shared libraries
+WAY_dyn_NAME=dyn
+WAY_dyn_HC_OPTS=-fPIC -dynamic
+WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
+
+# Way 'thr_dyn':
+WAY_thr_dyn_NAME=thr_dyn
+WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
+
+# Way 'thr_debug_dyn':
+WAY_thr_debug_dyn_NAME=thr_dyn
+WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
+
+# Way 'debug_dyn':
+WAY_debug_dyn_NAME=thr_dyn
+WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
+
+#
+# Add user-way configurations here:
+#
+WAY_A_NAME=
+WAY_A_HC_OPTS=
+
+WAY_B_NAME=
+WAY_B_HC_OPTS=
+
+WAY_a_NAME=
+WAY_a_HC_OPTS=
+
+WAY_b_NAME=
+WAY_b_HC_OPTS=
+
+WAY_c_NAME=
+WAY_c_HC_OPTS=
+
+WAY_d_NAME=
+WAY_d_HC_OPTS=
+
+WAY_e_NAME=
+WAY_e_HC_OPTS=
+
+WAY_f_NAME=
+WAY_f_HC_OPTS=
+
+WAY_g_NAME=
+WAY_g_HC_OPTS=
+
+WAY_h_NAME=
+WAY_h_HC_OPTS=
+
+WAY_j_NAME=
+WAY_j_HC_OPTS=
+
+WAY_k_NAME=
+WAY_k_HC_OPTS=
+
+WAY_l_NAME=
+WAY_l_HC_OPTS=
+
+WAY_m_NAME=
+WAY_m_HC_OPTS=
+
+WAY_n_NAME=
+WAY_n_HC_OPTS=
+
+WAY_o_NAME=
+WAY_o_HC_OPTS=
+
+################################################################################
+#
+# 31-bit-Int Core files
+#
+################################################################################
+
+#
+# It is possible to configure the compiler and prelude to support 31-bit
+# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
+# architecture. Currently the only useful output from this option is external Core
+# files. The following additions to your build.mk will produce the
+# 31-bit core output. Note that this is *not* just a library "way"; the
+# compiler must be built a special way too.
+
+# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
+# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
+# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
+# SplitObjs=NO
+
+################################################################################
+#
+# Library configure arguments
+#
+################################################################################
+
+CONFIGURE_ARGS = @CONFIGURE_ARGS@
+
+################################################################################
+#
+# Bindist testing directory
+#
+################################################################################
+
+ifeq "$(Windows)" "YES"
+BIN_DIST_INST_SUBDIR = "install dir"
+else
+# I very much doubt that paths with spaces will work on Unix
+BIN_DIST_INST_SUBDIR = installed
+endif
+
+BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/$(BIN_DIST_INST_SUBDIR)
+
projects / ghc-hetmet.git / commitdiff