+++ /dev/null
-# -*-makefile-*-
-# @configure_input@
-#
-################################################################################
-#
-# config.mk.in
-#
-# This file supplies defaults for many tweakable build configuration
-# options. Some of the defaults are filled in by the autoconf-generated
-# configure script.
-#
-# DO NOT EDIT THIS FILE!
-#
-# - config.mk is auto-generated from config.mk.in by configure.
-# This may be triggered automatically by the build system (say
-# if config.mk.in has changed more recently than config.mk),
-# so if you edit config.mk your changes will be spammed.
-#
-# - Settings in this file may be overriden by giving replacement
-# definitions in build.mk. See build.mk.sample for a good
-# starting point for a build.mk file.
-#
-# If you don't have a build.mk file then you get defaults for everything.
-# The defaults should provide a reasonable vanilla build.
-#
-# This is one of only two files that configure generates (the other is config.h)
-#
-
-ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
-ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
-$(error GNU make version 3.79.1 or later is required.)
-endif
-endif
-
-################################################################################
-#
-# GHC Version
-#
-
-# ProjectVersion is treated as a *string*
-# ProjectVersionInt is treated as an *integer* (for cpp defines)
-
-# Versioning scheme: A.B.C
-# A: major version, decimal, any number of digits
-# B: minor version, decimal, any number of digits
-# C: patchlevel, one digit, omitted if zero.
-#
-# ProjectVersionInt does *not* contain the patchlevel (rationale: this
-# figure is used for conditional compilations, and library interfaces
-# etc. are not supposed to change between patchlevels).
-#
-# The ProjectVersionInt is included in interface files, and GHC
-# checks that it's reading interface generated by the same ProjectVersion
-# as itself. It does this even though interface file syntax may not
-# change between versions. Rationale: calling conventions or other
-# random .o-file stuff might change even if the .hi syntax doesn't
-
-ProjectName = @ProjectName@
-ProjectTags =
-ProjectVersion = @ProjectVersion@$(ProjectTags)
-ProjectVersionInt = @ProjectVersionInt@
-ProjectPatchLevel = @ProjectPatchLevel@
-
-################################################################################
-#
-# Platform variables
-#
-################################################################################
-
-# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
-# specifier. E.g. sparc-sun-solaris2
-#
-# Build platform: the platform on which we are doing this build
-# Host platform: the platform on which these binaries will run
-# Target platform: the platform for which this compiler will generate code
-#
-# We don't support build & host being different, because the build
-# process creates binaries that are run during the build, and also
-# installed.
-#
-# If host & target are different, then we are building a compiler
-# which will generate intermediate .hc files to port to the target
-# architecture for bootstrapping. The libraries and stage 2 compiler
-# will be built as HC files for the target system, and likely won't
-# build on this host platform.
-#
-# An important invariant is that for any piece of source code, the
-# platform on which the code is going to run is the HOST platform,
-# and the platform on which we are building is the BUILD platform.
-# Additionally for the compiler, the platform this compiler will
-# generate code for is the TARGET. TARGET is not meaningful outside
-# the compiler sources.
-#
-# Guidelines for when to use HOST vs. TARGET:
-#
-# - In the build system (Makefile, foo.mk), normally we should test
-# $(HOSTPLATFORM). There are some cases (eg. installation), where
-# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
-# doesn't matter which is used.
-#
-# - In the compiler itself, we should test HOST or TARGET depending
-# on whether the conditional relates to the code being generated, or
-# the platform on which the compiler is running. See the section
-# on "Coding Style" in the commentary for more details.
-#
-# - In all other code, we should be testing HOST only.
-#
-# NOTE: cross-compiling is not well supported by the build system.
-# You have to do a lot of work by hand to cross compile: see the
-# section on "Porting GHC" in the Building Guide.
-
-HOSTPLATFORM = @HostPlatform@
-TARGETPLATFORM = @TargetPlatform@
-BUILDPLATFORM = @BuildPlatform@
-
-# Hack alert:
-# in one or two places, we need to get at the OS version (major and
-# perhaps even minor), HostOS_Full is the OS name reported by
-# AC_CANONICAL_SYSTEM.
-#
-HostPlatform_CPP = @HostPlatform_CPP@
-HostArch_CPP = @HostArch_CPP@
-HostOS_CPP = @HostOS_CPP@
-HostOS_Full = @HostOS_Full@
-HostVendor_CPP = @HostVendor_CPP@
-
-TargetPlatform_CPP = @TargetPlatform_CPP@
-TargetArch_CPP = @TargetArch_CPP@
-TargetOS_CPP = @TargetOS_CPP@
-TargetVendor_CPP = @TargetVendor_CPP@
-
-BuildPlatform_CPP = @BuildPlatform_CPP@
-BuildArch_CPP = @BuildArch_CPP@
-BuildOS_CPP = @BuildOS_CPP@
-BuildVendor_CPP = @BuildVendor_CPP@
-
-@HostPlatform_CPP@_HOST = 1
-@TargetPlatform_CPP@_TARGET = 1
-@BuildPlatform_CPP@_BUILD = 1
-
-@HostArch_CPP@_HOST_ARCH = 1
-@TargetArch_CPP@_TARGET_ARCH = 1
-@BuildArch_CPP@_BUILD_ARCH = 1
-
-@HostOS_CPP@_HOST_OS = 1
-@TargetOS_CPP@_TARGET_OS = 1
-@BuildOS_CPP@_BUILD_OS = 1
-
-@HostVendor_CPP@_HOST_VENDOR = 1
-@TargetVendor_CPP@_TARGET_VENDOR = 1
-@BuildVendor_CPP@_BUILD_VENDOR = 1
-
-################################################################################
-#
-# Global configuration options
-#
-################################################################################
-
-# Leading underscores on symbol names in object files
-# Valid options: YES/NO
-#
-LeadingUnderscore=@LeadingUnderscore@
-
-# Pin a suffix on executables? If so, what (Windows only).
-exeext=@exeext@
-soext=@soext@
-
-# Windows=YES if on a Windows platform
-ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
-Windows=YES
-else
-Windows=NO
-endif
-
-# BootingFromHc - build GHC and the libraries from .hc files?
-BootingFromHc = @BootingFromHc@
-
-# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
-# rather than registerised code, i.e., disable the mangler?
-BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
-
-#
-# Which ways should DocBook XML documents be built?
-# options are: dvi ps pdf html chm HxS
-#
-XMLDocWays=
-
-# Should we build latex docs?
-LATEX_DOCS = NO
-
-# Mac OS X deployment target (to cross-compile for older OS versions)
-#
-MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
-MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
-
-ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
-MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
- -isysroot $(MACOSX_DEPLOYMENT_SDK) \
- --no-builtin-fprintf
-MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
- -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
-# We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
-# overwritten in build.mk and (b) we must not use the deployment options in
-# stage 1 or we get a linker error if the bootstrap compiler is for a more
-# recent OS version.
-#
-# We need --no-builtin-fprintf, as the use of the builtin function optimisation
-# for fprintf together with #include "PosixSource" in the RTS leads to the
-# use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2).
-endif
-
-################################################################################
-#
-# Variables that control how the compiler itself is built
-#
-################################################################################
-
-# The compiler used to build GHC is $(GHC). To change the actual compiler
-# used, re-configure with --with-ghc=<path-to-ghc>.
-
-# Extra ways in which to build the compiler (for example, you might want to
-# build a profiled compiler so you can see where it spends its time)
-GhcCompilerWays=
-
-# Extra option flags to pass to the compiler that compiles the compiler
-# (Ones that are essential are wired into compiler/Makefile)
-# Typical options to use here:
-#
-# -DDEBUG include debugging code and assertions (will make the
-# compiler slower and produce debugging output, but useful
-# for development)
-#
-# -dcore-lint check the types after every pass of the compiler;
-# a pretty strong internal check of the compiler being
-# used to compile GHC. Useful when bootstrapping.
-GhcHcOpts=-Rghc-timing
-
-# Extra options added to specific stages of the compiler bootstrap.
-# These are placed later on the command line, and may therefore
-# override options from $(GhcHcOpts).
-GhcStage1HcOpts=
-GhcStage2HcOpts=-O2
-GhcStage3HcOpts=-O2
-
-GhcProfiled=NO
-GhcDebugged=NO
-GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
-
-# Build shared and/or static libs?
-BuildSharedLibs=@BuildSharedLibs@
-# ToDo later:
-# BuildStaticLibs=@BuildStaticLibs@
-
-# Build a compiler that will build *unregisterised* libraries and
-# binaries by default. Unregisterised code is supposed to compile and
-# run without any support for architecture-specific assembly mangling,
-# register assignment or tail-calls, and is therefore a good way to get
-# started when porting GHC to new architectures.
-#
-# If this is set to NO, you can still use the unregisterised way
-# (way 'u') to get unregisterised code, but the default way will be
-# registerised.
-#
-# NOTE: the stage1 compiler will be a registerised binary (assuming
-# the compiler you build with is generating registerised binaries), but
-# the stage2 compiler will be an unregisterised binary.
-#
-ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
-GhcUnregisterised=YES
-else
-GhcUnregisterised=NO
-endif
-
-# Build a compiler with a native code generator backend
-# (as well as a C backend)
-#
-# Target platforms supported:
-# i386, powerpc
-# AIX is not supported
-ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)))
-OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
-
-# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
-GhcWithNativeCodeGen=$(strip\
- $(if $(filter YESYESNO,\
- $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
-
-HaveLibDL = @HaveLibDL@
-
-# ArchSupportsSMP should be set iff there is support for that arch in
-# includes/SMP.h
-ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
-
-# lazy test, because $(GhcUnregisterised) might be set in build.mk later.
-GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
-
-# Whether to include GHCi in the compiler. Depends on whether the RTS linker
-# has support for this OS/ARCH combination.
-
-OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
-ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
-
-ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
-GhcWithInterpreter=YES
-else
-GhcWithInterpreter=NO
-endif
-
-# GhcEnableTablesNextToCode tells us whether the target architecture
-# supports placing info tables directly before the entry code
-# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
-# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
-# code or not, which may be decided by options to the compiler later.
-ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
-GhcEnableTablesNextToCode=NO
-else
-GhcEnableTablesNextToCode=YES
-endif
-
-# On Windows we normally want to make a relocatable bindist, to we
-# ignore flags like libdir
-ifeq "$(Windows)" "YES"
-RelocatableBuild = YES
-else
-RelocatableBuild = NO
-endif
-
-# When building bindists we set this to yes so that the binaries are as
-# portable as possible.
-BeConservative = NO
-
-#
-# Building various ways?
-# (right now, empty if not).
-BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
-BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
-
-# Interface file version (hi-boot files only)
-#
-# A GHC built with HscIfaceFileVersion=n will look for
-# M.hi-boot-n, and only then for
-# M.hi-boot.
-# (It'll be happy with the latter if the former doesn't exist.)
-#
-#
-# This variable is used ONLY for hi-boot files. Its only purpose is
-# to allow you to have a single directory with multiple .hi-boot files
-# for the same module, each corresponding to a different version of
-# GHC.
-#
-# HscIfaceFileVersion is propagated to hsc via
-# compiler/main/Config.hs, which is automatically generated by
-# compiler/Makefile.
-
-HscIfaceFileVersion=6
-
-#------------------------------------------------------------------------------
-# Options for Libraries
-
-# Which directory (in libraries/) contains the integer library?
-INTEGER_LIBRARY=integer-gmp
-
-# What extra ways to build the libraries in
-# In addition to the normal sequential way, the default is to also build
-# profiled prelude libraries.
-# When booting from .hc files, turn this off.
-ifeq "$(BootingFromHc)" "YES"
-GhcLibWays=
-else
-GhcLibWays=p
-endif
-
-ifeq "$(BuildSharedLibs)" "YES"
-GhcLibWays += dyn
-endif
-
-# In addition, the RTS is built in some further variations. Ways that
-# make sense here:
-#
-# thr : threaded
-# thr_p : threaded profiled
-# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
-# debug_p : debugging profiled
-# thr_debug : debugging threaded
-# thr_debug_p : debugging threaded profiled
-# t : ticky-ticky profiling
-# debug_t : debugging ticky-ticky profiling
-# l : event logging
-# thr_l : threaded and event logging
-# thr_debug_l : threaded and debugging and event logging
-#
-GhcRTSWays=l
-
-# Usually want the debug version
-ifeq "$(BootingFromHc)" "NO"
-GhcRTSWays += debug
-endif
-
-ifeq "$(BuildSharedLibs)" "YES"
-GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn
-endif
-
-# Want the threaded versions unless we're unregisterised
-# Defer the check until later by using $(if..), because GhcUnregisterised might
-# be set in build.mk, which hasn't been read yet.
-GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_debug thr_l,)
-GhcRTSWays += $(if $(findstring p, $(GhcLibWays)),$(if $(findstring NO, $(GhcUnregisterised)),thr_p,),)
-
-# We can only build GHCi threaded if we have a threaded RTS:
-GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
-
-# Option flags to pass to GHC when it's compiling modules in
-# fptools/libraries. Typically these are things like -O or
-# -dcore-lint or -H32m. The ones that are *essential* are wired into
-# the build system.
-#
-# -O(2) is pretty desirable, otherwise no inlining of prelude
-# things (incl "+") happens when compiling with this compiler
-#
-# -XGenerics switches on generation of support code for
-# derivable type classes. This is now off by default,
-# but we switch it on for the libraries so that we generate
-# the code in case someone importing wants it
-
-GhcLibHcOpts=-O2 -Rghc-timing -XGenerics
-
-# Win32 only: Enable the RTS and libraries to be built as DLLs
-DLLized=@EnableWin32DLLs@
-
-# Strip local symbols from libraries? This can make the libraries smaller,
-# but makes debugging somewhat more difficult. Doesn't work with all ld's.
-#
-StripLibraries=NO
-
-# These are the URL patterns that Haddock uses to generate the "Source
-# File" links on each page.
-PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
-
-# ----------------------------------------------------------------------------
-# Object-file splitting
-#
-# Set SplitObjs=YES or NO in your build.mk
-#
-# Don't use -split-objs in in GhcLibHcOpts, because the build
-# system needs to do other special magic if you are
-# doing object-file splitting
-
-ArchSupportsSplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),YES,NO))
-
-# lazy test, so that $(GhcUnregisterised) can be set in build.mk
-SupportsSplitObjs=$(strip $(if $(filter YES,$(ArchSupportsSplitObjs)),\
- $(if $(filter NO,$(BootingFromHc)),\
- $(if $(filter NO,$(GhcUnregisterised)),\
- YES,\
- NO),\
- NO),\
- NO))
-
-# By default, enable SplitObjs for the libraries if this build supports it
-SplitObjs=$(SupportsSplitObjs)
-
-# Math library
-LIBM=@LIBM@
-
-# .NET interop support?
-#
-DotnetSupport=NO
-
-# Build unix package?
-#
-GhcLibsWithUnix=@GhcLibsWithUnix@
-
-# ----------------------------------------------------------------------------
-# Options for GHC's RTS
-
-# For an optimised RTS (you probably don't want to change these; we build
-# a debugging RTS by default now. Use -debug to get it).
-GhcRtsHcOpts=-optc-O2
-GhcRtsCcOpts=-fomit-frame-pointer
-
-# Include the front panel code? Needs GTK+.
-GhcRtsWithFrontPanel = NO
-
-# Include support for CPU performance counters via the PAPI library in the RTS?
-# (PAPI: http://icl.cs.utk.edu/papi/)
-GhcRtsWithPapi = NO
-PapiLibDir=
-PapiIncludeDir=
-
-################################################################################
-#
-# nofib
-#
-# nofib specific options
-#
-################################################################################
-
-WithNofibHc = $(GHC_INPLACE)
-
-# NoFibSubDirs controls which set of tests should be run
-# You can run one or more of
-# imaginary
-# spectral
-# real
-# parallel
-# PRIVATE
-# PENDING
-# UNUSED
-NoFibSubDirs = imaginary spectral real
-
-# The different ways to build nofib. Default is just to mirror
-# what is done for the ghc prelude libraries.
-#
-NoFibWays = $(GhcLibWays)
-
-# Haskell compiler options for nofib
-NoFibHcOpts = -O
-
-# Number of times to run each program
-NoFibRuns = 5
-
-################################################################################
-#
-# Paths (see paths.mk)
-#
-################################################################################
-
-# Directory used by GHC (and possibly other tools) for storing
-# temporary files. If your TMPDIR isn't big enough, either override
-# this in build.mk or set your environment variable "TMPDIR" to point
-# to somewhere with more space. (TMPDIR=. is a good choice).
-
-# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
-# override an environment variable with the value of the make variable
-# of the same name (if it exists) when executing sub-processes, so
-# setting the TMPDIR env var would have no effect in the build tree.
-
-DEFAULT_TMPDIR = /tmp
-ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
-DEFAULT_TMPDIR = /C/TEMP
-endif
-ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-DEFAULT_TMPDIR = /C/TEMP
-endif
-
-# FPTOOLS_TOP_ABS: the top of the fptools hierarchy, absolute path.
-# On Windows this is a c:/foo/bar style path.
-FPTOOLS_TOP_ABS = @hardtop@
-
-BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
-BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
-
-BIN_DIST_NAME=ghc-$(ProjectVersion)
-BIN_DIST_TAR=$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
-BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
-BIN_DIST_PREP_DIR=$(FPTOOLS_TOP_ABS)/bindist-prep
-BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
-BIN_DIST_LIST=$(FPTOOLS_TOP_ABS)/bindist-list
-
-# Definition of installation directories, we don't use half of these, but since
-# the configure script has them on offer while passing through, we might as well
-# set them. Note that we have to be careful, because the GNU coding standards
-# have changed a bit over the course of time, and autoconf development reflects
-# this.
-#
-# A little bit of history regarding autoconf and GNU coding standards, use this
-# as a cheat-sheet for the stuff below:
-#
-# variable | default < 2.60 | default >= 2.60
-# ------------+--------------------+--------------------------------------
-# exec_prefix | ${prefix} | ${prefix}
-# libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
-# datarootdir | NONE! | ${prefix}/share
-# datadir | ${prefix}/share | ${datarootdir}
-# infodir | ${prefix}/info | ${datarootdir}/info
-# mandir | ${prefix}/man | ${datarootdir}/man
-# docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
-# htmldir | NONE! | ${docdir}
-# dvidir | NONE! | ${docdir}
-# pdfdir | NONE! | ${docdir}
-# psdir | NONE! | ${docdir}
-#
-# NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
-# string "${docdir}", not the value of docdir! This is crucial for the GNU
-# coding standards.
-
-# This gets used in the default docdir when autoconf >= 2.60 is used
-PACKAGE_TARNAME := @PACKAGE_TARNAME@
-
-prefix := @prefix@
-
-# New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
-# However, in order to support older autoconf's we don't use it.
-# datarootdir is set lower down instead.
-# But, as datadir is defined in terms of datarootdir, we also need to
-# set it to the value (if any) that configure gives it here.
-datarootdir := @datarootdir@
-
-exec_prefix := @exec_prefix@
-bindir := @bindir@
-datadir0 := @datadir@
-libdir0 := @libdir@
-includedir := @includedir@
-mandir := @mandir@
-dynlibdir := @libdir@
-
-ifeq "$(RelocatableBuild)" "YES"
-
-# Hack: our directory layouts tend to be different on Windows, so
-# hack around configure's bogus assumptions here.
-datarootdir := $(prefix)
-datadir := $(prefix)
-libdir := $(prefix)
-
-docdir := $(prefix)/doc
-htmldir := $(docdir)
-dvidir := $(docdir)
-pdfdir := $(docdir)
-psdir := $(docdir)
-
-else
-
-# Unix: override libdir and datadir to put ghc-specific stuff in
-# a subdirectory with the version number included.
-#
-# datadir is set to libdir here as GHC needs package.conf and unlit
-# to be in the same place (and things like ghc-pkg need to agree on
-# where package.conf is, so we just set it globally).
-#
-datarootdir := $(datadir0)
-libdir := $(libdir0)/ghc-$(ProjectVersion)
-datadir := $(libdir)
-
-# New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
-# However, in order to support older autoconf's we don't use them.
-
-#docdir := @docdir@
-#htmldir := @htmldir@
-#dvidir := @dvidir@
-#pdfdir := @pdfdir@
-#psdir := @psdir@
-
-docdir := $(datarootdir)/doc/ghc
-htmldir := $(docdir)
-dvidir := $(docdir)
-pdfdir := $(docdir)
-psdir := $(docdir)
-
-endif # Windows
-
-headerdir := $(libdir)/include
-
-# Default place for putting interface files is $(libdir)
-# (overriden for packages in package.mk)
-ifacedir = $(libdir)
-
-# NOTE: by intention, libexecdir and libdir point to
-# the same place.
-# => Only way to override this is to set libexecdir= on the command line.
-# (NOTE: configure script setting is ignored).
-libexecdir = $(libdir)
-
-GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/install-inplace/bin/ghc-pkg
-
-#-----------------------------------------------------------------------------
-# install configuration
-
-#
-# Set this to have files installed with a specific owner
-#
-INSTALL_OWNER =
-
-#
-# Set this to have files installed with a specific group
-#
-INSTALL_GROUP =
-
-#
-# Invocations of `install' for the four different classes
-# of targets:
-#
-INSTALL_PROGRAM = $(INSTALL) -m 755
-INSTALL_SCRIPT = $(INSTALL) -m 755
-INSTALL_SHLIB = $(INSTALL) -m 755
-INSTALL_DATA = $(INSTALL) -m 644
-INSTALL_HEADER = $(INSTALL) -m 644
-INSTALL_MAN = $(INSTALL) -m 644
-INSTALL_DIR = $(MKDIRHIER)
-
-#
-# runhaskell and hsc2hs are special, in that other compilers besides
-# GHC might provide them. Systems with a package manager often come
-# with tools to manage this kind of clash, e.g. RPM's
-# update-alternatives. When building a distribution for such a system,
-# we recommend setting both of the following to 'YES'.
-#
-# NO_INSTALL_RUNHASKELL = YES
-# NO_INSTALL_HSC2HS = YES
-#
-# NB. we use negative tests here because for binary-distributions we cannot
-# test build-time variables at install-time, so they must default to on.
-
-# -----------------------------------------------------------------------------
-# Utilities programs: flags
-
-# If you want to give any standard flags to pretty much any utility
-# (see utils.mk for a complete list), by adding a line here
-#
-# SRC_P_OPTS += ...
-#
-# where P is the utility. For example, to add -O to all Haskell
-# compilations,
-#
-# SRC_HC_OPTS += -O
-
-SRC_HC_OPTS += -H32m -O
-
-# These flags make flex 8-bit
-SRC_FLEX_OPTS += -8
-
-# lint gets all CPP's flags too
-SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
-WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
-
-# Default fptools options for dllwrap.
-SRC_BLD_DLL_OPTS += --target=i386-mingw32
-
-# Flags for CPP when running GreenCard on .pgc files
-GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
-
-
-################################################################################
-#
-# Layout of the source tree
-#
-################################################################################
-
-# Here we provide defines for the various directories in the source tree,
-# so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
-# indicates a directory relative to the top of the source tree, whereas
-# $(GHC_FOO_DIR) is a directory relative to the current directory.
-# $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
-
-GHC_UTILS_DIR_REL = utils
-GHC_INCLUDE_DIR_REL = includes
-GHC_COMPILER_DIR_REL = ghc
-GHC_RTS_DIR_REL = rts
-GHC_UTILS_DIR_REL = utils
-GHC_DRIVER_DIR_REL = driver
-GHC_COMPAT_DIR_REL = compat
-
-GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
-GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
-GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
-GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
-GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
-GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
-GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
-GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
-GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
-GHC_GHCTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/ghctags
-GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
-GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
-GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
-GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
-GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
-
-GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
-GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
-GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
-
-INPLACE_DATA_DIR = $(FPTOOLS_TOP_ABS)/inplace-datadir
-
-GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
-GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
-GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
-GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
-GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
-GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
-GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
-
-GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
-GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
-GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
-GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
-GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
-GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
-GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
-GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
-GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
-GHC_GHCTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_GHCTAGS_DIR_REL)
-GHC_HSC2HS_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
-GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
-GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
-GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
-GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
-
-GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
-GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
-GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
-
-GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
-GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
-GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
-GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
-GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
-GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
-GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
-
-GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
-GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
-GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
-GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
-GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
-GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
-GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
-GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
-GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
-GHC_GHCTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GHCTAGS_DIR_REL)
-GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
-GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
-GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
-GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
-GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
-GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
-
-GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
-GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
-GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
-
-# -----------------------------------------------------------------------------
-# Names of programs in the GHC tree
-#
-# xxx_PGM the name of an executable, without the path
-# xxx the executable relative to the current dir
-
-GHC_UNLIT_PGM = unlit$(exeext)
-GHC_HP2PS_PGM = hp2ps
-GHC_HSTAGS_PGM = hasktags
-GHC_GHCTAGS_INPLACE_PGM = ghctags-inplace
-GHC_HSC2HS_INPLACE_PGM = hsc2hs
-GHC_TOUCHY_PGM = touchy$(exeext)
-GHC_MANGLER_PGM = ghc-asm
-GHC_SPLIT_PGM = ghc-split
-GHC_SYSMAN_PGM = SysMan
-GHC_GENPRIMOP_PGM = genprimopcode
-GHC_GENAPPLY_PGM = genapply
-GHC_MKDEPENDC_PGM = mkdependC
-GHC_LTX_PGM = ltx
-GHC_MKDIRHIER_PGM = mkdirhier
-GHC_LNDIR_PGM = lndir
-GHC_RUNTEST_PGM = runstdtest
-
-ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-GHC_CP = "xcopy /y"
-GHC_PERL = perl
-else
-GHC_CP = $(CP)
-GHC_PERL = $(PERL)
-endif
-
-UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
-HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
-HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
-GHCTAGS_INPLACE = $(GHC_GHCTAGS_DIR)/$(GHC_GHCTAGS_INPLACE_PGM)
-HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/install-inplace/bin/$(GHC_HSC2HS_INPLACE_PGM)
-MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
-SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
-SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
-GHC_PKG_INPLACE = $(GHC_PKG_PROG)
-GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
-GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
-MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
-LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
-MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
-LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
-RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
-
-GENERATED_FILE = chmod a-w
-EXECUTABLE_FILE = chmod +x
-
-#-----------------------------------------------------------------------------
-# Haskell compilers and mkdependHS
-
-# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
-# compilers, if available.
-#
-# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
-# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
-#
-# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
-# (because the version numbers have to be calculated).
-
-GHC = @WithGhc@
-GhcDir = $(dir $(GHC))
-
-# Set to YES if $(GHC) has the editline package installed
-GhcHasEditline = @GhcHasEditline@
-
-HBC = @HBC@
-NHC = @NHC@
-
-# Sometimes we want to invoke ghc from the build tree in different
-# places (eg. it's handy to have a nofib & a ghc build in the same
-# tree). We can refer to "this ghc" as $(GHC_INPLACE):
-
-GHC_INPLACE = $(GHC_STAGE1)
-GHC_STAGE1 = $(GHC_COMPILER_DIR_ABS)/stage1-inplace/ghc
-GHC_STAGE2 = $(GHC_COMPILER_DIR_ABS)/stage2-inplace/ghc
-GHC_STAGE3 = $(GHC_COMPILER_DIR_ABS)/stage3-inplace/ghc
-# XXX All those used to have -no-user-package-conf, but then we can't
-# pass them to Cabal
-
-BOOTSTRAPPING_CONF = $(FPTOOLS_TOP_ABS)/libraries/bootstrapping.conf
-
-# NOTE: add -no-user-package-conf for stage 1-3 above, so that
-# we avoid picking up any packages the user might happen to have
-# installed for this GHC version. They are bound to be incompatible
-# with the packages we built in the tree.
-
-ifeq "$(stage)" "2"
- UseStage1 = YES
-endif
-ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
-
-# We are using the stage1 compiler to compile Haskell code, set up
-# some variables appropriately:
-HC =$(GHC_STAGE1)
-MKDEPENDHS =$(GHC_STAGE1)
-USE_NEW_MKDEPEND_FLAGS = YES
-GhcVersion = @ProjectVersion@
-GhcPatchLevel = @ProjectPatchLevel@
-# oops, these are wrong:
-GhcMajVersion = @GhcMajVersion@
-GhcMinVersion = @GhcMinVersion@
-
-ghc_ge_607 = YES
-ghc_ge_609 = YES
-
-else # not UseStage1 or BootingFromHc
-
-# Some useful GHC version predicates:
-ghc_ge_607 = @ghc_ge_607@
-ghc_ge_609 = @ghc_ge_609@
-
-HC = @WithHc@
-MKDEPENDHS = $(GHC)
-USE_NEW_MKDEPEND_FLAGS = $(ghc_ge_609)
-GhcVersion = @GhcVersion@
-GhcPatchLevel = @GhcPatchLevel@
-GhcMajVersion = @GhcMajVersion@
-GhcMinVersion = @GhcMinVersion@
-
-# We build a few packages using the installed GHC as part of the
-# bootstrapping process. These are installed into a local
-# package.conf file, $(BOOTSTRAPPING_CONF). When we invoke the
-# installed GHC we need to pass it -package-conf $(BOOTSTRAPPING_CONF).
-# So the following variables expand to -package-conf $(BOOTSTRAPPING_CONF)
-# when $(HC) does *not* point to one of the GHC binaries built in
-# the local tree.
-#
-BOOTSTRAPPING_PACKAGE_CONF_HC_OPTS =$(if $(findstring inplace, $(HC)),,-package-conf $(BOOTSTRAPPING_CONF))
-BOOTSTRAPPING_PACKAGE_CONF_MKDEPENDHS_OPTS =$(if $(findstring inplace, $(MKDEPENDHS)),,-package-conf $(BOOTSTRAPPING_CONF))
-endif
-
-# Canonicalised ghc version number, used for easy (integer) version
-# comparisons. We must expand $(GhcMinVersion) to two digits by
-# adding a leading zero if necessary:
-ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
-GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
-else
-GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
-endif
-
-#-----------------------------------------------------------------------------
-# C compiler
-#
-# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
-# the flag --with-gcc=<blah> instead. The reason is that the configure script
-# needs to know which gcc you're using in order to perform its tests.
-
-HaveGcc = @HaveGcc@
-UseGcc = YES
-WhatGccIsCalled = @WhatGccIsCalled@
-GccVersion = @GccVersion@
-ifeq "$(strip $(HaveGcc))" "YES"
-ifneq "$(strip $(UseGcc))" "YES"
- CC = cc
-else
- CC = $(WhatGccIsCalled)
- GccDir = $(dir $(WhatGccIsCalled))
-endif
-endif
-
-# default C compiler flags
-SRC_CC_OPTS = @SRC_CC_OPTS@
-
-ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
-SRC_CC_OPTS += -G0
-endif
-
-SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
-SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
-
-#-----------------------------------------------------------------------------
-# GMP Library (version 2.0.x or above)
-#
-HaveLibGmp = @HaveLibGmp@
-LibGmp = @LibGmp@
-
-GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
-GMP_LIB_DIRS=@GMP_LIB_DIRS@
-
-#-----------------------------------------------------------------------------
-# GMP framework (Mac OS X)
-#
-HaveFrameworkGMP = @HaveFrameworkGMP@
-
-#-----------------------------------------------------------------------------
-# Mingwex Library
-#
-HaveLibMingwEx = @HaveLibMingwEx@
-
-#-----------------------------------------------------------------------------
-# Flex (currently unused, could be moved to glafp-utils)
-
-# FLEX = @LEX@
-# Don't bother with -lfl, we define our own yywrap()s anyway.
-# FLEX_LIB =
-#WAS:FLEX_LIB = @LEXLIB@
-
-#-----------------------------------------------------------------------------
-# Other standard (ha!) Unix utilities
-
-AR = @ArCmd@
-ArSupportsInput = @ArSupportsInput@
-# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
-BASH = /usr/local/bin/bash
-
-CONTEXT_DIFF = @ContextDiffCmd@
-CP = cp
-CPP = @CPP@ @CPPFLAGS@
-CTAGS = $(ETAGS)
-#
-# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
-# behave plausibly on Haskell sources.
-#
-RAWCPP_FLAGS = -undef -traditional
-FIND = @FindCmd@
-SORT = @SortCmd@
-INSTALL = @INSTALL@
-#
-# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
-# install-sh script (if chosen). This not terribly useful to us, so we convert
-# it into an abs. path.
-#
-INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
-LATEX = latex
-HEVEA = hevea
-HACHA = hacha
-LN_S = @LN_S@
-MANMACROS = -man
-MSMACROS = -ms
-MV = mv
-NROFF = nroff
-PERL = @PerlCmd@
-PYTHON = @PythonCmd@
-PIC = pic
-PREPROCESSCMD = $(CC) -E
-RANLIB = @RANLIB@
-RM = rm -f
-SED = @SedCmd@
-SHELL = /bin/sh
-
-LD = @LdCmd@
-
-# Some ld's support the -x flag and some don't, so the configure
-# script detects which we have and sets LdXFlag to "-x" or ""
-# respectively.
-LD_X = @LdXFlag@
-
-# GNU ld supports input via a linker script, which is useful to avoid
-# overflowing command-line length limits.
-LdIsGNULd = @LdIsGNULd@
-
-#
-# In emergency situations, REAL_SHELL is used to perform shell commands
-# from within the ghc driver script, by scribbling the command line to
-# a temp file and then having $(REAL_SHELL) execute it.
-#
-# The reason for having to do this is that overly long command lines
-# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
-# 2.5.1), which is why this backdoor is provided. The situation of overly
-# long command lines is either encountered while doing `make boot' in compiler/,
-# or when linking the compiler binary (`hsc').
-#
-# We do not use SHELL to execute long commands, as `make' will more than likely
-# override whatever setting you have in your environment while executing.
-
-# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
-# as it is SHELL that will show up the bogosity in the first place, but setting
-# it to anything else isn't really portable.
-#
-# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
-# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
-# command shell.
-#
-REAL_SHELL=$(SHELL)
-SIZE = size
-STRIP = strip
-TAR = @TarCmd@
-ZIP = zip
-
-HSCOLOUR = @HSCOLOUR@
-
-#
-# This is special to literate/, ToDo: add literate-specific
-# configure setup to literate/.
-#
-TBL = tbl
-TEX = tex
-TGRIND = tgrind
-TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
-TIB = tib
-
-TIME = @TimeCmd@
-TROFF = troff
-UNAME = uname
-
-# GTK+
-GTK_CONFIG = @GTK_CONFIG@
-
-# Set this if you want to use Inno Setup to build a Windows installer
-# when you make a bindist
-ISCC =
-
-#-----------------------------------------------------------------------------
-# DocBook XML stuff
-
-XSLTPROC = @XsltprocCmd@
-XMLLINT = @XmllintCmd@
-FOP = @FopCmd@
-XMLTEX = @XmltexCmd@
-PDFXMLTEX = @PdfxmltexCmd@
-DVIPS = @DvipsCmd@
-
-DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
-
-XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
- --stringparam section.autolabel 1 \
- --stringparam section.label.includes.component.label 1
-
-#-----------------------------------------------------------------------------
-# FPtools support software
-
-BLD_DLL = dllwrap
-
-#
-# .NET support software
-#
-ILX2IL = ilx2il
-ILASM = ilasm
-
-#
-# ghc-pkg
-#
-GHC_PKG = @GhcPkgCmd@
-
-#
-# GreenCard
-#
-GREENCARD = @GreenCardCmd@
-GREENCARD_VERSION = @GreenCardVersion@
-
-#
-# Happy
-#
-HAPPY = @HappyCmd@
-HAPPY_VERSION = @HappyVersion@
-#
-# Options to pass to Happy when we're going to compile the output with GHC
-#
-GHC_HAPPY_OPTS = -agc --strict
-
-# Temp. to work around performance problems in the HEAD around 8/12/2003,
-# A Happy compiled with this compiler needs more stack.
-SRC_HAPPY_OPTS = +RTS -K2m -RTS
-
-#
-# Alex
-#
-ALEX = @AlexCmd@
-ALEX_VERSION = @AlexVersion@
-#
-# Options to pass to Happy when we're going to compile the output with GHC
-#
-GHC_ALEX_OPTS = -g
-
-# Should we build haddock docs?
-HADDOCK_DOCS = YES
-# And HsColour the sources?
-ifeq "$(HSCOLOUR)" ""
-HSCOLOUR_SRCS = NO
-else
-HSCOLOUR_SRCS = YES
-endif
-
-#
-# Options for compiling in different `ways'.
-#
-# To configure up your own way, have a look at some of the standard ways
-# such as profiling, and create your own set of WAY_*_OPTS defs below.
-# After having done that, add your way string to WAYS, and after having
-# run the configure script, the different projects will add the new way
-# to the list of ways they support.
-#
-
-#
-# Definitions of the different ways:
-#
-# * their name:
-# - tag, e.g., p
-# - description, e.g., profiling
-# * what they mean to the driver:
-# - WAY_p_HC_OPTS gives the list of command-line options
-# to the driver.
-#
-
-#
-# The ways currently defined.
-#
-ALL_WAYS=p t s mp mg a b c d e f g h i j k l m n o A B
-USER_WAYS=a b c d e f g h j k l m n o A B
-
-#
-# The following ways currently have treated specially, p t mg,
-# as the driver script treats these guys specially and needs to carefully be told
-# about the options for these. Hence, we hide the required command line options
-# for these in the driver, as this is the only place they are needed.
-#
-# If you want to add to these default options, fill in the variables below:
-
-# Way 'i':
-WAY_i_NAME=ILX
-WAY_i_HC_OPTS= -filx -fruntime-types
-
-# Way 'p':
-WAY_p_NAME=profiling
-WAY_p_HC_OPTS= -prof
-
-# Way 't':
-WAY_t_NAME=ticky-ticky profiling
-WAY_t_HC_OPTS= -ticky
-
-# Way 'l':
-WAY_l_NAME=event logging
-WAY_l_HC_OPTS= -eventlog
-
-# Way `mp':
-WAY_mp_NAME=parallel
-WAY_mp_HC_OPTS=-parallel
-
-# Way `mg':
-WAY_mg_NAME=GranSim
-WAY_mg_HC_OPTS=-gransim
-
-#
-# These ways apply to the RTS only:
-#
-
-# Way 'thr':
-WAY_thr_NAME=threaded
-WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
-
-# Way 'thr_p':
-WAY_thr_p_NAME=threaded profiled
-WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
-
-# Way 'thr_l':
-WAY_thr_l_NAME=threaded event logging
-WAY_thr_l_HC_OPTS=-optc-DTHREADED_RTS -eventlog
-
-# Way 'debug':
-WAY_debug_NAME=debug
-WAY_debug_HC_OPTS=-optc-DDEBUG
-
-# Way 'debug_p':
-WAY_debug_p_NAME=debug profiled
-WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
-
-# Way 'debug_t':
-WAY_debug_t_NAME=debug ticky-ticky profiling
-WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
-
-# Way 'thr_debug':
-WAY_thr_debug_NAME=threaded
-WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'thr_debug_p':
-WAY_thr_debug_p_NAME=threaded debug profiling
-WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
-
-# Way 'thr_debug_l':
-WAY_thr_debug_l_NAME=threaded debug event logging
-WAY_thr_debug_l_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -eventlog
-
-# Way 'dyn': build dynamic shared libraries
-WAY_dyn_NAME=dyn
-WAY_dyn_HC_OPTS=-fPIC -dynamic
-WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
-
-# Way 'thr_dyn':
-WAY_thr_dyn_NAME=thr_dyn
-WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
-
-# Way 'thr_debug_dyn':
-WAY_thr_debug_dyn_NAME=thr_dyn
-WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
-
-# Way 'debug_dyn':
-WAY_debug_dyn_NAME=thr_dyn
-WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
-
-#
-# Add user-way configurations here:
-#
-WAY_A_NAME=
-WAY_A_HC_OPTS=
-
-WAY_B_NAME=
-WAY_B_HC_OPTS=
-
-WAY_a_NAME=
-WAY_a_HC_OPTS=
-
-WAY_b_NAME=
-WAY_b_HC_OPTS=
-
-WAY_c_NAME=
-WAY_c_HC_OPTS=
-
-WAY_d_NAME=
-WAY_d_HC_OPTS=
-
-WAY_e_NAME=
-WAY_e_HC_OPTS=
-
-WAY_f_NAME=
-WAY_f_HC_OPTS=
-
-WAY_g_NAME=
-WAY_g_HC_OPTS=
-
-WAY_h_NAME=
-WAY_h_HC_OPTS=
-
-WAY_j_NAME=
-WAY_j_HC_OPTS=
-
-WAY_k_NAME=
-WAY_k_HC_OPTS=
-
-WAY_l_NAME=
-WAY_l_HC_OPTS=
-
-WAY_m_NAME=
-WAY_m_HC_OPTS=
-
-WAY_n_NAME=
-WAY_n_HC_OPTS=
-
-WAY_o_NAME=
-WAY_o_HC_OPTS=
-
-################################################################################
-#
-# 31-bit-Int Core files
-#
-################################################################################
-
-#
-# It is possible to configure the compiler and prelude to support 31-bit
-# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
-# architecture. Currently the only useful output from this option is external Core
-# files. The following additions to your build.mk will produce the
-# 31-bit core output. Note that this is *not* just a library "way"; the
-# compiler must be built a special way too.
-
-# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
-# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
-# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
-# SplitObjs=NO
-
-################################################################################
-#
-# Library configure arguments
-#
-################################################################################
-
-CONFIGURE_ARGS = @CONFIGURE_ARGS@
-
-################################################################################
-#
-# Bindist testing directory
-#
-################################################################################
-
-ifeq "$(Windows)" "YES"
-BIN_DIST_INST_SUBDIR = "install dir"
-else
-# I very much doubt that paths with spaces will work on Unix
-BIN_DIST_INST_SUBDIR = installed
-endif
-
-BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/$(BIN_DIST_INST_SUBDIR)
-
projects / ghc-hetmet.git / commitdiff