-// FIXME
-// Copyright 2002 Adam Megacz, see the COPYING file for licensing [GPL]
-package org.ibex;
+// Copyright 2000-2005 the Contributors, as shown in the revision logs.
+// Licensed under the GNU General Public License version 2 ("the License").
+// You may not use this file except in compliance with the License.
+
+package org.ibex.graphics;
import java.util.*;
+import org.ibex.util.*;
-// FIXME: offer a "subpixel" mode where we pass floats to the Platform and don't do any snapping
-// FIXME: fracture when realizing instead of when parsing?
+/** an abstract path; may contain splines and arcs */
+public class Path {
-/*
- v1.0
- - textpath
- - gradients
- - patterns
- - clipping/masking
- - filters (filtering of a group must be performed AFTER the group is assembled; sep. canvas)
+ public static final float PX_PER_INCH = 72;
+ public static final float INCHES_PER_CM = (float)0.3937;
+ public static final float INCHES_PER_MM = INCHES_PER_CM / 10;
+ private static final int DEFAULT_PATHLEN = 1000;
+ private static final int NUMSTEPS = 10;
+ private static final float PI = (float)Math.PI;
- v1.1
- - bump caps [requires Paint that can fill circles...] [remember to distinguish between closed/unclosed]
- - line joins
- - mitre (hard)
- - bevel (easy)
- - bump (easy, but requires 'round' Paint)
- - subtree sharing? otherwise the memory consumption might be outrageous... clone="" attribute?
- - better clipping
- - intersect clip regions (linearity)
- - clip on trapezoids, not pixels
- - faster gradients and patterns:
- - transform each corner of the trapezoid and then interpolate
-*/
+ boolean closed = false;
+ Curve head = null;
+ Curve tail = null;
+ protected void add(Curve c) {
+ if (head==null) { tail=head=c; return; }
+ c.prev = tail;
+ tail.next = c;
+ tail = c;
+ }
-/** Ibex's fully conformant Static SVG Viewer; see SVG spec, section G.7 */
-public final class VectorGraphics {
+ public void addTo(Mesh m, boolean evenOdd) {
+ for(Curve c = head; c != null; c = c.next) c.addTo(m);
+ m.setIn(evenOdd);
+ }
- // Private Constants ///////////////////////////////////////////////////////////////////
+ abstract class Curve {
+ Curve next, prev;
+ float x, y;
+ float c1x, c1y, c2x, c2y;
+ public Curve() { }
+ public abstract void addTo(Mesh ret);
+ }
- private static final int DEFAULT_PATHLEN = 1000;
- private static final float PI = (float)Math.PI;
+ class Line extends Curve {
+ public void addTo(Mesh ret) {
+ float rx = next.x;
+ float ry = next.y;
+ ret.add(rx,ry);
+ }
+ }
+ class Move extends Curve {
+ public void addTo(Mesh ret) {
+ ret.newcontour();
+ if (next==null) return;
+ float rx = next.x;
+ float ry = next.y;
+ ret.add(rx, ry);
+ }
+ }
- // Public entry points /////////////////////////////////////////////////////////////////
+ class Arc extends Curve {
+ public void addTo(Mesh ret) {
+ System.out.println("ARC!");
+ float rx = c1x;
+ float ry = c1y;
+ float phi = c2x;
+ float fa = ((int)c2y) >> 1;
+ float fs = ((int)c2y) & 1;
+ float x1 = x;
+ float y1 = y;
+ float x2 = next.x;
+ float y2 = next.y;
+
+ // F.6.5: given x1,y1,x2,y2,fa,fs, compute cx,cy,theta1,dtheta
+ float x1_ = (float)Math.cos(phi) * (x1 - x2) / 2 + (float)Math.sin(phi) * (y1 - y2) / 2;
+ float y1_ = -1 * (float)Math.sin(phi) * (x1 - x2) / 2 + (float)Math.cos(phi) * (y1 - y2) / 2;
+ float tmp = (float)Math.sqrt((rx * rx * ry * ry - rx * rx * y1_ * y1_ - ry * ry * x1_ * x1_) /
+ (rx * rx * y1_ * y1_ + ry * ry * x1_ * x1_));
+ float cx_ = (fa == fs ? -1 : 1) * tmp * (rx * y1_ / ry);
+ float cy_ = (fa == fs ? -1 : 1) * -1 * tmp * (ry * x1_ / rx);
+ float cx = (float)Math.cos(phi) * cx_ - (float)Math.sin(phi) * cy_ + (x1 + x2) / 2;
+ float cy = (float)Math.sin(phi) * cx_ + (float)Math.cos(phi) * cy_ + (y1 + y2) / 2;
+
+ // F.6.4 Conversion from center to endpoint parameterization
+ float ux = 1, uy = 0, vx = (x1_ - cx_) / rx, vy = (y1_ - cy_) / ry;
+ float det = ux * vy - uy * vx;
+ float theta1 = (det < 0 ? -1 : 1) *
+ (float)Math.acos((ux * vx + uy * vy) /
+ ((float)Math.sqrt(ux * ux + uy * uy) * (float)Math.sqrt(vx * vx + vy * vy)));
+ ux = (x1_ - cx_) / rx; uy = (y1_ - cy_) / ry;
+ vx = (-1 * x1_ - cx_) / rx; vy = (-1 * y1_ - cy_) / ry;
+ det = ux * vy - uy * vx;
+ float dtheta = (det < 0 ? -1 : 1) *
+ (float)Math.acos((ux * vx + uy * vy) /
+ ((float)Math.sqrt(ux * ux + uy * uy) * (float)Math.sqrt(vx * vx + vy * vy)));
+ dtheta = dtheta % (float)(2 * Math.PI);
+
+ if (fs == 0 && dtheta > 0) theta1 -= 2 * PI;
+ if (fs == 1 && dtheta < 0) theta1 += 2 * PI;
+
+ if (fa == 1 && dtheta < 0) dtheta = 2 * PI + dtheta;
+ else if (fa == 1 && dtheta > 0) dtheta = -1 * (2 * PI - dtheta);
+
+ // FIXME: integrate F.6.6
+ // FIXME: isn't quite ending where it should...
+
+ // F.6.3: Parameterization alternatives
+ float theta = theta1;
+ for(int j=0; j<NUMSTEPS; j++) {
+ float rasterx = rx * (float)Math.cos(theta) * (float)Math.cos(phi) -
+ ry * (float)Math.sin(theta) * (float)Math.sin(phi) + cx;
+ float rastery = rx * (float)Math.cos(theta) * (float)Math.sin(phi) +
+ ry * (float)Math.cos(phi) * (float)Math.sin(theta) + cy;
+ ret.add(rasterx, rastery);
+ theta += dtheta / NUMSTEPS;
+ }
+ }
+ }
+
+ class Bezier extends Curve {
+ float cx, cy;
+ public void addTo(Mesh ret) {
+ float ax = next.x - 3 * c2x + 3 * c1x - x;
+ float bx = 3 * c2x - 6 * c1x + 3 * x;
+ float cx = 3 * c1x - 3 * x;
+ float dx = x;
+ float ay = next.y - 3 * c2y + 3 * c1y - y;
+ float by = 3 * c2y - 6 * c1y + 3 * y;
+ float cy = 3 * c1y - 3 * y;
+ float dy = y;
+
+ float x0 = x;
+ float y0 = y;
+ float x1 = next.x;
+ float y1 = next.y;
+ float steps = (float)Math.sqrt( (x1-x0) * (x1-x0) + (y1-y0) * (y1-y0) );
+
+ //for(float t=0; t<1; t += 0.5) {
+ for(float t=0; t<1; t += 1/(steps/20)) {
+ float rx = ax * t * t * t + bx * t * t + cx * t + dx;
+ float ry = ay * t * t * t + by * t * t + cy * t + dy;
+ ret.add(rx,ry);
+ }
+ }
+ }
- public static VectorPath parseVectorPath(String s) {
- if (s == null) return null;
- PathTokenizer t = new PathTokenizer(s);
- VectorPath ret = new VectorPath();
+ class QuadBezier extends Curve {
+ float cx, cy, cx2, cy2;
+ public void addTo(Mesh ret) {
+ throw new Error("doesn't work yet");
+ /*
+ float bx = next.x - 2 * c1x + x;
+ float cx = 2 * c1x - 2 * x;
+ float dx = x;
+ float by = next.y - 2 * c1y + y;
+ float cy = 2 * c1y - 2 * y;
+ float dy = y;
+
+ float x0 = a.multiply_px(x, y);
+ float y0 = a.multiply_py(x, y);
+ float x1 = a.multiply_px(next.x, next.y);
+ float y1 = a.multiply_py(next.x, next.y);
+ float steps = (float)Math.sqrt( (x1-x0) * (x1-x0) + (y1-y0) * (y1-y0) );
+
+ for(float t=0; t<1; t += 1 / (steps/20)) {
+ float rx = bx * t * t + cx * t + dx;
+ float ry = by * t * t + cy * t + dy;
+ ret.add(a.multiply_px(rx, ry), a.multiply_py(rx, ry));
+ }
+ */
+ }
+ }
+
+ public Path(String s) {
+ //this.toString = s;
+ Tokenizer t = new Tokenizer(s);
char last_command = 'M';
boolean first = true;
while(t.hasMoreTokens()) {
char command = t.parseCommand();
+ if (first && command == 'm') command = 'M';
if (first && command != 'M') throw new RuntimeException("the first command of a path must be 'M'");
first = false;
boolean relative = Character.toLowerCase(command) == command;
command = Character.toLowerCase(command);
- ret.parseSingleCommandAndArguments(t, command, relative);
+ parseSingleCommandAndArguments(t, command, relative);
last_command = command;
}
- return ret;
}
+ public long boundingBox(Affine a) {
+ long hb = horizontalBounds(a);
+ long vb = verticalBounds(a);
+ return Encode.twoFloatsToLong(Math.abs(Encode.longToFloat1(hb) - Encode.longToFloat2(hb)),
+ Math.abs(Encode.longToFloat1(vb) - Encode.longToFloat2(vb)));
+ }
- // Affine //////////////////////////////////////////////////////////////////////////////
-
- /** an affine transform; all operations are destructive */
- public static final class Affine {
-
- // [ a b e ]
- // [ c d f ]
- // [ 0 0 1 ]
- public float a, b, c, d, e, f;
-
- Affine(float _a, float _b, float _c, float _d, float _e, float _f) { a = _a; b = _b; c = _c; d = _d; e = _e; f = _f; }
- public String toString() { return "[ " + a + ", " + b + ", " + c + ", " + d + ", " + e + ", " + f + " ]"; }
- public Affine copy() { return new Affine(a, b, c, d, e, f); }
- public static Affine identity() { return new Affine(1, 0, 0, 1, 0, 0); }
- public static Affine scale(float sx, float sy) { return new Affine(sx, 0, 0, sy, 0, 0); }
- public static Affine shear(float degrees) {
- return new Affine(1, 0, (float)Math.tan(degrees * (float)(Math.PI / 180.0)), 1, 0, 0); }
- public static Affine translate(float tx, float ty) { return new Affine(1, 0, 0, 1, tx, ty); }
- public static Affine flip(boolean horiz, boolean vert) { return new Affine(horiz ? -1 : 1, 0, 0, vert ? -1 : 1, 0, 0); }
- public float multiply_px(float x, float y) { return x * a + y * c + e; }
- public float multiply_py(float x, float y) { return x * b + y * d + f; }
- public boolean equalsIgnoringTranslation(Affine x) { return a == x.a && b == x.b && c == x.c && d == x.d; }
-
- public boolean equals(Object o) {
- if (!(o instanceof Affine)) return false;
- Affine x = (Affine)o;
- return a == x.a && b == x.b && c == x.c && d == x.d && e == x.e && f == x.f;
+ //#repeat width/height multiply_px/multiply_py horizontalBounds/verticalBounds
+ public long horizontalBounds(Affine a) {
+ // FIXME wrong
+ float min = Float.MAX_VALUE;
+ float max = Float.MIN_VALUE;
+ for(Curve c = head; c != null; c = c.next) {
+ min = Math.min(min, a.multiply_px(c.x, c.y));
+ max = Math.max(max, a.multiply_px(c.x, c.y));
}
-
- public static Affine rotate(float degrees) {
- float s = (float)Math.sin(degrees * (float)(Math.PI / 180.0));
- float c = (float)Math.cos(degrees * (float)(Math.PI / 180.0));
- return new Affine(c, s, -s, c, 0, 0);
- }
-
- /** this = this * a */
- public Affine multiply(Affine A) {
- float _a = this.a * A.a + this.b * A.c;
- float _b = this.a * A.b + this.b * A.d;
- float _c = this.c * A.a + this.d * A.c;
- float _d = this.c * A.b + this.d * A.d;
- float _e = this.e * A.a + this.f * A.c + A.e;
- float _f = this.e * A.b + this.f * A.d + A.f;
- a = _a; b = _b; c = _c; d = _d; e = _e; f = _f;
- return this;
- }
-
- public void invert() {
- float det = 1 / (a * d - b * c);
- float _a = d * det;
- float _b = -1 * b * det;
- float _c = -1 * c * det;
- float _d = a * det;
- float _e = -1 * e * a - f * c;
- float _f = -1 * e * b - f * d;
- a = _a; b = _b; c = _c; d = _d; e = _e; f = _f;
- }
+ return Encode.twoFloatsToLong(max, min);
}
-
-
- // PathTokenizer //////////////////////////////////////////////////////////////////////////////
-
- public static Affine parseTransform(String t) {
- if (t == null) return null;
- t = t.trim();
- Affine ret = VectorGraphics.Affine.identity();
- while (t.length() > 0) {
- if (t.startsWith("skewX(")) {
- // FIXME
-
- } else if (t.startsWith("shear(")) {
- // FIXME: nonstandard; remove this
- ret.multiply(VectorGraphics.Affine.shear(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(')')))));
-
- } else if (t.startsWith("skewY(")) {
- // FIXME
-
- } else if (t.startsWith("rotate(")) {
- String sub = t.substring(t.indexOf('(') + 1, t.indexOf(')'));
- if (sub.indexOf(',') != -1) {
- float angle = Float.parseFloat(sub.substring(0, sub.indexOf(',')));
- sub = sub.substring(sub.indexOf(',') + 1);
- float cx = Float.parseFloat(sub.substring(0, sub.indexOf(',')));
- sub = sub.substring(sub.indexOf(',') + 1);
- float cy = Float.parseFloat(sub);
- ret.multiply(VectorGraphics.Affine.translate(cx, cy));
- ret.multiply(VectorGraphics.Affine.rotate(angle));
- ret.multiply(VectorGraphics.Affine.translate(-1 * cx, -1 * cy));
- } else {
- ret.multiply(VectorGraphics.Affine.rotate(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(')')))));
- }
-
- } else if (t.startsWith("translate(")) {
- String sub = t.substring(t.indexOf('(') + 1, t.indexOf(')'));
- if (sub.indexOf(',') > -1) {
- ret.multiply(VectorGraphics.Affine.translate(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(','))),
- Float.parseFloat(t.substring(t.indexOf(',') + 1, t.indexOf(')')))));
- } else {
- ret.multiply(VectorGraphics.Affine.translate(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(','))), 0));
- }
-
- } else if (t.startsWith("flip(")) {
- String which = t.substring(t.indexOf('(') + 1, t.indexOf(')'));
- ret.multiply(VectorGraphics.Affine.flip(which.equals("horizontal"), which.equals("vertical")));
-
- } else if (t.startsWith("scale(")) {
- String sub = t.substring(t.indexOf('(') + 1, t.indexOf(')'));
- if (sub.indexOf(',') > -1) {
- ret.multiply(VectorGraphics.Affine.scale(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(','))),
- Float.parseFloat(t.substring(t.indexOf(',') + 1, t.indexOf(')')))));
- } else {
- ret.multiply(VectorGraphics.Affine.scale(Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(','))),
- Float.parseFloat(t.substring(t.indexOf('(') + 1, t.indexOf(',')))));
- }
-
- } else if (t.startsWith("matrix(")) {
- // FIXME: is this mapped right?
- float d[] = new float[6];
- StringTokenizer st = new StringTokenizer(t, ",", false);
- for(int i=0; i<6; i++)
- d[i] = Float.parseFloat(st.nextToken());
- ret.multiply(new VectorGraphics.Affine(d[0], d[1], d[2], d[3], d[4], d[5]));
+ //#end
+
+ public long transform(Affine a, boolean forReal) { return transform(a, forReal, true); }
+ public long transform(Affine a, boolean forReal, boolean widthheight) {
+ float minx = Integer.MAX_VALUE; float miny = Integer.MAX_VALUE;
+ float maxx = Integer.MIN_VALUE; float maxy = Integer.MIN_VALUE;
+ for(Curve c = head; c != null; c = c.next) {
+ if (c instanceof Arc) { /* FIXME!!! WRONG!!!! */ continue; }
+ float x = a.multiply_px(c.x, c.y); if (x>maxx) maxx = x; if (x<minx) minx = x;
+ float y = a.multiply_py(c.x, c.y); if (y>maxy) maxy = y; if (y<miny) miny = y;
+ float c1x = a.multiply_px(c.c1x, c.c1y); if (c1x>maxx) maxx = c1x; if (c1x<minx) minx = c1x;
+ float c1y = a.multiply_py(c.c1x, c.c1y); if (c1y>maxy) maxy = c1y; if (c1y<miny) miny = c1y;
+ float c2x = a.multiply_px(c.c2x, c.c2y); if (c2x>maxx) maxx = c2x; if (c2x<minx) minx = c2x;
+ float c2y = a.multiply_py(c.c2x, c.c2y); if (c2y>maxy) maxy = c2y; if (c2y<miny) miny = c2y;
+ if (forReal) {
+ c.x = x; c.y = y;
+ c.c1x = c1x; c.c1y = c1y;
+ c.c2x = c2x; c.c2y = c2y;
}
- t = t.substring(t.indexOf(')') + 1).trim();
}
- return ret;
+ if (widthheight) return ((((long)Float.floatToIntBits(maxx - minx)) << 32) | ((long)Float.floatToIntBits(maxy - miny)));
+ else return ((((long)Float.floatToIntBits(minx)) << 32) | ((long)Float.floatToIntBits(miny)));
}
-
- public static final float PX_PER_INCH = 72;
- public static final float INCHES_PER_CM = (float)0.3937;
- public static final float INCHES_PER_MM = INCHES_PER_CM / 10;
- public static class PathTokenizer {
+ public void alignToOrigin() {
+ float minx = Integer.MAX_VALUE; float miny = Integer.MAX_VALUE;
+ for(Curve c = head; c != null; c = c.next) { if (c.x < minx) minx = c.x; if (c.y < miny) miny = c.y; }
+ for(Curve c = head; c != null; c = c.next) {
+ c.x -= minx; c.y -= miny;
+ if (c instanceof Arc) continue;
+ c.c1x -= minx; c.c2x -= minx; c.c1y -= miny; c.c2y -= miny;
+ }
+ }
+
+ public static class Tokenizer {
// FIXME: check array bounds exception for improperly terminated string
String s;
int i = 0;
char lastCommand = 'M';
- public PathTokenizer(String s) { this.s = s; }
+ public Tokenizer(String s) { this.s = s; }
+
+ public static Path parse(String s) {
+ if (s == null) return null;
+ Tokenizer t = new Tokenizer(s);
+ Path ret = new Path(s);
+ return ret;/*
+ char last_command = 'M';
+ boolean first = true;
+ while(t.hasMoreTokens()) {
+ char command = t.parseCommand();
+ if (first && command != 'M') throw new RuntimeException("the first command of a path must be 'M'");
+ first = false;
+ boolean relative = Character.toLowerCase(command) == command;
+ command = Character.toLowerCase(command);
+ ret.parseSingleCommandAndArguments(t, command, relative);
+ last_command = command;
+ }
+ return ret;*/
+ }
private void consumeWhitespace() {
while(i < s.length() && (Character.isWhitespace(s.charAt(i)))) i++;
if (i < s.length() && s.charAt(i) == ',') i++;
throw new RuntimeException("didn't expect character \"" + c + "\" in a numeric constant");
}
}
- if (start == i) throw new RuntimeException("FIXME");
- return Float.parseFloat(s.substring(start, i)) * multiplier;
+ //if (start == i) throw new RuntimeException("FIXME");
+ if (start == i) return (float)0.0;
+ try {
+ return Float.parseFloat(s.substring(start, i)) * multiplier;
+ } catch (NumberFormatException nfe) {
+ Log.warn(Path.class, "offending string was \"" + s.substring(start, i) + "\"");
+ throw nfe;
+ }
}
}
-
- // Abstract Path //////////////////////////////////////////////////////////////////////////////
-
- /** an abstract path; may contain splines and arcs */
- public static class VectorPath {
-
- // the number of vertices on this path
- int numvertices = 0;
-
- // the vertices of the path
- float[] x = new float[DEFAULT_PATHLEN];
- float[] y = new float[DEFAULT_PATHLEN];
-
- // the type of each edge; type[i] is the type of the edge from x[i],y[i] to x[i+1],y[i+1]
- byte[] type = new byte[DEFAULT_PATHLEN];
-
- // bezier control points
- float[] c1x = new float[DEFAULT_PATHLEN]; // or rx (arcto)
- float[] c1y = new float[DEFAULT_PATHLEN]; // or ry (arcto)
- float[] c2x = new float[DEFAULT_PATHLEN]; // or x-axis-rotation (arcto)
- float[] c2y = new float[DEFAULT_PATHLEN]; // or large-arc << 1 | sweep (arcto)
-
- boolean closed = false;
-
- static final byte TYPE_MOVETO = 0;
- static final byte TYPE_LINETO = 1;
- static final byte TYPE_ARCTO = 2;
- static final byte TYPE_CUBIC = 3;
- static final byte TYPE_QUADRADIC = 4;
-
- /** Creates a concrete vector path transformed through the given matrix. */
- public RasterPath realize(Affine a) {
-
- RasterPath ret = new RasterPath();
- int NUMSTEPS = 5; // FIXME
- ret.numvertices = 1;
- ret.x[0] = (int)Math.round(a.multiply_px(x[0], y[0]));
- ret.y[0] = (int)Math.round(a.multiply_py(x[0], y[0]));
-
- for(int i=1; i<numvertices; i++) {
- if (type[i] == TYPE_LINETO) {
- float rx = x[i];
- float ry = y[i];
- ret.x[ret.numvertices] = (int)Math.round(a.multiply_px(rx, ry));
- ret.y[ret.numvertices] = (int)Math.round(a.multiply_py(rx, ry));
- ret.edges[ret.numedges++] = ret.numvertices - 1; ret.numvertices++;
-
- } else if (type[i] == TYPE_MOVETO) {
- float rx = x[i];
- float ry = y[i];
- ret.x[ret.numvertices] = (int)Math.round(a.multiply_px(rx, ry));
- ret.y[ret.numvertices] = (int)Math.round(a.multiply_py(rx, ry));
- ret.numvertices++;
-
- } else if (type[i] == TYPE_ARCTO) {
- float rx = c1x[i];
- float ry = c1y[i];
- float phi = c2x[i];
- float fa = ((int)c2y[i]) >> 1;
- float fs = ((int)c2y[i]) & 1;
- float x1 = x[i];
- float y1 = y[i];
- float x2 = x[i+1];
- float y2 = y[i+1];
-
- // F.6.5: given x1,y1,x2,y2,fa,fs, compute cx,cy,theta1,dtheta
- float x1_ = (float)Math.cos(phi) * (x1 - x2) / 2 + (float)Math.sin(phi) * (y1 - y2) / 2;
- float y1_ = -1 * (float)Math.sin(phi) * (x1 - x2) / 2 + (float)Math.cos(phi) * (y1 - y2) / 2;
- float tmp = (float)Math.sqrt((rx * rx * ry * ry - rx * rx * y1_ * y1_ - ry * ry * x1_ * x1_) /
- (rx * rx * y1_ * y1_ + ry * ry * x1_ * x1_));
- float cx_ = (fa == fs ? -1 : 1) * tmp * (rx * y1_ / ry);
- float cy_ = (fa == fs ? -1 : 1) * -1 * tmp * (ry * x1_ / rx);
- float cx = (float)Math.cos(phi) * cx_ - (float)Math.sin(phi) * cy_ + (x1 + x2) / 2;
- float cy = (float)Math.sin(phi) * cx_ + (float)Math.cos(phi) * cy_ + (y1 + y2) / 2;
-
- // F.6.4 Conversion from center to endpoint parameterization
- float ux = 1, uy = 0, vx = (x1_ - cx_) / rx, vy = (y1_ - cy_) / ry;
- float det = ux * vy - uy * vx;
- float theta1 = (det < 0 ? -1 : 1) *
- (float)Math.acos((ux * vx + uy * vy) /
- ((float)Math.sqrt(ux * ux + uy * uy) * (float)Math.sqrt(vx * vx + vy * vy)));
- ux = (x1_ - cx_) / rx; uy = (y1_ - cy_) / ry;
- vx = (-1 * x1_ - cx_) / rx; vy = (-1 * y1_ - cy_) / ry;
- det = ux * vy - uy * vx;
- float dtheta = (det < 0 ? -1 : 1) *
- (float)Math.acos((ux * vx + uy * vy) /
- ((float)Math.sqrt(ux * ux + uy * uy) * (float)Math.sqrt(vx * vx + vy * vy)));
- dtheta = dtheta % (float)(2 * Math.PI);
-
- if (fs == 0 && dtheta > 0) theta1 -= 2 * PI;
- if (fs == 1 && dtheta < 0) theta1 += 2 * PI;
-
- if (fa == 1 && dtheta < 0) dtheta = 2 * PI + dtheta;
- else if (fa == 1 && dtheta > 0) dtheta = -1 * (2 * PI - dtheta);
-
- // FIXME: integrate F.6.6
- // FIXME: isn't quite ending where it should...
-
- // F.6.3: Parameterization alternatives
- float theta = theta1;
- for(int j=0; j<NUMSTEPS; j++) {
- float rasterx = rx * (float)Math.cos(theta) * (float)Math.cos(phi) -
- ry * (float)Math.sin(theta) * (float)Math.sin(phi) + cx;
- float rastery = rx * (float)Math.cos(theta) * (float)Math.sin(phi) +
- ry * (float)Math.cos(phi) * (float)Math.sin(theta) + cy;
- ret.x[ret.numvertices] = (int)Math.round(a.multiply_px(rasterx, rastery));
- ret.y[ret.numvertices] = (int)Math.round(a.multiply_py(rasterx, rastery));
- ret.edges[ret.numedges++] = ret.numvertices - 1; ret.numvertices++;
- theta += dtheta / NUMSTEPS;
- }
-
- } else if (type[i] == TYPE_CUBIC) {
-
- float ax = x[i+1] - 3 * c2x[i] + 3 * c1x[i] - x[i];
- float bx = 3 * c2x[i] - 6 * c1x[i] + 3 * x[i];
- float cx = 3 * c1x[i] - 3 * x[i];
- float dx = x[i];
- float ay = y[i+1] - 3 * c2y[i] + 3 * c1y[i] - y[i];
- float by = 3 * c2y[i] - 6 * c1y[i] + 3 * y[i];
- float cy = 3 * c1y[i] - 3 * y[i];
- float dy = y[i];
-
- for(float t=0; t<1; t += 1 / (float)NUMSTEPS) {
- float rx = ax * t * t * t + bx * t * t + cx * t + dx;
- float ry = ay * t * t * t + by * t * t + cy * t + dy;
- ret.x[ret.numvertices] = (int)Math.round(a.multiply_px(rx, ry));
- ret.y[ret.numvertices] = (int)Math.round(a.multiply_py(rx, ry));
- ret.edges[ret.numedges++] = ret.numvertices - 1; ret.numvertices++;
- }
-
-
- } else if (type[i] == TYPE_QUADRADIC) {
-
- float bx = x[i+1] - 2 * c1x[i] + x[i];
- float cx = 2 * c1x[i] - 2 * x[i];
- float dx = x[i];
- float by = y[i+1] - 2 * c1y[i] + y[i];
- float cy = 2 * c1y[i] - 2 * y[i];
- float dy = y[i];
-
- for(float t=0; t<1; t += 1 / (float)NUMSTEPS) {
- float rx = bx * t * t + cx * t + dx;
- float ry = by * t * t + cy * t + dy;
- ret.x[ret.numvertices] = (int)Math.round(a.multiply_px(rx, ry));
- ret.y[ret.numvertices] = (int)Math.round(a.multiply_py(rx, ry));
- ret.edges[ret.numedges++] = ret.numvertices - 1; ret.numvertices++;
- }
-
- }
-
- }
-
- if (ret.numedges > 0) ret.sort(0, ret.numedges - 1, false);
- return ret;
- }
-
- protected void parseSingleCommandAndArguments(PathTokenizer t, char command, boolean relative) {
- if (numvertices == 0 && command != 'm') throw new RuntimeException("first command MUST be an 'm'");
- if (numvertices > x.length - 2) {
- float[] new_x = new float[x.length * 2]; System.arraycopy(x, 0, new_x, 0, x.length); x = new_x;
- float[] new_y = new float[y.length * 2]; System.arraycopy(y, 0, new_y, 0, y.length); y = new_y;
- }
- switch(command) {
+ protected void parseSingleCommandAndArguments(Tokenizer t, char command, boolean relative) {
+ if (tail==null && command!='m') throw new RuntimeException("first command MUST be an 'm', not a " + command);
+ switch(command) {
case 'z': {
- int where;
- type[numvertices-1] = TYPE_LINETO;
- for(where = numvertices - 1; where > 0; where--)
- if (type[where - 1] == TYPE_MOVETO) break;
- x[numvertices] = x[where];
- y[numvertices] = y[where];
- numvertices++;
+ Curve c;
+ for(c = tail.prev; c != null && !(c instanceof Move); c = c.prev);
+ Line ret = new Line();
+ ret.x = c.x;
+ ret.y = c.y;
+ add(ret);
+ Move mov = new Move();
+ mov.x = ret.x;
+ mov.y = ret.y;
+ add(mov);
closed = true;
+ // FIXME: actually, we should search back to the last 'z' or 'm', not just 'm'
break;
}
case 'm': {
- if (numvertices > 0) type[numvertices-1] = TYPE_MOVETO;
- x[numvertices] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- y[numvertices] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- numvertices++;
+ // feature: collapse consecutive movetos
+ Move ret = new Move();
+ ret.x = t.parseFloat() + (relative ? tail.y : 0);
+ ret.y = t.parseFloat() + (relative ? tail.y : 0);
+ add(ret);
break;
}
case 'l': case 'h': case 'v': {
- type[numvertices-1] = TYPE_LINETO;
float first = t.parseFloat(), second;
- if (command == 'h') {
- second = relative ? 0 : y[numvertices - 1];
- } else if (command == 'v') {
- second = first; first = relative ? 0 : x[numvertices - 1];
- } else {
- second = t.parseFloat();
- }
- x[numvertices] = first + (relative ? x[numvertices - 1] : 0);
- y[numvertices] = second + (relative ? y[numvertices - 1] : 0);
- numvertices++;
+ if (command == 'h') second = relative ? 0 : tail.y;
+ else if (command == 'v') { second = first; first = relative ? 0 : tail.x; }
+ else second = t.parseFloat();
+ Line ret = new Line();
+ ret.x = first + (relative ? tail.x : 0);
+ ret.y = second + (relative ? tail.y : 0);
+ add(ret);
break;
}
case 'a': {
- type[numvertices-1] = TYPE_ARCTO;
- c1x[numvertices-1] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- c1y[numvertices-1] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- c2x[numvertices-1] = (t.parseFloat() / 360) * 2 * PI;
- c2y[numvertices-1] = (((int)t.parseFloat()) << 1) | (int)t.parseFloat();
- x[numvertices] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- y[numvertices] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- numvertices++;
+ Arc ret = new Arc();
+ ret.c1x = t.parseFloat() + (relative ? tail.x : 0);
+ ret.c1y = t.parseFloat() + (relative ? tail.y : 0);
+ ret.c2x = (t.parseFloat() / 360) * 2 * PI;
+ ret.c2y = t.parseFloat();
+ ret.x = t.parseFloat() + (relative ? tail.x : 0);
+ ret.y = t.parseFloat() + (relative ? tail.y : 0);
+ add(ret);
break;
}
case 's': case 'c': {
- type[numvertices-1] = TYPE_CUBIC;
+ Bezier ret = new Bezier();
if (command == 'c') {
- c1x[numvertices-1] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- c1y[numvertices-1] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- } else if (numvertices > 1 && type[numvertices-2] == TYPE_CUBIC) {
- c1x[numvertices-1] = 2 * x[numvertices - 1] - c2x[numvertices-2];
- c1y[numvertices-1] = 2 * y[numvertices - 1] - c2y[numvertices-2];
+ tail.c1x = t.parseFloat() + (relative ? tail.x : 0);
+ tail.c1y = t.parseFloat() + (relative ? tail.y : 0);
+ } else if (head != null && tail instanceof Bezier) {
+ tail.c1x = 2 * tail.x-((Bezier)tail).c2x;
+ tail.c1y = 2 * tail.y-((Bezier)tail).c2x;
} else {
- c1x[numvertices-1] = x[numvertices-1];
- c1y[numvertices-1] = y[numvertices-1];
+ tail.c1x = tail.x;
+ tail.c1y = tail.y;
}
- c2x[numvertices-1] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- c2y[numvertices-1] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- x[numvertices] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- y[numvertices] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- numvertices++;
+ tail.c2x = t.parseFloat() + (relative ? tail.x : 0);
+ tail.c2y = t.parseFloat() + (relative ? tail.y : 0);
+ ret.x = t.parseFloat() + (relative ? tail.x : 0);
+ ret.y = t.parseFloat() + (relative ? tail.y : 0);
+ add(ret);
break;
}
case 't': case 'q': {
- type[numvertices-1] = TYPE_QUADRADIC;
+ QuadBezier ret = new QuadBezier();
if (command == 'q') {
- c1x[numvertices-1] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- c1y[numvertices-1] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- } else if (numvertices > 1 && type[numvertices-2] == TYPE_QUADRADIC) {
- c1x[numvertices-1] = 2 * x[numvertices - 1] - c1x[numvertices-2];
- c1y[numvertices-1] = 2 * y[numvertices - 1] - c1y[numvertices-2];
+ tail.c1x = t.parseFloat() + (relative ? tail.x : 0);
+ tail.c1y = t.parseFloat() + (relative ? tail.y : 0);
+ } else if (head != null && tail instanceof QuadBezier) {
+ tail.c1x = 2 * tail.x-((QuadBezier)tail).c1x;
+ tail.c1y = 2 * tail.y-((QuadBezier)tail).c1y;
} else {
- c1x[numvertices-1] = x[numvertices-1];
- c1y[numvertices-1] = y[numvertices-1];
+ tail.c1x = tail.x;
+ tail.c1y = tail.y;
}
- x[numvertices] = t.parseFloat() + (relative ? x[numvertices - 1] : 0);
- y[numvertices] = t.parseFloat() + (relative ? y[numvertices - 1] : 0);
- numvertices++;
+ ret.x = t.parseFloat() + (relative ? tail.x : 0);
+ ret.y = t.parseFloat() + (relative ? tail.y : 0);
+ add(ret);
break;
}
default:
- // FIXME
- }
-
- /*
- // invariant: after this loop, no two lines intersect other than at a vertex
- // FIXME: cleanup
- int index = numvertices - 2;
- for(int i=0; i<Math.min(numvertices - 3, index); i++) {
- for(int j = index; j < numvertices - 1; j++) {
-
- // I'm not sure how to deal with vertical lines...
- if (x[i+1] == x[i] || x[j+1] == x[j]) continue;
-
- float islope = (y[i+1] - y[i]) / (x[i+1] - x[i]);
- float jslope = (y[j+1] - y[j]) / (x[j+1] - x[j]);
- if (islope == jslope) continue; // parallel lines can't intersect
-
- float _x = (islope * x[i] - jslope * x[j] + y[j] - y[i]) / (islope - jslope);
- float _y = islope * (_x - x[i]) + y[i];
-
- if (_x > Math.min(x[i+1], x[i]) && _x < Math.max(x[i+1], x[i]) &&
- _x > Math.min(x[j+1], x[j]) && _x < Math.max(x[j+1], x[j])) {
- // FIXME: something's not right in here. See if we can do without fracturing line 'i'.
- for(int k = ++numvertices; k>i; k--) { x[k] = x[k - 1]; y[k] = y[k - 1]; }
- x[i+1] = _x;
- y[i+1] = _y;
- x[numvertices] = x[numvertices - 1]; x[numvertices - 1] = _x;
- y[numvertices] = y[numvertices - 1]; y[numvertices - 1] = _y;
- edges[numedges++] = numvertices - 1; numvertices++;
- index++;
- break; // actually 'continue' the outermost loop
- }
- }
- }
- */
-
- }
- }
-
-
-
-
- // Rasterized Vector Path //////////////////////////////////////////////////////////////////////////////
-
- /** a vector path */
- public static class RasterPath {
-
- // the vertices of this path
- int[] x = new int[DEFAULT_PATHLEN];
- int[] y = new int[DEFAULT_PATHLEN];
- int numvertices = 0;
-
- /**
- * A list of the vertices on this path which *start* an *edge* (rather than a moveto), sorted by increasing y.
- * example: x[edges[1]],y[edges[1]] - x[edges[i]+1],y[edges[i]+1] is the second-topmost edge
- * note that if x[i],y[i] - x[i+1],y[i+1] is a MOVETO, then no element in edges will be equal to i
- */
- int[] edges = new int[DEFAULT_PATHLEN];
- int numedges = 0;
-
- /** translate a rasterized path */
- public void translate(int dx, int dy) { for(int i=0; i<numvertices; i++) { x[i] += dx; y[i] += dy; } }
-
- /** simple quicksort, from http://sourceforge.net/snippet/detail.php?type=snippet&id=100240 */
- int sort(int left, int right, boolean partition) {
- if (partition) {
- int i, j, middle;
- middle = (left + right) / 2;
- int s = edges[right]; edges[right] = edges[middle]; edges[middle] = s;
- for (i = left - 1, j = right; ; ) {
- while (y[edges[++i]] < y[edges[right]]);
- while (j > left && y[edges[--j]] > y[edges[right]]);
- if (i >= j) break;
- s = edges[i]; edges[i] = edges[j]; edges[j] = s;
- }
- s = edges[right]; edges[right] = edges[i]; edges[i] = s;
- return i;
- } else {
- if (left >= right) return 0;
- int p = sort(left, right, true);
- sort(left, p - 1, false);
- sort(p + 1, right, false);
- return 0;
- }
- }
-
- /** finds the x value at which the line intercepts the line y=_y */
- private int intercept(int i, float _y, boolean includeTop, boolean includeBottom) {
- if (includeTop ? (_y < Math.min(y[i], y[i+1])) : (_y <= Math.min(y[i], y[i+1])))
- return Integer.MIN_VALUE;
- if (includeBottom ? (_y > Math.max(y[i], y[i+1])) : (_y >= Math.max(y[i], y[i+1])))
- return Integer.MIN_VALUE;
- return (int)Math.round((((float)(x[i + 1] - x[i])) /
- ((float)(y[i + 1] - y[i])) ) * ((float)(_y - y[i])) + x[i]);
- }
-
- /** fill the interior of the path */
- public void fill(PixelBuffer buf, Paint paint) {
- if (numedges == 0) return;
- int y0 = y[edges[0]], y1 = y0;
- boolean useEvenOdd = false;
-
- // we iterate over all endpoints in increasing y-coordinate order
- for(int index = 1; index<numedges; index++) {
- int count = 0;
-
- // we now examine the horizontal band between y=y0 and y=y1
- y0 = y1;
- y1 = y[edges[index]];
- if (y0 == y1) continue;
-
- // within this band, we iterate over all edges
- int x0 = Integer.MIN_VALUE;
- int leftSegment = -1;
- while(true) {
- int x1 = Integer.MAX_VALUE;
- int rightSegment = Integer.MAX_VALUE;
- for(int i=0; i<numedges; i++) {
- if (y[edges[i]] == y[edges[i]+1]) continue; // ignore horizontal lines; they are irrelevant.
- // we order the segments by the x-coordinate of their midpoint;
- // since segments cannot intersect, this is a well-ordering
- int i0 = intercept(edges[i], y0, true, false);
- int i1 = intercept(edges[i], y1, false, true);
- if (i0 == Integer.MIN_VALUE || i1 == Integer.MIN_VALUE) continue;
- int midpoint = i0 + i1;
- if (midpoint < x0) continue;
- if (midpoint == x0 && i <= leftSegment) continue;
- if (midpoint > x1) continue;
- if (midpoint == x1 && i >= rightSegment) continue;
- rightSegment = i;
- x1 = midpoint;
- }
- if (leftSegment == rightSegment || rightSegment == Integer.MAX_VALUE) break;
- if (leftSegment != -1)
- if ((useEvenOdd && count % 2 != 0) || (!useEvenOdd && count != 0))
- paint.fillTrapezoid(intercept(edges[leftSegment], y0, true, true),
- intercept(edges[rightSegment], y0, true, true), y0,
- intercept(edges[leftSegment], y1, true, true),
- intercept(edges[rightSegment], y1, true, true), y1,
- buf);
- if (useEvenOdd) count++;
- else count += (y[edges[rightSegment]] < y[edges[rightSegment]+1]) ? -1 : 1;
- leftSegment = rightSegment; x0 = x1;
- }
- }
- }
-
- /** stroke the outline of the path */
- public void stroke(PixelBuffer buf, int width, int color) { stroke(buf, width, color, null, 0, 0); }
- public void stroke(PixelBuffer buf, int width, int color, String dashArray, int dashOffset, float segLength) {
-
- if (dashArray == null) {
- for(int i=0; i<numedges; i++)
- buf.drawLine((int)x[edges[i]],
- (int)y[edges[i]], (int)x[edges[i]+1], (int)y[edges[i]+1], width, color, false);
- return;
- }
-
- float ratio = 1;
- if (segLength > 0) {
- float actualLength = 0;
- for(int i=0; i<numvertices; i++) {
- // skip over MOVETOs -- they do not contribute to path length
- if (x[i] == x[i+1] && y[i] == y[i+1]) continue;
- if (x[i+1] == x[i+2] && y[i+1] == y[i+2]) continue;
- int x1 = x[i];
- int x2 = x[i + 1];
- int y1 = y[i];
- int y2 = y[i + 1];
- actualLength += java.lang.Math.sqrt((x2 - x1) * (x2 - x1) + (y2 - y1) * (y2 - y1));
- }
- ratio = actualLength / segLength;
- }
- PathTokenizer pt = new PathTokenizer(dashArray);
- Vector v = new Vector();
- while (pt.hasMoreTokens()) v.addElement(new Float(pt.parseFloat()));
- float[] dashes = new float[v.size() % 2 == 0 ? v.size() : 2 * v.size()];
- for(int i=0; i<dashes.length; i++) dashes[i] = ((Float)v.elementAt(i % v.size())).floatValue();
- int dashpos = dashOffset;
- boolean on = dashpos % 2 == 0;
- for(int i=0; i<numvertices; i++) {
- // skip over MOVETOs -- they do not contribute to path length
- if (x[i] == x[i+1] && y[i] == y[i+1]) continue;
- if (x[i+1] == x[i+2] && y[i+1] == y[i+2]) continue;
- int x1 = (int)x[i];
- int x2 = (int)x[i + 1];
- int y1 = (int)y[i];
- int y2 = (int)y[i + 1];
- float segmentLength = (float)java.lang.Math.sqrt((x2 - x1) * (x2 - x1) + (y2 - y1) * (y2 - y1));
- int _x1 = x1, _y1 = y1;
- float pos = 0;
- do {
- pos = Math.min(segmentLength, pos + dashes[dashpos] * ratio);
- if (pos != segmentLength) dashpos = (dashpos + 1) % dashes.length;
- int _x2 = (int)((x2 * pos + x1 * (segmentLength - pos)) / segmentLength);
- int _y2 = (int)((y2 * pos + y1 * (segmentLength - pos)) / segmentLength);
- if (on) buf.drawLine(_x1, _y1, _x2, _y2, width, color, false);
- on = !on;
- _x1 = _x2; _y1 = _y2;
- } while(pos < segmentLength);
- }
- }
-
- // FEATURE: make this faster and cache it; also deal with negative coordinates
- public int boundingBoxWidth() {
- int ret = 0;
- for(int i=0; i<numvertices; i++) ret = Math.max(ret, x[i]);
- return ret;
}
- // FEATURE: make this faster and cache it; also deal with negative coordinates
- public int boundingBoxHeight() {
- int ret = 0;
- for(int i=0; i<numvertices; i++) ret = Math.max(ret, y[i]);
- return ret;
- }
- }
-
-
- // Paint //////////////////////////////////////////////////////////////////////////////
-
- public static interface Paint {
- public abstract void
- fillTrapezoid(int tx1, int tx2, int ty1, int tx3, int tx4, int ty2, PixelBuffer buf);
- }
-
- public static class SingleColorPaint implements Paint {
- int color;
- public SingleColorPaint(int color) { this.color = color; }
- public void fillTrapezoid(int x1, int x2, int y1, int x3, int x4, int y2, PixelBuffer buf) {
- buf.fillTrapezoid(x1, x2, y1, x3, x4, y2, color);
- }
}
}
-
-
-
-
-
-
-
-
-
- /*
- public static abstract class GradientPaint extends Paint {
- public GradientPaint(boolean reflect, boolean repeat, Affine gradientTransform,
- int[] stop_colors, float[] stop_offsets) {
- this.reflect = reflect; this.repeat = repeat;
- this.gradientTransform = gradientTransform;
- this.stop_colors = stop_colors;
- this.stop_offsets = stop_offsets;
- }
- Affine gradientTransform = Affine.identity();
- boolean useBoundingBox = false; // FIXME not supported
- boolean patternUseBoundingBox = false; // FIXME not supported
-
- // it's invalid for both of these to be true
- boolean reflect = false; // FIXME not supported
- boolean repeat = false; // FIXME not supported
- int[] stop_colors;
- float[] stop_offsets;
-
- public void fillTrapezoid(float tx1, float tx2, float ty1, float tx3, float tx4, float ty2, PixelBuffer buf) {
- Affine a = buf.a;
- Affine inverse = a.copy().invert();
- float slope1 = (tx3 - tx1) / (ty2 - ty1);
- float slope2 = (tx4 - tx2) / (ty2 - ty1);
- for(float y=ty1; y<ty2; y++) {
- float _x1 = (y - ty1) * slope1 + tx1;
- float _x2 = (y - ty1) * slope2 + tx2;
- if (_x1 > _x2) { float _x0 = _x1; _x1 = _x2; _x2 = _x0; }
-
- for(float x=_x1; x<_x2; x++) {
-
- float distance = isLinear ?
- // length of projection of <x,y> onto the gradient vector == {<x,y> \dot {grad \over |grad|}}
- (x * (x2 - x1) + y * (y2 - y1)) / (float)Math.sqrt((x2 - x1) * (x2 - x1) + (y2 - y1) * (y2 - y1)) :
-
- // radial form is simple! FIXME, not quite right
- (float)Math.sqrt((x - cx) * (x - cx) + (y - cy) * (y - cy));
-
- // FIXME: offsets are 0..1, not 0..length(gradient)
- int i = 0; for(; i<stop_offsets.length; i++) if (distance < stop_offsets[i]) break;
-
- // FIXME: handle points beyond the bounds
- if (i < 0 || i >= stop_offsets.length) continue;
-
- // gradate from offsets[i - 1] to offsets[i]
- float percentage = ((distance - stop_offsets[i - 1]) / (stop_offsets[i] - stop_offsets[i - 1]));
-
- int a = (int)((((stop_colors[i] >> 24) & 0xff) - ((stop_colors[i - 1] >> 24) & 0xff)) * percentage) +
- ((stop_colors[i - 1] >> 24) & 0xff);
- int r = (int)((((stop_colors[i] >> 16) & 0xff) - ((stop_colors[i - 1] >> 16) & 0xff)) * percentage) +
- ((stop_colors[i - 1] >> 16) & 0xff);
- int g = (int)((((stop_colors[i] >> 8) & 0xff) - ((stop_colors[i - 1] >> 8) & 0xff)) * percentage) +
- ((stop_colors[i - 1] >> 8) & 0xff);
- int b = (int)((((stop_colors[i] >> 0) & 0xff) - ((stop_colors[i - 1] >> 0) & 0xff)) * percentage) +
- ((stop_colors[i - 1] >> 0) & 0xff);
- int argb = (a << 24) | (r << 16) | (g << 8) | b;
- buf.drawPoint((int)x, (int)Math.floor(y), argb);
- }
- }
- }
- }
-
- public static class LinearGradientPaint extends GradientPaint {
- public LinearGradientPaint(float x1, float y1, float x2, float y2, boolean reflect, boolean repeat,
- Affine gradientTransform, int[] stop_colors, float[] stop_offsets) {
- super(reflect, repeat, gradientTransform, stop_colors, stop_offsets);
- this.x1 = x1; this.x2 = x2; this.y1 = y1; this.y2 = y2;
- }
- float x1 = 0, y1 = 0, x2 = 300, y2 = 300;
- }
-
- public static class RadialGradientPaint extends GradientPaint {
- public RadialGradientPaint(float cx, float cy, float fx, float fy, float r, boolean reflect, boolean repeat,
- Affine gradientTransform, int[] stop_colors, float[] stop_offsets) {
- super(reflect, repeat, gradientTransform, stop_colors, stop_offsets);
- this.cx = cx; this.cy = cy; this.fx = fx; this.fy = fy; this.r = r;
- }
-
- float cx, cy, r, fx, fy;
-
- }
- */
-