Makefile

   1 ############################################################################
   2 #
   3 #               This is the top-level Makefile for GHC
   4 #
   5 # Targets:
   6 #
   7 #       bootstrap (DEFAULT)
   8 #               Builds GHC, then builds the libraries,
   9 #               then uses this GHC ("stage 1") to build itself
  10 #               ("stage 2").
  11 #
  12 #       bootstrap2
  13 #               Same as bootstrap
  14 #
  15 #       bootstrap3
  16 #               bootstrap2 + we build GHC one more time ("stage 3")
  17 #
  18 #       stage1
  19 #               Just build up to stage 1
  20 #
  21 #       stage2
  22 #               Just build stage 2 (stage 1 must be built)
  23 #
  24 #       stage3
  25 #               Just build stage 3 (stage 2 must be built)
  26 #
  27 #       all
  28 #               Same as bootstrap
  29 #
  30 #       install
  31 #               Install everything, including stage 2 compiler by default
  32 #               (override with stage=3, for example).
  33 #
  34 #       dist
  35 #               Make a source dist (WARNING: runs 'make distclean' first)
  36 #
  37 #       binary-dist
  38 #               Builds a binary distribution
  39 #
  40 #       hc-file-bundle
  41 #               Builds an HC-file bundle, for bootstrapping
  42 #
  43 #       clean, distclean, maintainer-clean
  44 #               Increasing levels of cleanliness
  45 #
  46 ############################################################################
  47
  48 TOP=.
  49 include $(TOP)/mk/boilerplate.mk
  50
  51 #
  52 # Order is important! It's e.g. necessary to descend into include/
  53 # before the rest to have a config.h, etc.
  54 #
  55 # If we're booting from .hc files, swap the order
  56 # we descend into subdirs - to boot utils must be before driver.
  57 #
  58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
  59
  60 # We can't 'make boot' in libraries until stage1 is built
  61 ifeq "$(BootingFromHc)" "YES"
  62 SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver
  63 else
  64 SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts
  65 endif
  66
  67 SUBDIRS = gmp includes compat utils driver docs rts libraries compiler
  68
  69 # Sanity check that all the boot libraries are in the tree, to catch
  70 # failure to run darcs-all.
  71 check-packages :
  72         @ds=`cat libraries/boot-packages`;\
  73         for d in $$ds; do \
  74           if test ! -d libraries/$$d; then \
  75              echo "Looks like you're missing libraries/$$d,"; \
  76              echo "maybe you haven't done './darcs-all get'?"; \
  77              exit 1; \
  78           fi \
  79         done
  80         @if test ! -f libraries/base/configure; then \
  81             echo "Looks like you're missing base's configure script."; \
  82             echo "Did you run 'sh boot' at the top level?"; \
  83             exit 1; \
  84         fi
  85
  86 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
  87 ifneq "$(WhatGccIsCalled)" ""
  88 GCC_LIB_DEP = stamp.inplace-gcc-lib
  89 endif
  90 endif
  91
  92 stage1 : $(GCC_LIB_DEP) check-packages
  93         $(MAKE) -C utils/mkdependC boot
  94         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
  95         for i in $(SUBDIRS_BUILD); do \
  96           echo "------------------------------------------------------------------------"; \
  97           echo "== $(MAKE) boot $(MFLAGS);"; \
  98           echo " in $(shell pwd)/$$i"; \
  99           echo "------------------------------------------------------------------------"; \
 100           $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
 101           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 102         done; \
 103         for i in $(SUBDIRS_BUILD); do \
 104           echo "------------------------------------------------------------------------"; \
 105           echo "== $(MAKE) all $(MFLAGS);"; \
 106           echo " in $(shell pwd)/$$i"; \
 107           echo "------------------------------------------------------------------------"; \
 108           $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
 109           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 110         done
 111         $(MAKE) -C libraries boot
 112         $(MAKE) -C libraries all
 113
 114 stage2 : check-packages
 115         $(MAKE) -C compiler boot stage=2
 116         $(MAKE) -C compiler stage=2
 117
 118 stage3 : check-packages
 119         $(MAKE) -C compiler boot stage=3
 120         $(MAKE) -C compiler stage=3
 121
 122 bootstrap  : bootstrap2
 123
 124 bootstrap2 : stage1
 125         $(MAKE) stage2
 126
 127 bootstrap3 : bootstrap2
 128         $(MAKE) stage3
 129
 130 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 131 ifneq "$(WhatGccIsCalled)" ""
 132 all :: stamp.inplace-gcc-lib
 133
 134 .PHONY: stamp.inplace-gcc-lib
 135
 136 # This is a hack to make Cabal able to find ld when we run tests with
 137 # the inplace ghc. We should probably install all the gcc stuff in our
 138 # tree somewhere, and then have install copy it from there rather than
 139 # from the filesystem.
 140 stamp.inplace-gcc-lib:
 141         $(RM) -r compiler/gcc-lib
 142         mkdir compiler/gcc-lib
 143         cp $(LD) compiler/gcc-lib
 144         touch $@
 145
 146 clean ::
 147         $(RM) -r compiler/gcc-lib
 148         $(RM) -f inplace-gcc-lib
 149 endif
 150 endif
 151
 152 all :: bootstrap
 153
 154 # -----------------------------------------------------------------------------
 155 # Installing
 156
 157 # We want to install the stage 2 bootstrapped compiler by default, but we let
 158 # the user override this by saying 'make install stage=1', for example.
 159 ifeq "$(stage)" ""
 160 INSTALL_STAGE = stage=2
 161 else
 162 INSTALL_STAGE =
 163 endif
 164
 165 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 166 install :: check-packages
 167         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 168         for i in $(SUBDIRS); do \
 169           echo "------------------------------------------------------------------------"; \
 170           echo "== $(MAKE) $@ $(MFLAGS);"; \
 171           echo " in $(shell pwd)/$$i"; \
 172           echo "------------------------------------------------------------------------"; \
 173           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 174           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 175         done
 176
 177 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 178 # These files need to be in the InstallShield
 179 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
 180 # in the top-level directory of the distribution
 181 INSTALL_DATAS += ANNOUNCE LICENSE README
 182 endif
 183
 184 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
 185 # and the perl interpreter and dll into the GHC prefix directory.
 186 # Gcc and Perl source locations derived from configuration data.
 187 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 188 ifneq "$(WhatGccIsCalled)" ""
 189 install ::
 190         -mkdir $(prefix)/gcc-lib
 191         -mkdir $(prefix)/include
 192         -mkdir $(prefix)/include/mingw
 193         -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
 194         -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 195         -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 196         -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 197         -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
 198         -cp $(GccDir)gcc.exe $(prefix)
 199         -cp $(GccDir)as.exe $(prefix)/gcc-lib
 200         -cp $(GccDir)ld.exe $(prefix)/gcc-lib
 201         -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
 202         -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
 203         -cp $(GhcDir)../perl.exe $(prefix)
 204         -cp $(GhcDir)../perl56.dll $(prefix)
 205 endif
 206 endif
 207
 208 # Install gcc-extra-opts
 209 install ::
 210         $(INSTALL_DIR) $(DESTDIR)$(libdir)
 211         $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
 212
 213 install-docs ::
 214         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 215         for i in $(SUBDIRS); do \
 216           echo "------------------------------------------------------------------------"; \
 217           echo "== $(MAKE) $@ $(MFLAGS);"; \
 218           echo " in $(shell pwd)/$$i"; \
 219           echo "------------------------------------------------------------------------"; \
 220           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 221           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 222         done
 223
 224 # -----------------------------------------------------------------------------
 225 # Making a binary distribution
 226 #
 227 # `dist' `binary-dist'
 228 #      Create a distribution tar file for this program. The tar file
 229 #      should be set up so that the file names in the tar file start with
 230 #      a subdirectory name which is the name of the package it is a
 231 #      distribution for. This name can include the version number.
 232 #
 233 #      For example, the distribution tar file of GCC version 1.40 unpacks
 234 #      into a subdirectory named `gcc-1.40'.
 235 #
 236 #      The easiest way to do this is to create a subdirectory
 237 #      appropriately named, use ln or cp to install the proper files in
 238 #      it, and then tar that subdirectory.
 239 #
 240 #      The dist target should explicitly depend on all non-source files
 241 #      that are in the distribution, to make sure they are up to date in
 242 #      the distribution. See Making Releases.
 243 #
 244 #       binary-dist is a GHC addition for binary distributions
 245 #
 246
 247 binary-dist::
 248         -rm -rf $(BIN_DIST_DIR)
 249         -$(RM) $(BIN_DIST_DIR).tar.gz
 250
 251 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 252
 253 binary-dist::
 254         $(MAKE) prefix=$(BIN_DIST_DIR) install
 255
 256 binary-dist::
 257         cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
 258
 259 binary-dist::
 260         $(MKDIRHIER) $(BIN_DIST_DIR)/icons
 261         cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
 262
 263 else
 264
 265 BinDistDirs = includes compiler docs rts
 266
 267 BIN_DIST_TOP= distrib/Makefile \
 268               distrib/configure-bin.ac \
 269               distrib/INSTALL \
 270               distrib/README \
 271               ANNOUNCE \
 272               LICENSE \
 273               install-sh \
 274               extra-gcc-opts.in \
 275               config.guess \
 276               config.sub   \
 277               aclocal.m4
 278
 279 ifeq "$(darwin_TARGET_OS)" "1"
 280 BIN_DIST_TOP+=mk/fix_install_names.sh
 281 endif
 282
 283 .PHONY: binary-dist-pre% binary-dist binary-pack
 284
 285 binary-dist:: binary-dist-pre
 286
 287 binary-dist-pre::
 288         $(MKDIRHIER) $(BIN_DIST_DIR)/mk
 289         echo 'include $$(TOP)/Makefile-vars' >  $(BIN_DIST_DIR)/mk/boilerplate.mk
 290         echo 'include $$(TOP)/mk/package.mk' >  $(BIN_DIST_DIR)/mk/target.mk
 291         echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 292         echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 293         echo ''                              >  $(BIN_DIST_DIR)/mk/compat.mk
 294         cp mk/package.mk $(BIN_DIST_DIR)/mk/
 295         cp mk/install.mk $(BIN_DIST_DIR)/mk/
 296         cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
 297         $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
 298         $(MKDIRHIER) $(BIN_DIST_DIR)/share
 299
 300 binary-dist::
 301         $(MAKE) -C gmp      binary-dist DOING_BIN_DIST=YES
 302         $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
 303         $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
 304         # XXX $(MAKE) -C docs     binary-dist DOING_BIN_DIST=YES
 305         $(MAKE) -C rts      binary-dist DOING_BIN_DIST=YES
 306         $(MAKE) -C driver   binary-dist DOING_BIN_DIST=YES
 307         $(MAKE) -C utils    binary-dist DOING_BIN_DIST=YES
 308
 309 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
 310
 311 binary-dist::
 312         @for i in $(BIN_DIST_TOP); do \
 313           if test -f "$$i"; then \
 314              echo cp $$i $(BIN_DIST_DIR); \
 315              cp $$i $(BIN_DIST_DIR); \
 316           fi; \
 317         done;
 318         @echo "Configuring the Makefile for this project..."
 319         echo                                                         >  $(VARFILE)
 320         echo "package = ghc"                                         >> $(VARFILE)
 321         echo "version = $(ProjectVersion)"                           >> $(VARFILE)
 322         echo "ProjectVersion = $(ProjectVersion)"                    >> $(VARFILE)
 323         echo "HaveLibGmp = $(HaveLibGmp)"                            >> $(VARFILE)
 324         echo "GhcLibsWithUnix = $(GhcLibsWithUnix)"                  >> $(VARFILE)
 325         echo "GhcWithInterpreter = $(GhcWithInterpreter)"            >> $(VARFILE)
 326         echo "GhcHasReadline = $(GhcHasReadline)"                    >> $(VARFILE)
 327         echo "BootingFromHc = $(BootingFromHc)"                      >> $(VARFILE)
 328         cat distrib/Makefile-bin-vars.in                             >> $(VARFILE)
 329         @echo "Generating a shippable configure script.."
 330         $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
 331         ( cd $(BIN_DIST_DIR); autoreconf )
 332
 333 #
 334 # binary dist'ing the documentation.
 335 # The default documentation to build/install is given below; overrideable
 336 # via build.mk or the 'make' command-line.
 337 #
 338 # If BINDIST_DOC_WAYS is set, use that
 339 # If XMLDocWays is set, use that
 340 # Otherwise, figure out what we can build based on configure results
 341
 342 ifndef BINDIST_DOC_WAYS
 343
 344 ifneq "$(XMLDocWays)" ""
 345 BINDIST_DOC_WAYS = $(XMLDocWays)
 346 else
 347 ifneq "$(XSLTPROC)" ""
 348 BINDIST_DOC_WAYS = html
 349 ifneq "$(FOP)" ""
 350 BINDIST_DOC_WAYS += ps pdf
 351 else
 352 ifneq "$(PDFXMLTEX)" ""
 353 BINDIST_DOC_WAYS += pdf
 354 endif
 355 ifneq "$(XMLTEX)" ""
 356 ifneq "$(DVIPS)" ""
 357 BINDIST_DOC_WAYS += ps
 358 endif # DVIPS
 359 endif # XMLTEX
 360 endif # FOP
 361 endif # XSLTPROC
 362 endif # XMLDocWays
 363
 364 endif # BINDIST_DOC_WAYS
 365
 366 ifneq "$(DIR_DOCBOOK_XSL)" ""
 367 .PHONY: binary-dist-doc-%
 368
 369 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
 370
 371 binary-dist :: $(BINARY_DIST_DOC_RULES)
 372
 373 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
 374         $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
 375         $(MAKE) -C $* $(MFLAGS) install-docs \
 376                         MAKING_BIN_DIST=1 \
 377                 XMLDocWays="$(BINDIST_DOC_WAYS)" \
 378                 prefix=$(BIN_DIST_DIR) \
 379                 exec_prefix=$(BIN_DIST_DIR) \
 380                 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
 381                 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 382                 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
 383                 datadir=$(BIN_DIST_DIR)/share
 384 endif
 385
 386 .PHONY: binary-dist-doc-%
 387
 388 binary-dist::
 389         $(MAKE) -C libraries binary-dist
 390
 391 endif
 392
 393 # Tar up the distribution and build a manifest
 394 binary-dist :: tar-binary-dist
 395
 396 .PHONY: tar-binary-dist
 397 tar-binary-dist:
 398         ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 399         ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
 400
 401 PUBLISH_FILES = $(BIN_DIST_TARBALL)
 402
 403 # Upload the distribution and documentation
 404 ifneq "$(ISCC)" ""
 405 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
 406 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
 407
 408 PUBLISH_FILES += $(WINDOWS_INSTALLER)
 409
 410 binary-dist :: generate-windows-installer
 411
 412 .PHONY: generate-windows-installer
 413 generate-windows-installer ::
 414         $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
 415 endif
 416
 417 # Upload the distribution and documentation
 418 ifneq "$(PublishLocation)" ""
 419 publish :: publish-binary-dist
 420 endif
 421
 422 .PHONY: publish-binary-dist
 423 publish-binary-dist ::
 424         @for f in $(PUBLISH_FILES); do \
 425             for i in 0 1 2 3 4 5 6 7 8 9; do \
 426                 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
 427                 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
 428             done \
 429         done
 430
 431 # You need to first make binddisttest, and then run
 432 #     make publish 'prefix=$(BIN_DIST_INST_DIR)'
 433 # for this to find the right place.
 434
 435 # We assume that Windows means Cygwin, as we can't just use docdir
 436 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
 437 # the machine c.
 438
 439 ifeq "$(Windows)" "YES"
 440 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
 441 else
 442 PUBLISH_DOCDIR = $(docdir)
 443 endif
 444
 445 publish-binary-dist ::
 446         $(PublishCp) -r $(PUBLISH_DOCDIR)/* $(PublishLocation)/docs
 447
 448 binary-dist::
 449         @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
 450
 451 # -----------------------------------------------------------------------------
 452 # Building source distributions
 453 #
 454 # Do it like this:
 455 #
 456 #       $ make
 457 #       $ make dist
 458 #
 459 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
 460 #
 461
 462 .PHONY: dist
 463
 464 #
 465 # Directory in which we're going to build the src dist
 466 #
 467 SRC_DIST_NAME=ghc-$(ProjectVersion)
 468 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 469
 470 #
 471 # Files to include in source distributions
 472 #
 473 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib,$(SUBDIRS))
 474 SRC_DIST_FILES += \
 475         configure.ac config.guess config.sub configure \
 476         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 477         ghc.spec.in extra-gcc-opts.in VERSION boot
 478
 479 # -----------------------------------------------------------------------------
 480 # Source distributions
 481
 482 # A source dist is built from a complete build tree, because we
 483 # require some extra files not contained in a darcs checkout: the
 484 # output from Happy and Alex, for example.
 485 #
 486 # The steps performed by 'make dist' are as follows:
 487 #   - create a complete link-tree of the current build tree in /tmp
 488 #   - run 'make distclean' on that tree
 489 #   - remove a bunch of other files that we know shouldn't be in the dist
 490 #   - tar up first the extralibs package, then the main source package
 491
 492 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
 493
 494 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
 495 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
 496
 497 VERSION :
 498         echo $(ProjectVersion) >VERSION
 499
 500 dist :: VERSION
 501
 502 dist ::
 503         $(RM) -rf $(SRC_DIST_DIR)
 504         $(RM) $(SRC_DIST_NAME).tar.gz
 505         mkdir $(SRC_DIST_DIR)
 506         ( cd $(SRC_DIST_DIR) \
 507           && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
 508           && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
 509           && $(MAKE) distclean \
 510           && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; fi \
 511           && $(RM) -rf compiler/stage[123] mk/build.mk \
 512           && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
 513         )
 514         tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
 515         $(RM) -rf $(EXTRA_LIBS)
 516         tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
 517
 518 # Upload the distribution(s)
 519 # Retrying is to work around buggy firewalls that corrupt large file transfers
 520 # over SSH.
 521 ifneq "$(PublishLocation)" ""
 522 dist ::
 523         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 524                 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
 525                 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
 526         done
 527         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 528                 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
 529                 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
 530         done
 531 endif
 532
 533 # -----------------------------------------------------------------------------
 534 # HC file bundles
 535
 536 hc-file-bundle :
 537         $(RM) -r ghc-$(ProjectVersion)
 538         $(LN_S) . ghc-$(ProjectVersion)
 539         $(FIND) ghc-$(ProjectVersion)/compiler \
 540              ghc-$(ProjectVersion)/utils \
 541              ghc-$(ProjectVersion)/compat \
 542              ghc-$(ProjectVersion)/libraries -follow \
 543           \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
 544         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
 545              if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
 546                 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
 547              fi; \
 548         done;
 549         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
 550              if test "x$$f" != "x"; then \
 551                 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
 552              fi; \
 553         done;
 554         echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
 555         echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
 556         echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
 557         echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
 558         echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
 559         tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
 560
 561 # -----------------------------------------------------------------------------
 562 # Cleaning
 563
 564 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
 565
 566 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
 567         ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts
 568
 569 # don't clean config.mk: it's needed when cleaning stuff later on
 570 LATE_DIST_CLEAN_FILES += mk/config.mk
 571
 572 # VERSION is shipped in a source dist
 573 MAINTAINER_CLEAN_FILES += VERSION
 574
 575 extraclean::
 576         $(RM) -rf autom4te.cache
 577
 578 clean distclean ::
 579         $(MAKE) -C bindisttest $@
 580         if test -d testsuite; then $(MAKE) -C testsuite $@; fi
 581
 582 # -----------------------------------------------------------------------------
 583
 584 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
 585 NO_BOOT_TARGET=YES
 586 NO_ALL_TARGET=YES
 587 NO_INSTALL_TARGET=YES
 588
 589 include $(TOP)/mk/target.mk
 590
 591 # -----------------------------------------------------------------------------
 592