Makefile

   1 ############################################################################
   2 #
   3 #               This is the top-level Makefile for GHC
   4 #
   5 # Targets:
   6 #
   7 #       bootstrap (DEFAULT)
   8 #               Builds GHC, then builds the libraries,
   9 #               then uses this GHC ("stage 1") to build itself
  10 #               ("stage 2").
  11 #
  12 #       bootstrap2
  13 #               Same as bootstrap
  14 #
  15 #       bootstrap3
  16 #               bootstrap2 + we build GHC one more time ("stage 3")
  17 #
  18 #       stage1
  19 #               Just build up to stage 1
  20 #
  21 #       stage2
  22 #               Just build stage 2 (stage 1 must be built)
  23 #
  24 #       stage3
  25 #               Just build stage 3 (stage 2 must be built)
  26 #
  27 #       all
  28 #               Same as bootstrap
  29 #
  30 #       install
  31 #               Install everything, including stage 2 compiler by default
  32 #               (override with stage=3, for example).
  33 #
  34 #       dist
  35 #               Make a source dist (WARNING: runs 'make distclean' first)
  36 #
  37 #       binary-dist
  38 #               Builds a binary distribution
  39 #
  40 #       framework-pkg  [MacOS only]
  41 #               Builds /Library/Frameworks/GHC.framework wrapped into a Mac
  42 #               installer package
  43 #
  44 #       framework-binary-dist  [MacOS only]
  45 #               Builds GHC.framework encapsulating a binary distribution
  46 #               (to give a relocatable framework)
  47 #
  48 #       hc-file-bundle
  49 #               Builds an HC-file bundle, for bootstrapping
  50 #
  51 #       clean, distclean, maintainer-clean
  52 #               Increasing levels of cleanliness
  53 #
  54 ############################################################################
  55
  56 TOP=.
  57 include $(TOP)/mk/boilerplate.mk
  58
  59 #
  60 # Order is important! It's e.g. necessary to descend into include/
  61 # before the rest to have a config.h, etc.
  62 #
  63 # If we're booting from .hc files, swap the order
  64 # we descend into subdirs - to boot utils must be before driver.
  65 #
  66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
  67
  68 # We can't 'make boot' in libraries until stage1 is built
  69 ifeq "$(BootingFromHc)" "YES"
  70 SUBDIRS_BUILD = includes compiler docs utils driver
  71 else
  72 SUBDIRS_BUILD = includes utils driver docs compiler libraries/Cabal/doc
  73 endif
  74
  75 SUBDIRS = gmp libffi includes utils driver docs rts compiler ghc libraries libraries/Cabal/doc
  76
  77 check-all: check-tools check-packages
  78
  79 check-tools:
  80         @:
  81 ifeq "$(HADDOCK_DOCS)" "YES"
  82 ifeq "$(HADDOCK)"      ""
  83         echo "Couldn't find haddock" >&2
  84         exit 1
  85 endif
  86 endif
  87
  88 # Sanity check that all the boot libraries are in the tree, to catch
  89 # failure to run darcs-all.
  90 check-packages :
  91         @ds=`grep "^[^# ][^ ]*  *[^ ][^ ]*$$" packages | sed "s/ .*//"`;\
  92         for d in $$ds; do \
  93           if test ! -d $$d; then \
  94              echo "Looks like you're missing $$d,"; \
  95              echo "maybe you haven't done './darcs-all get'?"; \
  96              exit 1; \
  97           fi \
  98         done
  99         @if test ! -f libraries/base/configure; then \
 100             echo "Looks like you're missing base's configure script."; \
 101             echo "Did you run 'sh boot' at the top level?"; \
 102             exit 1; \
 103         fi
 104
 105 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 106 ifneq "$(WhatGccIsCalled)" ""
 107 GCC_LIB_DEP = stamp.inplace-gcc-lib
 108 endif
 109 endif
 110
 111 stage1 : $(GCC_LIB_DEP) check-all
 112         $(MAKE) -C libraries boot
 113         $(MAKE) -C gmp       all
 114         $(MAKE) -C libffi    all
 115         $(MAKE) -C utils/mkdependC boot
 116         $(MAKE) -C utils with-bootstrapping-compiler
 117         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 118         for i in $(SUBDIRS_BUILD); do \
 119           echo "------------------------------------------------------------------------"; \
 120           echo "== $(MAKE) boot $(MFLAGS);"; \
 121           echo " in $(shell pwd)/$$i"; \
 122           echo "------------------------------------------------------------------------"; \
 123           $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
 124           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 125         done; \
 126         for i in $(SUBDIRS_BUILD); do \
 127           echo "------------------------------------------------------------------------"; \
 128           echo "== $(MAKE) all $(MFLAGS);"; \
 129           echo " in $(shell pwd)/$$i"; \
 130           echo "------------------------------------------------------------------------"; \
 131           $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
 132           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 133         done
 134         $(MAKE) -C ghc stage=1 boot
 135         $(MAKE) -C ghc stage=1
 136         $(MAKE) -C rts boot
 137         $(MAKE) -C rts
 138         $(MAKE) -C libraries all
 139         $(MAKE) -C utils with-stage-1
 140
 141 # When making distributions (i.e., whether with binary-dist or using the
 142 # vanilla install target to create an installer package), we can have problems
 143 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
 144 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
 145 # an example.  Thus, we explicitly build a second version with the stage 1
 146 # compiler of all utils that get installed and of all extra support binaries
 147 # includes in binary dists.
 148 stage2 : check-all
 149         $(MAKE) -C compiler stage=2 boot
 150         $(MAKE) -C compiler stage=2
 151 ifeq "$(HADDOCK_DOCS)" "YES"
 152         $(MAKE) -C compiler stage=2 doc
 153 endif
 154         $(MAKE) -C ghc      stage=2 boot
 155         $(MAKE) -C ghc      stage=2
 156
 157 stage3 : check-all
 158         $(MAKE) -C compiler stage=3 boot
 159         $(MAKE) -C compiler stage=3
 160         $(MAKE) -C ghc      stage=3 boot
 161         $(MAKE) -C ghc      stage=3
 162
 163 bootstrap  : bootstrap2
 164
 165 bootstrap2 : stage1
 166         $(MAKE) stage2
 167
 168 bootstrap3 : bootstrap2
 169         $(MAKE) stage3
 170
 171 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 172 ifneq "$(WhatGccIsCalled)" ""
 173 all :: stamp.inplace-gcc-lib
 174
 175 .PHONY: stamp.inplace-gcc-lib
 176
 177 # This is a hack to make Cabal able to find ld when we run tests with
 178 # the inplace ghc. We should probably install all the gcc stuff in our
 179 # tree somewhere, and then have install copy it from there rather than
 180 # from the filesystem.
 181 stamp.inplace-gcc-lib:
 182         $(RM) -r ghc/gcc-lib
 183         mkdir ghc/gcc-lib
 184         cp $(LD) ghc/gcc-lib
 185         touch $@
 186
 187 clean ::
 188         $(RM) -r ghc/gcc-lib
 189         $(RM) -f inplace-gcc-lib
 190 endif
 191 endif
 192
 193 all :: bootstrap
 194
 195 # -----------------------------------------------------------------------------
 196 # Installing
 197
 198 # We want to install the stage 2 bootstrapped compiler by default, but we let
 199 # the user override this by saying 'make install stage=1', for example.
 200 ifeq "$(stage)" ""
 201 INSTALL_STAGE = stage=2
 202 else
 203 INSTALL_STAGE =
 204 endif
 205
 206 install-strip:
 207         $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
 208
 209 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 210 install :: check-packages
 211         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 212         for i in $(SUBDIRS); do \
 213           echo "------------------------------------------------------------------------"; \
 214           echo "== $(MAKE) $@ $(MFLAGS);"; \
 215           echo " in $(shell pwd)/$$i"; \
 216           echo "------------------------------------------------------------------------"; \
 217           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 218           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 219         done
 220
 221 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 222 # These files need to be in the InstallShield
 223 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
 224 # in the top-level directory of the distribution
 225 INSTALL_DATAS += ANNOUNCE LICENSE README
 226 endif
 227
 228 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
 229 # and the perl interpreter and dll into the GHC prefix directory.
 230 # Gcc and Perl source locations derived from configuration data.
 231 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 232 ifneq "$(WhatGccIsCalled)" ""
 233 install ::
 234         -mkdir $(prefix)/gcc-lib
 235         -mkdir $(prefix)/include
 236         -mkdir $(prefix)/include/mingw
 237         -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
 238         -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 239         -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 240         -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 241         -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
 242         -cp $(GccDir)gcc.exe $(prefix)
 243         -cp $(GccDir)as.exe $(prefix)/gcc-lib
 244         -cp $(GccDir)ld.exe $(prefix)/gcc-lib
 245         -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
 246         -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
 247         -cp $(GhcDir)../perl.exe $(prefix)
 248         -cp $(GhcDir)../perl56.dll $(prefix)
 249 endif
 250 endif
 251
 252 # Install gcc-extra-opts
 253 install ::
 254         $(INSTALL_DIR) $(DESTDIR)$(libdir)
 255         $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
 256
 257 install-docs ::
 258         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 259         for i in $(SUBDIRS); do \
 260           echo "------------------------------------------------------------------------"; \
 261           echo "== $(MAKE) $@ $(MFLAGS);"; \
 262           echo " in $(shell pwd)/$$i"; \
 263           echo "------------------------------------------------------------------------"; \
 264           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 265           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 266         done
 267
 268 # -----------------------------------------------------------------------------
 269 # Making a binary distribution
 270 #
 271 # `dist' `binary-dist'
 272 #      Create a distribution tar file for this program. The tar file
 273 #      should be set up so that the file names in the tar file start with
 274 #      a subdirectory name which is the name of the package it is a
 275 #      distribution for. This name can include the version number.
 276 #
 277 #      For example, the distribution tar file of GCC version 1.40 unpacks
 278 #      into a subdirectory named `gcc-1.40'.
 279 #
 280 #      The easiest way to do this is to create a subdirectory
 281 #      appropriately named, use ln or cp to install the proper files in
 282 #      it, and then tar that subdirectory.
 283 #
 284 #      The dist target should explicitly depend on all non-source files
 285 #      that are in the distribution, to make sure they are up to date in
 286 #      the distribution. See Making Releases.
 287 #
 288 #       binary-dist is a GHC addition for binary distributions
 289 #
 290
 291 binary-dist::
 292         -rm -rf $(BIN_DIST_DIR)
 293         -$(RM) $(BIN_DIST_TARBALL)
 294
 295 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 296
 297 binary-dist::
 298         $(MAKE) prefix=$(BIN_DIST_DIR) install
 299         $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
 300
 301 binary-dist::
 302         cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
 303
 304 binary-dist::
 305         $(MKDIRHIER) $(BIN_DIST_DIR)/icons
 306         cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
 307
 308 else
 309
 310 .PHONY: binary-dist
 311
 312 BIN_DIST_VARFILE=$(BIN_DIST_PREP)/Makefile-vars.in
 313
 314 WHERE_AM_I = $(BIN_DIST_NAME)
 315
 316 binary-dist::
 317 # For the most part we will be putting filenames in $(BIN_DIST_LIST),
 318 # and telling tar to tar all of those files up. So to start with we
 319 # remove $(BIN_DIST_LIST) so that we can start with an empty slate
 320         $(RM) -f $(BIN_DIST_LIST)
 321 # Now we add a few files from mk/ to $(BIN_DIST_LIST)
 322         echo $(WHERE_AM_I)/mk/package.mk     >> $(BIN_DIST_LIST)
 323         echo $(WHERE_AM_I)/mk/install.mk     >> $(BIN_DIST_LIST)
 324         echo $(WHERE_AM_I)/mk/recurse.mk     >> $(BIN_DIST_LIST)
 325         echo $(WHERE_AM_I)/mk/cabal.mk       >> $(BIN_DIST_LIST)
 326         echo $(WHERE_AM_I)/mk/cabal-flags.mk >> $(BIN_DIST_LIST)
 327         echo $(WHERE_AM_I)/mk/fptools.css    >> $(BIN_DIST_LIST)
 328         echo $(WHERE_AM_I)/ANNOUNCE          >> $(BIN_DIST_LIST)
 329         echo $(WHERE_AM_I)/LICENSE           >> $(BIN_DIST_LIST)
 330         echo $(WHERE_AM_I)/install-sh        >> $(BIN_DIST_LIST)
 331         echo $(WHERE_AM_I)/extra-gcc-opts.in >> $(BIN_DIST_LIST)
 332         echo $(WHERE_AM_I)/config.guess      >> $(BIN_DIST_LIST)
 333         echo $(WHERE_AM_I)/config.sub        >> $(BIN_DIST_LIST)
 334 # Now we recurse into various subdirectories and tell them to add and
 335 # files that they want into $(BIN_DIST_LIST)
 336 # XXX Ug, this duplication of "-C foo WHERE_AM_I=.../foo" isn't nice.
 337         $(MAKE) -C gmp                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/gmp
 338         $(MAKE) -C includes            binary-dist WHERE_AM_I=$(WHERE_AM_I)/includes
 339         $(MAKE) -C compiler            binary-dist WHERE_AM_I=$(WHERE_AM_I)/compiler $(INSTALL_STAGE)
 340         $(MAKE) -C ghc                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/ghc      $(INSTALL_STAGE)
 341         $(MAKE) -C rts                 binary-dist WHERE_AM_I=$(WHERE_AM_I)/rts
 342         $(MAKE) -C driver              binary-dist WHERE_AM_I=$(WHERE_AM_I)/driver
 343         $(MAKE) -C utils               binary-dist WHERE_AM_I=$(WHERE_AM_I)/utils
 344         $(MAKE) -C docs                binary-dist WHERE_AM_I=$(WHERE_AM_I)/docs
 345         $(MAKE) -C libraries           binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries
 346         $(MAKE) -C libraries/Cabal/doc binary-dist WHERE_AM_I=$(WHERE_AM_I)/libraries/Cabal/doc
 347 # Now thinks get messier. Some files we need to move around, rename or
 348 # generate. We do this under $(BIN_DIST_PREP).
 349         $(RM) -rf    $(BIN_DIST_PREP_DIR)
 350         $(MKDIRHIER) $(BIN_DIST_PREP)/mk
 351         echo 'include $$(TOP)/Makefile-vars' >  $(BIN_DIST_PREP)/mk/boilerplate.mk
 352         echo 'include $$(TOP)/mk/package.mk' >  $(BIN_DIST_PREP)/mk/target.mk
 353         echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_PREP)/mk/target.mk
 354         echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_PREP)/mk/target.mk
 355         touch                                   $(BIN_DIST_PREP)/mk/bindist.mk
 356 ifeq "$(darwin_TARGET_OS)" "1"
 357         cp mk/fix_install_names.sh $(BIN_DIST_PREP)/mk
 358 endif
 359
 360         cp distrib/Makefile         $(BIN_DIST_PREP)
 361         cp distrib/INSTALL          $(BIN_DIST_PREP)
 362         cp distrib/README           $(BIN_DIST_PREP)
 363         cp distrib/configure-bin.ac $(BIN_DIST_PREP)/configure.ac
 364 # We can't just list aclocal.m4 in $(BIN_DIST_LIST), as it needs to be
 365 # next to configure.ac when we run autoreconf
 366         cp aclocal.m4               $(BIN_DIST_PREP)
 367         cd $(BIN_DIST_PREP) && autoreconf
 368 # We need to copy the pwd program that was built with stage1 to where
 369 # the build system expects to find it, i.e. the location the pwd built
 370 # with the bootstrapping compiler normally occupies
 371         $(MKDIRHIER) $(BIN_DIST_PREP)/utils/pwd
 372         cp utils/pwd/dist-install/build/pwd/pwd $(BIN_DIST_PREP)/utils/pwd
 373 # And likewise the installPackage program
 374         $(MKDIRHIER) $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
 375         cp utils/installPackage/dist-install/build/installPackage/installPackage \
 376            $(BIN_DIST_PREP)/utils/installPackage/install-inplace/bin
 377
 378         echo "package = ghc"                              >> $(BIN_DIST_VARFILE)
 379         echo "version = $(ProjectVersion)"                >> $(BIN_DIST_VARFILE)
 380         echo "ProjectVersion = $(ProjectVersion)"         >> $(BIN_DIST_VARFILE)
 381         echo "HaveLibGmp = $(HaveLibGmp)"                 >> $(BIN_DIST_VARFILE)
 382         echo "GhcLibsWithUnix = $(GhcLibsWithUnix)"       >> $(BIN_DIST_VARFILE)
 383         echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(BIN_DIST_VARFILE)
 384         echo "GhcHasEditline = $(GhcHasEditline)"         >> $(BIN_DIST_VARFILE)
 385         echo "BootingFromHc = $(BootingFromHc)"           >> $(BIN_DIST_VARFILE)
 386         echo "XMLDocWays = $(XMLDocWays)"                 >> $(BIN_DIST_VARFILE)
 387 # We won't actually use xsltproc, but we need to know if it's "" or not
 388         echo "XSLTPROC = $(XSLTPROC)"                     >> $(BIN_DIST_VARFILE)
 389         echo "TARGETPLATFORM = $(TARGETPLATFORM)"         >> $(BIN_DIST_VARFILE)
 390         echo "HADDOCK_DOCS = $(HADDOCK_DOCS)"             >> $(BIN_DIST_VARFILE)
 391         echo "INTEGER_LIBRARY = $(INTEGER_LIBRARY)"       >> $(BIN_DIST_VARFILE)
 392         cat distrib/Makefile-bin-vars.in                  >> $(BIN_DIST_VARFILE)
 393
 394 # With that done, we can now build the actual tarball
 395
 396         $(RM) -f $(BIN_DIST_NAME)
 397         ln -s . $(BIN_DIST_NAME)
 398         tar cf $(BIN_DIST_TAR) -T $(BIN_DIST_LIST)
 399         cd $(BIN_DIST_PREP_DIR) && tar rf $(BIN_DIST_TAR) $(BIN_DIST_NAME)
 400         bzip2 < $(BIN_DIST_TAR) > $(BIN_DIST_TAR_BZ2)
 401         tar tf $(BIN_DIST_TAR) | sort > bin-manifest-$(ProjectVersion)
 402 endif
 403
 404 # XXX Presumably we still need to do this for Windows?
 405 ## Tar up the distribution and build a manifest
 406 #binary-dist :: tar-binary-dist
 407 #
 408 #.PHONY: tar-binary-dist
 409 #tar-binary-dist:
 410 #       ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 411 #       ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
 412
 413 PUBLISH_FILES = $(BIN_DIST_TARBALL)
 414
 415 # Upload the distribution and documentation
 416 ifneq "$(ISCC)" ""
 417 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
 418 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
 419
 420 PUBLISH_FILES += $(WINDOWS_INSTALLER)
 421
 422 binary-dist :: generate-windows-installer
 423
 424 .PHONY: generate-windows-installer
 425 generate-windows-installer ::
 426         $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
 427 endif
 428
 429 # Upload the distribution and documentation
 430 ifneq "$(PublishLocation)" ""
 431 publish ::
 432         make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
 433 endif
 434
 435 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
 436
 437 .PHONY: publish-binary-dist
 438 publish-binary-dist ::
 439         @for f in $(PUBLISH_FILES); \
 440             do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
 441         done
 442
 443 # You need to "make binddisttest" before publishing the docs, as it
 444 # works by publish setting $(prefix) to inside the binddisttest
 445 # directory so $(docdir) points to the right place.
 446
 447 # We assume that Windows means Cygwin, as we can't just use docdir
 448 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
 449 # the machine c.
 450
 451 ifeq "$(Windows)" "YES"
 452 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
 453 else
 454 PUBLISH_DOCDIR = $(docdir)
 455 endif
 456
 457 publish-binary-dist ::
 458         $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
 459
 460 binary-dist::
 461         @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
 462
 463 # -----------------------------------------------------------------------------
 464 # Building MacOS installer packages
 465 #
 466 # 'framework-pkg'
 467 #       Create an installer package for /Library/Frameworks/GHC.framework
 468 #
 469 # 'framework-binary-dist'
 470 #       Create an installer package for GHC.framework encapsulating a
 471 #       binary-dist to make it relocatable
 472 #       FIXME: This is only partially implemented so far
 473
 474 ifeq "$(darwin_TARGET_OS)" "1"
 475
 476 .PHONY: framework-pkg, framework-binary-dist
 477
 478 framework-pkg:
 479         $(MAKE) -C distrib/MacOS framework-pkg
 480
 481 framework-binary-dist:
 482         $(MAKE) -C distrib/MacOS framework-binary-dist
 483
 484 endif
 485
 486 # -----------------------------------------------------------------------------
 487 # Building source distributions
 488 #
 489 # Do it like this:
 490 #
 491 #       $ make
 492 #       $ make dist
 493 #
 494 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
 495 #
 496
 497 .PHONY: dist
 498
 499 #
 500 # Directory in which we're going to build the src dist
 501 #
 502 SRC_DIST_NAME=ghc-$(ProjectVersion)
 503 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 504
 505 #
 506 # Files to include in source distributions
 507 #
 508 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
 509 SRC_DIST_FILES += \
 510         configure.ac config.guess config.sub configure \
 511         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 512         ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot
 513
 514 # -----------------------------------------------------------------------------
 515 # Source distributions
 516
 517 # A source dist is built from a complete build tree, because we
 518 # require some extra files not contained in a darcs checkout: the
 519 # output from Happy and Alex, for example.
 520 #
 521 # The steps performed by 'make dist' are as follows:
 522 #   - create a complete link-tree of the current build tree in /tmp
 523 #   - run 'make distclean' on that tree
 524 #   - remove a bunch of other files that we know shouldn't be in the dist
 525 #   - tar up first the extralibs package, then the main source package
 526
 527 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
 528
 529 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
 530 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
 531
 532 VERSION :
 533         echo $(ProjectVersion) >VERSION
 534
 535 dist :: VERSION
 536
 537 dist ::
 538         $(RM) -rf $(SRC_DIST_DIR)
 539         $(RM) $(SRC_DIST_NAME).tar.gz
 540         mkdir $(SRC_DIST_DIR)
 541         ( cd $(SRC_DIST_DIR) \
 542           && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
 543           && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
 544           && $(MAKE) distclean \
 545           && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
 546           && $(RM) -rf compiler/stage[123] mk/build.mk \
 547           && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
 548         )
 549         tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
 550         $(RM) -rf $(EXTRA_LIBS)
 551         tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
 552
 553 # Upload the distribution(s)
 554 # Retrying is to work around buggy firewalls that corrupt large file transfers
 555 # over SSH.
 556 ifneq "$(PublishLocation)" ""
 557 dist ::
 558         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 559                 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
 560                 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
 561         done
 562         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 563                 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
 564                 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
 565         done
 566 endif
 567
 568 # -----------------------------------------------------------------------------
 569 # HC file bundles
 570
 571 hc-file-bundle :
 572         $(RM) -r ghc-$(ProjectVersion)
 573         $(LN_S) . ghc-$(ProjectVersion)
 574         $(FIND) ghc-$(ProjectVersion)/compiler \
 575              ghc-$(ProjectVersion)/utils \
 576              ghc-$(ProjectVersion)/libraries -follow \
 577           \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
 578         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
 579              if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
 580                 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
 581              fi; \
 582         done;
 583         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
 584              if test "x$$f" != "x"; then \
 585                 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
 586              fi; \
 587         done;
 588         echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
 589         echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
 590         echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
 591         echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
 592         echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
 593         tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
 594
 595 # -----------------------------------------------------------------------------
 596 # Cleaning
 597
 598 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
 599
 600 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
 601         docs/users_guide/ug-book.xml extra-gcc-opts
 602
 603 # don't clean config.mk: it's needed when cleaning stuff later on
 604 LATE_DIST_CLEAN_FILES += mk/config.mk
 605
 606 # VERSION is shipped in a source dist
 607 MAINTAINER_CLEAN_FILES += VERSION
 608
 609 extraclean::
 610         $(RM) -rf autom4te.cache
 611
 612 clean distclean ::
 613         $(MAKE) -C bindisttest $@
 614         if test -d testsuite; then $(MAKE) -C testsuite $@; fi
 615
 616 # -----------------------------------------------------------------------------
 617
 618 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
 619 NO_BOOT_TARGET=YES
 620 NO_ALL_TARGET=YES
 621 NO_INSTALL_TARGET=YES
 622
 623 include $(TOP)/mk/target.mk
 624
 625 # -----------------------------------------------------------------------------
 626