Makefile

   1 ############################################################################
   2 #
   3 #               This is the top-level Makefile for GHC
   4 #
   5 # Targets:
   6 #
   7 #       bootstrap (DEFAULT)
   8 #               Builds GHC, then builds the libraries,
   9 #               then uses this GHC ("stage 1") to build itself
  10 #               ("stage 2").
  11 #
  12 #       bootstrap2
  13 #               Same as bootstrap
  14 #
  15 #       bootstrap3
  16 #               bootstrap2 + we build GHC one more time ("stage 3")
  17 #
  18 #       stage1
  19 #               Just build up to stage 1
  20 #
  21 #       stage2
  22 #               Just build stage 2 (stage 1 must be built)
  23 #
  24 #       stage3
  25 #               Just build stage 3 (stage 2 must be built)
  26 #
  27 #       all
  28 #               Same as bootstrap
  29 #
  30 #       install
  31 #               Install everything, including stage 2 compiler by default
  32 #               (override with stage=3, for example).
  33 #
  34 #       dist
  35 #               Make a source dist (WARNING: runs 'make distclean' first)
  36 #
  37 #       binary-dist
  38 #               Builds a binary distribution
  39 #
  40 #       hc-file-bundle
  41 #               Builds an HC-file bundle, for bootstrapping
  42 #
  43 #       clean, distclean, maintainer-clean
  44 #               Increasing levels of cleanliness
  45 #
  46 ############################################################################
  47
  48 TOP=.
  49 include $(TOP)/mk/boilerplate.mk
  50
  51 #
  52 # Order is important! It's e.g. necessary to descend into include/
  53 # before the rest to have a config.h, etc.
  54 #
  55 # If we're booting from .hc files, swap the order
  56 # we descend into subdirs - to boot utils must be before driver.
  57 #
  58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
  59
  60 # We can't 'make boot' in libraries until stage1 is built
  61 ifeq "$(BootingFromHc)" "YES"
  62 SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver
  63 else
  64 SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts libraries/Cabal/doc
  65 endif
  66
  67 SUBDIRS = gmp includes compat utils driver docs rts libraries compiler libraries/Cabal/doc
  68
  69 # Sanity check that all the boot libraries are in the tree, to catch
  70 # failure to run darcs-all.
  71 check-packages :
  72         @ds=`cat libraries/boot-packages`;\
  73         for d in $$ds; do \
  74           if test ! -d libraries/$$d; then \
  75              echo "Looks like you're missing libraries/$$d,"; \
  76              echo "maybe you haven't done './darcs-all get'?"; \
  77              exit 1; \
  78           fi \
  79         done
  80         @if test ! -f libraries/base/configure; then \
  81             echo "Looks like you're missing base's configure script."; \
  82             echo "Did you run 'sh boot' at the top level?"; \
  83             exit 1; \
  84         fi
  85
  86 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
  87 ifneq "$(WhatGccIsCalled)" ""
  88 GCC_LIB_DEP = stamp.inplace-gcc-lib
  89 endif
  90 endif
  91
  92 stage1 : $(GCC_LIB_DEP) check-packages
  93         $(MAKE) -C utils/mkdependC boot
  94         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
  95         for i in $(SUBDIRS_BUILD); do \
  96           echo "------------------------------------------------------------------------"; \
  97           echo "== $(MAKE) boot $(MFLAGS);"; \
  98           echo " in $(shell pwd)/$$i"; \
  99           echo "------------------------------------------------------------------------"; \
 100           $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
 101           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 102         done; \
 103         for i in $(SUBDIRS_BUILD); do \
 104           echo "------------------------------------------------------------------------"; \
 105           echo "== $(MAKE) all $(MFLAGS);"; \
 106           echo " in $(shell pwd)/$$i"; \
 107           echo "------------------------------------------------------------------------"; \
 108           $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
 109           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 110         done
 111         $(MAKE) -C libraries boot
 112         $(MAKE) -C libraries all
 113
 114 stage2 : check-packages
 115         $(MAKE) -C compiler boot stage=2
 116         $(MAKE) -C compiler stage=2
 117
 118 stage3 : check-packages
 119         $(MAKE) -C compiler boot stage=3
 120         $(MAKE) -C compiler stage=3
 121
 122 bootstrap  : bootstrap2
 123
 124 bootstrap2 : stage1
 125         $(MAKE) stage2
 126
 127 bootstrap3 : bootstrap2
 128         $(MAKE) stage3
 129
 130 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 131 ifneq "$(WhatGccIsCalled)" ""
 132 all :: stamp.inplace-gcc-lib
 133
 134 .PHONY: stamp.inplace-gcc-lib
 135
 136 # This is a hack to make Cabal able to find ld when we run tests with
 137 # the inplace ghc. We should probably install all the gcc stuff in our
 138 # tree somewhere, and then have install copy it from there rather than
 139 # from the filesystem.
 140 stamp.inplace-gcc-lib:
 141         $(RM) -r compiler/gcc-lib
 142         mkdir compiler/gcc-lib
 143         cp $(LD) compiler/gcc-lib
 144         touch $@
 145
 146 clean ::
 147         $(RM) -r compiler/gcc-lib
 148         $(RM) -f inplace-gcc-lib
 149 endif
 150 endif
 151
 152 all :: bootstrap
 153
 154 # -----------------------------------------------------------------------------
 155 # Installing
 156
 157 # We want to install the stage 2 bootstrapped compiler by default, but we let
 158 # the user override this by saying 'make install stage=1', for example.
 159 ifeq "$(stage)" ""
 160 INSTALL_STAGE = stage=2
 161 else
 162 INSTALL_STAGE =
 163 endif
 164
 165 install-strip:
 166         $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
 167
 168 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
 169 install :: check-packages
 170         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 171         for i in $(SUBDIRS); do \
 172           echo "------------------------------------------------------------------------"; \
 173           echo "== $(MAKE) $@ $(MFLAGS);"; \
 174           echo " in $(shell pwd)/$$i"; \
 175           echo "------------------------------------------------------------------------"; \
 176           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 177           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 178         done
 179
 180 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 181 # These files need to be in the InstallShield
 182 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
 183 # in the top-level directory of the distribution
 184 INSTALL_DATAS += ANNOUNCE LICENSE README
 185 endif
 186
 187 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
 188 # and the perl interpreter and dll into the GHC prefix directory.
 189 # Gcc and Perl source locations derived from configuration data.
 190 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 191 ifneq "$(WhatGccIsCalled)" ""
 192 install ::
 193         -mkdir $(prefix)/gcc-lib
 194         -mkdir $(prefix)/include
 195         -mkdir $(prefix)/include/mingw
 196         -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
 197         -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 198         -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 199         -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
 200         -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
 201         -cp $(GccDir)gcc.exe $(prefix)
 202         -cp $(GccDir)as.exe $(prefix)/gcc-lib
 203         -cp $(GccDir)ld.exe $(prefix)/gcc-lib
 204         -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
 205         -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
 206         -cp $(GhcDir)../perl.exe $(prefix)
 207         -cp $(GhcDir)../perl56.dll $(prefix)
 208 endif
 209 endif
 210
 211 # Install gcc-extra-opts
 212 install ::
 213         $(INSTALL_DIR) $(DESTDIR)$(libdir)
 214         $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
 215
 216 install-docs ::
 217         @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
 218         for i in $(SUBDIRS); do \
 219           echo "------------------------------------------------------------------------"; \
 220           echo "== $(MAKE) $@ $(MFLAGS);"; \
 221           echo " in $(shell pwd)/$$i"; \
 222           echo "------------------------------------------------------------------------"; \
 223           $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
 224           if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ;  then true; else exit 1; fi; \
 225         done
 226
 227 # -----------------------------------------------------------------------------
 228 # Making a binary distribution
 229 #
 230 # `dist' `binary-dist'
 231 #      Create a distribution tar file for this program. The tar file
 232 #      should be set up so that the file names in the tar file start with
 233 #      a subdirectory name which is the name of the package it is a
 234 #      distribution for. This name can include the version number.
 235 #
 236 #      For example, the distribution tar file of GCC version 1.40 unpacks
 237 #      into a subdirectory named `gcc-1.40'.
 238 #
 239 #      The easiest way to do this is to create a subdirectory
 240 #      appropriately named, use ln or cp to install the proper files in
 241 #      it, and then tar that subdirectory.
 242 #
 243 #      The dist target should explicitly depend on all non-source files
 244 #      that are in the distribution, to make sure they are up to date in
 245 #      the distribution. See Making Releases.
 246 #
 247 #       binary-dist is a GHC addition for binary distributions
 248 #
 249
 250 binary-dist::
 251         -rm -rf $(BIN_DIST_DIR)
 252         -$(RM) $(BIN_DIST_DIR).tar.gz
 253
 254 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
 255
 256 binary-dist::
 257         $(MAKE) prefix=$(BIN_DIST_DIR) install
 258         $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
 259
 260 binary-dist::
 261         cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
 262
 263 binary-dist::
 264         $(MKDIRHIER) $(BIN_DIST_DIR)/icons
 265         cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
 266
 267 else
 268
 269 BinDistDirs = includes compiler docs rts
 270
 271 BIN_DIST_TOP= distrib/Makefile \
 272               distrib/configure-bin.ac \
 273               distrib/INSTALL \
 274               distrib/README \
 275               ANNOUNCE \
 276               LICENSE \
 277               install-sh \
 278               extra-gcc-opts.in \
 279               config.guess \
 280               config.sub   \
 281               aclocal.m4
 282
 283 ifeq "$(darwin_TARGET_OS)" "1"
 284 BIN_DIST_TOP+=mk/fix_install_names.sh
 285 endif
 286
 287 .PHONY: binary-dist-pre% binary-dist binary-pack
 288
 289 binary-dist:: binary-dist-pre
 290
 291 binary-dist-pre::
 292         $(MKDIRHIER) $(BIN_DIST_DIR)/mk
 293         echo 'include $$(TOP)/Makefile-vars' >  $(BIN_DIST_DIR)/mk/boilerplate.mk
 294         echo 'include $$(TOP)/mk/package.mk' >  $(BIN_DIST_DIR)/mk/target.mk
 295         echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 296         echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
 297         echo ''                              >  $(BIN_DIST_DIR)/mk/compat.mk
 298         cp mk/package.mk $(BIN_DIST_DIR)/mk/
 299         cp mk/install.mk $(BIN_DIST_DIR)/mk/
 300         cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
 301         cp mk/fptools.css $(BIN_DIST_DIR)/mk/
 302         $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
 303         $(MKDIRHIER) $(BIN_DIST_DIR)/share
 304
 305 binary-dist::
 306         $(MAKE) -C gmp       binary-dist DOING_BIN_DIST=YES
 307         $(MAKE) -C includes  binary-dist DOING_BIN_DIST=YES
 308         $(MAKE) -C compiler  binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
 309         $(MAKE) -C rts       binary-dist DOING_BIN_DIST=YES
 310         $(MAKE) -C driver    binary-dist DOING_BIN_DIST=YES
 311         $(MAKE) -C utils     binary-dist DOING_BIN_DIST=YES
 312         $(MAKE) -C docs      binary-dist DOING_BIN_DIST=YES
 313         $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
 314         $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
 315
 316 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
 317
 318 binary-dist::
 319         @for i in $(BIN_DIST_TOP); do \
 320           if test -f "$$i"; then \
 321              echo cp $$i $(BIN_DIST_DIR); \
 322              cp $$i $(BIN_DIST_DIR); \
 323           fi; \
 324         done;
 325         @echo "Configuring the Makefile for this project..."
 326         echo                                                         >  $(VARFILE)
 327         echo "package = ghc"                                         >> $(VARFILE)
 328         echo "version = $(ProjectVersion)"                           >> $(VARFILE)
 329         echo "ProjectVersion = $(ProjectVersion)"                    >> $(VARFILE)
 330         echo "HaveLibGmp = $(HaveLibGmp)"                            >> $(VARFILE)
 331         echo "GhcLibsWithUnix = $(GhcLibsWithUnix)"                  >> $(VARFILE)
 332         echo "GhcWithInterpreter = $(GhcWithInterpreter)"            >> $(VARFILE)
 333         echo "GhcHasReadline = $(GhcHasReadline)"                    >> $(VARFILE)
 334         echo "BootingFromHc = $(BootingFromHc)"                      >> $(VARFILE)
 335         echo "XMLDocWays = $(XMLDocWays)"                            >> $(VARFILE)
 336         # We won't actually use xsltproc, but we need to know if it's "" or not
 337         echo "XSLTPROC = $(XSLTPROC)"                                >> $(VARFILE)
 338         echo "TARGETPLATFORM = $(TARGETPLATFORM)"                    >> $(VARFILE)
 339         echo "HADDOCK_DOCS = $(HADDOCK_DOCS)"                        >> $(VARFILE)
 340
 341         cat distrib/Makefile-bin-vars.in                             >> $(VARFILE)
 342         @echo "Generating a shippable configure script.."
 343         $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
 344         ( cd $(BIN_DIST_DIR); autoreconf )
 345 endif
 346
 347 # Tar up the distribution and build a manifest
 348 binary-dist :: tar-binary-dist
 349
 350 .PHONY: tar-binary-dist
 351 tar-binary-dist:
 352         ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
 353         ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
 354
 355 PUBLISH_FILES = $(BIN_DIST_TARBALL)
 356
 357 # Upload the distribution and documentation
 358 ifneq "$(ISCC)" ""
 359 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
 360 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
 361
 362 PUBLISH_FILES += $(WINDOWS_INSTALLER)
 363
 364 binary-dist :: generate-windows-installer
 365
 366 .PHONY: generate-windows-installer
 367 generate-windows-installer ::
 368         $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
 369 endif
 370
 371 # Upload the distribution and documentation
 372 ifneq "$(PublishLocation)" ""
 373 publish :: publish-binary-dist
 374 endif
 375
 376 .PHONY: publish-binary-dist
 377 publish-binary-dist ::
 378         @for f in $(PUBLISH_FILES); do \
 379             for i in 0 1 2 3 4 5 6 7 8 9; do \
 380                 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
 381                 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
 382             done \
 383         done
 384
 385 # You need to first make binddisttest, and then run
 386 #     make publish 'prefix=$(BIN_DIST_INST_DIR)'
 387 # for this to find the right place.
 388
 389 # We assume that Windows means Cygwin, as we can't just use docdir
 390 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
 391 # the machine c.
 392
 393 ifeq "$(Windows)" "YES"
 394 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
 395 else
 396 PUBLISH_DOCDIR = $(docdir)
 397 endif
 398
 399 publish-binary-dist ::
 400         $(PublishCp) -r $(PUBLISH_DOCDIR)/* $(PublishLocation)/docs
 401
 402 binary-dist::
 403         @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
 404
 405 # -----------------------------------------------------------------------------
 406 # Building source distributions
 407 #
 408 # Do it like this:
 409 #
 410 #       $ make
 411 #       $ make dist
 412 #
 413 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
 414 #
 415
 416 .PHONY: dist
 417
 418 #
 419 # Directory in which we're going to build the src dist
 420 #
 421 SRC_DIST_NAME=ghc-$(ProjectVersion)
 422 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 423
 424 #
 425 # Files to include in source distributions
 426 #
 427 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
 428 SRC_DIST_FILES += \
 429         configure.ac config.guess config.sub configure \
 430         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 431         ghc.spec.in extra-gcc-opts.in VERSION boot
 432
 433 # -----------------------------------------------------------------------------
 434 # Source distributions
 435
 436 # A source dist is built from a complete build tree, because we
 437 # require some extra files not contained in a darcs checkout: the
 438 # output from Happy and Alex, for example.
 439 #
 440 # The steps performed by 'make dist' are as follows:
 441 #   - create a complete link-tree of the current build tree in /tmp
 442 #   - run 'make distclean' on that tree
 443 #   - remove a bunch of other files that we know shouldn't be in the dist
 444 #   - tar up first the extralibs package, then the main source package
 445
 446 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
 447
 448 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
 449 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
 450
 451 VERSION :
 452         echo $(ProjectVersion) >VERSION
 453
 454 dist :: VERSION
 455
 456 dist ::
 457         $(RM) -rf $(SRC_DIST_DIR)
 458         $(RM) $(SRC_DIST_NAME).tar.gz
 459         mkdir $(SRC_DIST_DIR)
 460         ( cd $(SRC_DIST_DIR) \
 461           && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
 462           && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
 463           && $(MAKE) distclean \
 464           && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
 465           && $(RM) -rf compiler/stage[123] mk/build.mk \
 466           && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
 467         )
 468         tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
 469         $(RM) -rf $(EXTRA_LIBS)
 470         tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
 471
 472 # Upload the distribution(s)
 473 # Retrying is to work around buggy firewalls that corrupt large file transfers
 474 # over SSH.
 475 ifneq "$(PublishLocation)" ""
 476 dist ::
 477         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 478                 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
 479                 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
 480         done
 481         @for i in 0 1 2 3 4 5 6 7 8 9; do \
 482                 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
 483                 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
 484         done
 485 endif
 486
 487 # -----------------------------------------------------------------------------
 488 # HC file bundles
 489
 490 hc-file-bundle :
 491         $(RM) -r ghc-$(ProjectVersion)
 492         $(LN_S) . ghc-$(ProjectVersion)
 493         $(FIND) ghc-$(ProjectVersion)/compiler \
 494              ghc-$(ProjectVersion)/utils \
 495              ghc-$(ProjectVersion)/compat \
 496              ghc-$(ProjectVersion)/libraries -follow \
 497           \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
 498         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
 499              if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
 500                 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
 501              fi; \
 502         done;
 503         for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
 504              if test "x$$f" != "x"; then \
 505                 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
 506              fi; \
 507         done;
 508         echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
 509         echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
 510         echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
 511         echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
 512         echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
 513         tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
 514
 515 # -----------------------------------------------------------------------------
 516 # Cleaning
 517
 518 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
 519
 520 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
 521         ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts
 522
 523 # don't clean config.mk: it's needed when cleaning stuff later on
 524 LATE_DIST_CLEAN_FILES += mk/config.mk
 525
 526 # VERSION is shipped in a source dist
 527 MAINTAINER_CLEAN_FILES += VERSION
 528
 529 extraclean::
 530         $(RM) -rf autom4te.cache
 531
 532 clean distclean ::
 533         $(MAKE) -C bindisttest $@
 534         if test -d testsuite; then $(MAKE) -C testsuite $@; fi
 535
 536 # -----------------------------------------------------------------------------
 537
 538 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
 539 NO_BOOT_TARGET=YES
 540 NO_ALL_TARGET=YES
 541 NO_INSTALL_TARGET=YES
 542
 543 include $(TOP)/mk/target.mk
 544
 545 # -----------------------------------------------------------------------------
 546