fix out-of-scope variable

[ghc-hetmet.git] / compiler / simplCore / Simplify.lhs

%
% (c) The AQUA Project, Glasgow University, 1993-1998
%
\section[Simplify]{The main module of the simplifier}

\begin{code}
module Simplify ( simplTopBinds, simplExpr ) where

#include "HsVersions.h"

import DynFlags ( dopt, DynFlag(Opt_D_dump_inlinings),
                          SimplifierSwitch(..)
                        )
import SimplMonad
import SimplEnv 
import SimplUtils       ( mkCase, mkLam, 
                          SimplCont(..), DupFlag(..), LetRhsFlag(..), 
                          mkRhsStop, mkBoringStop,  mkLazyArgStop, pushContArgs,
                          contResultType, countArgs, contIsDupable, contIsRhsOrArg,
                          getContArgs, interestingCallContext, interestingArg, isStrictType,
                          preInlineUnconditionally, postInlineUnconditionally, 
                          interestingArgContext, inlineMode, activeInline, activeRule
                        )
import Id               ( Id, idType, idInfo, idArity, isDataConWorkId, 
                          idUnfolding, setIdUnfolding, isDeadBinder,
                          idNewDemandInfo, setIdInfo, 
                          setIdOccInfo, zapLamIdInfo, setOneShotLambda
                        )
import MkId             ( eRROR_ID )
import Literal          ( mkStringLit )
import IdInfo           ( OccInfo(..), isLoopBreaker,
                          setArityInfo, zapDemandInfo,
                          setUnfoldingInfo, 
                          occInfo
                        )
import NewDemand        ( isStrictDmd )
import TcGadt           ( dataConCanMatch )
import DataCon          ( DataCon, dataConTyCon, dataConRepStrictness )
import TyCon            ( tyConArity, isAlgTyCon, isNewTyCon, tyConDataCons_maybe )
import CoreSyn
import PprCore          ( pprParendExpr, pprCoreExpr )
import CoreUnfold       ( mkUnfolding, callSiteInline )
import CoreUtils        ( exprIsDupable, exprIsTrivial, needsCaseBinding,
                          exprIsConApp_maybe, mkPiTypes, findAlt, 
                          exprType, exprIsHNF, findDefault, mergeAlts,
                          exprOkForSpeculation, exprArity, 
                          mkCoerce, mkSCC, mkInlineMe, applyTypeToArg
                        )
import Rules            ( lookupRule )
import BasicTypes       ( isMarkedStrict )
import CostCentre       ( currentCCS )
import Type             ( TvSubstEnv, isUnLiftedType, seqType, tyConAppArgs, funArgTy,
                          splitFunTy_maybe, splitFunTy, coreEqType, splitTyConApp_maybe,
                          isTyVarTy, mkTyVarTys, isFunTy, tcEqType
                        )
import Coercion         ( Coercion, coercionKind,
                          mkTransCoercion, mkLeftCoercion, mkRightCoercion, 
                          mkSymCoercion, splitCoercionKind_maybe, decomposeCo  )
import Var              ( tyVarKind, mkTyVar )
import VarEnv           ( elemVarEnv, emptyVarEnv )
import TysPrim          ( realWorldStatePrimTy )
import PrelInfo         ( realWorldPrimId )
import BasicTypes       ( TopLevelFlag(..), isTopLevel, 
                          RecFlag(..), isNonRec
                        )
import OrdList
import List             ( nub )
import Maybes           ( orElse )
import Outputable
import Util             ( notNull, filterOut )
\end{code}


The guts of the simplifier is in this module, but the driver loop for
the simplifier is in SimplCore.lhs.


-----------------------------------------
        *** IMPORTANT NOTE ***
-----------------------------------------
The simplifier used to guarantee that the output had no shadowing, but
it does not do so any more.   (Actually, it never did!)  The reason is
documented with simplifyArgs.


-----------------------------------------
        *** IMPORTANT NOTE ***
-----------------------------------------
Many parts of the simplifier return a bunch of "floats" as well as an
expression. This is wrapped as a datatype SimplUtils.FloatsWith.

All "floats" are let-binds, not case-binds, but some non-rec lets may
be unlifted (with RHS ok-for-speculation).



-----------------------------------------
        ORGANISATION OF FUNCTIONS
-----------------------------------------
simplTopBinds
  - simplify all top-level binders
  - for NonRec, call simplRecOrTopPair
  - for Rec,    call simplRecBind

        
        ------------------------------
simplExpr (applied lambda)      ==> simplNonRecBind
simplExpr (Let (NonRec ...) ..) ==> simplNonRecBind
simplExpr (Let (Rec ...)    ..) ==> simplify binders; simplRecBind

        ------------------------------
simplRecBind    [binders already simplfied]
  - use simplRecOrTopPair on each pair in turn

simplRecOrTopPair [binder already simplified]
  Used for: recursive bindings (top level and nested)
            top-level non-recursive bindings
  Returns: 
  - check for PreInlineUnconditionally
  - simplLazyBind

simplNonRecBind
  Used for: non-top-level non-recursive bindings
            beta reductions (which amount to the same thing)
  Because it can deal with strict arts, it takes a 
        "thing-inside" and returns an expression

  - check for PreInlineUnconditionally
  - simplify binder, including its IdInfo
  - if strict binding
        simplStrictArg
        mkAtomicArgs
        completeNonRecX
    else
        simplLazyBind
        addFloats

simplNonRecX:   [given a *simplified* RHS, but an *unsimplified* binder]
  Used for: binding case-binder and constr args in a known-constructor case
  - check for PreInLineUnconditionally
  - simplify binder
  - completeNonRecX
 
        ------------------------------
simplLazyBind:  [binder already simplified, RHS not]
  Used for: recursive bindings (top level and nested)
            top-level non-recursive bindings
            non-top-level, but *lazy* non-recursive bindings
        [must not be strict or unboxed]
  Returns floats + an augmented environment, not an expression
  - substituteIdInfo and add result to in-scope 
        [so that rules are available in rec rhs]
  - simplify rhs
  - mkAtomicArgs
  - float if exposes constructor or PAP
  - completeLazyBind


completeNonRecX:        [binder and rhs both simplified]
  - if the the thing needs case binding (unlifted and not ok-for-spec)
        build a Case
   else
        completeLazyBind
        addFloats

completeLazyBind:       [given a simplified RHS]
        [used for both rec and non-rec bindings, top level and not]
  - try PostInlineUnconditionally
  - add unfolding [this is the only place we add an unfolding]
  - add arity



Right hand sides and arguments
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In many ways we want to treat 
        (a) the right hand side of a let(rec), and 
        (b) a function argument
in the same way.  But not always!  In particular, we would
like to leave these arguments exactly as they are, so they
will match a RULE more easily.
        
        f (g x, h x)    
        g (+ x)

It's harder to make the rule match if we ANF-ise the constructor,
or eta-expand the PAP:

        f (let { a = g x; b = h x } in (a,b))
        g (\y. + x y)

On the other hand if we see the let-defns

        p = (g x, h x)
        q = + x

then we *do* want to ANF-ise and eta-expand, so that p and q
can be safely inlined.   

Even floating lets out is a bit dubious.  For let RHS's we float lets
out if that exposes a value, so that the value can be inlined more vigorously.
For example

        r = let x = e in (x,x)

Here, if we float the let out we'll expose a nice constructor. We did experiments
that showed this to be a generally good thing.  But it was a bad thing to float
lets out unconditionally, because that meant they got allocated more often.

For function arguments, there's less reason to expose a constructor (it won't
get inlined).  Just possibly it might make a rule match, but I'm pretty skeptical.
So for the moment we don't float lets out of function arguments either.


Eta expansion
~~~~~~~~~~~~~~
For eta expansion, we want to catch things like

        case e of (a,b) -> \x -> case a of (p,q) -> \y -> r

If the \x was on the RHS of a let, we'd eta expand to bring the two
lambdas together.  And in general that's a good thing to do.  Perhaps
we should eta expand wherever we find a (value) lambda?  Then the eta
expansion at a let RHS can concentrate solely on the PAP case.


%************************************************************************
%*                                                                      *
\subsection{Bindings}
%*                                                                      *
%************************************************************************

\begin{code}
simplTopBinds :: SimplEnv -> [InBind] -> SimplM [OutBind]

simplTopBinds env binds
  =     -- Put all the top-level binders into scope at the start
        -- so that if a transformation rule has unexpectedly brought
        -- anything into scope, then we don't get a complaint about that.
        -- It's rather as if the top-level binders were imported.
    simplRecBndrs env (bindersOfBinds binds)    `thenSmpl` \ (env, bndrs') -> 
    simpl_binds env binds bndrs'                `thenSmpl` \ (floats, _) ->
    freeTick SimplifierDone                     `thenSmpl_`
    returnSmpl (floatBinds floats)
  where
        -- We need to track the zapped top-level binders, because
        -- they should have their fragile IdInfo zapped (notably occurrence info)
        -- That's why we run down binds and bndrs' simultaneously.
    simpl_binds :: SimplEnv -> [InBind] -> [OutId] -> SimplM (FloatsWith ())
    simpl_binds env []           bs = ASSERT( null bs ) returnSmpl (emptyFloats env, ())
    simpl_binds env (bind:binds) bs = simpl_bind env bind bs            `thenSmpl` \ (floats,env) ->
                                      addFloats env floats              $ \env -> 
                                      simpl_binds env binds (drop_bs bind bs)

    drop_bs (NonRec _ _) (_ : bs) = bs
    drop_bs (Rec prs)    bs       = drop (length prs) bs

    simpl_bind env bind bs 
      = getDOptsSmpl                            `thenSmpl` \ dflags ->
        if dopt Opt_D_dump_inlinings dflags then
           pprTrace "SimplBind" (ppr (bindersOf bind)) $ simpl_bind1 env bind bs
        else
           simpl_bind1 env bind bs

    simpl_bind1 env (NonRec b r) (b':_) = simplRecOrTopPair env TopLevel b b' r
    simpl_bind1 env (Rec pairs)  bs'    = simplRecBind      env TopLevel pairs bs'
\end{code}


%************************************************************************
%*                                                                      *
\subsection{simplNonRec}
%*                                                                      *
%************************************************************************

simplNonRecBind is used for
  * non-top-level non-recursive lets in expressions
  * beta reduction

It takes 
  * An unsimplified (binder, rhs) pair
  * The env for the RHS.  It may not be the same as the
        current env because the bind might occur via (\x.E) arg

It uses the CPS form because the binding might be strict, in which
case we might discard the continuation:
        let x* = error "foo" in (...x...)

It needs to turn unlifted bindings into a @case@.  They can arise
from, say:      (\x -> e) (4# + 3#)

\begin{code}
simplNonRecBind :: SimplEnv
                -> InId                                 -- Binder
                -> InExpr -> SimplEnv                   -- Arg, with its subst-env
                -> OutType                              -- Type of thing computed by the context
                -> (SimplEnv -> SimplM FloatsWithExpr)  -- The body
                -> SimplM FloatsWithExpr
#ifdef DEBUG
simplNonRecBind env bndr rhs rhs_se cont_ty thing_inside
  | isTyVar bndr
  = pprPanic "simplNonRecBind" (ppr bndr <+> ppr rhs)
#endif

simplNonRecBind env bndr rhs rhs_se cont_ty thing_inside
  = simplNonRecBind' env bndr rhs rhs_se cont_ty thing_inside

simplNonRecBind' env bndr rhs rhs_se cont_ty thing_inside
  | preInlineUnconditionally env NotTopLevel bndr rhs
  = tick (PreInlineUnconditionally bndr)                `thenSmpl_`
    thing_inside (extendIdSubst env bndr (mkContEx rhs_se rhs))

  | isStrictDmd (idNewDemandInfo bndr) || isStrictType bndr_ty  -- A strict let
  =     -- Don't use simplBinder because that doesn't keep 
        -- fragile occurrence info in the substitution
    simplNonRecBndr env bndr                                    `thenSmpl` \ (env, bndr1) ->
    simplStrictArg AnRhs env rhs rhs_se (idType bndr1) cont_ty  $ \ env1 rhs1 ->

        -- Now complete the binding and simplify the body
    let
        (env2,bndr2) = addLetIdInfo env1 bndr bndr1
    in
    completeNonRecX env2 True {- strict -} bndr bndr2 rhs1 thing_inside

  | otherwise                                                   -- Normal, lazy case
  =     -- Don't use simplBinder because that doesn't keep 
        -- fragile occurrence info in the substitution
    simplNonRecBndr env bndr                            `thenSmpl` \ (env, bndr') ->
    simplLazyBind env NotTopLevel NonRecursive
                  bndr bndr' rhs rhs_se                 `thenSmpl` \ (floats, env) ->
    addFloats env floats thing_inside

  where
    bndr_ty = idType bndr
\end{code}

A specialised variant of simplNonRec used when the RHS is already simplified, notably
in knownCon.  It uses case-binding where necessary.

\begin{code}
simplNonRecX :: SimplEnv
             -> InId            -- Old binder
             -> OutExpr         -- Simplified RHS
             -> (SimplEnv -> SimplM FloatsWithExpr)
             -> SimplM FloatsWithExpr

simplNonRecX env bndr new_rhs thing_inside
  = do  { (env, bndr') <- simplBinder env bndr
        ; completeNonRecX env False {- Non-strict; pessimistic -} 
                          bndr bndr' new_rhs thing_inside }


completeNonRecX :: SimplEnv
                -> Bool                 -- Strict binding
                -> InId                 -- Old binder
                -> OutId                -- New binder
                -> OutExpr              -- Simplified RHS
                -> (SimplEnv -> SimplM FloatsWithExpr)
                -> SimplM FloatsWithExpr

completeNonRecX env is_strict old_bndr new_bndr new_rhs thing_inside
  | needsCaseBinding (idType new_bndr) new_rhs
        -- Make this test *before* the preInlineUnconditionally
        -- Consider     case I# (quotInt# x y) of 
        --                I# v -> let w = J# v in ...
        -- If we gaily inline (quotInt# x y) for v, we end up building an
        -- extra thunk:
        --                let w = J# (quotInt# x y) in ...
        -- because quotInt# can fail.
  = do  { (floats, body) <- thing_inside env
        ; let body' = wrapFloats floats body
        ; return (emptyFloats env, Case new_rhs new_bndr (exprType body) 
                                        [(DEFAULT, [], body')]) }

  | otherwise
  =     -- Make the arguments atomic if necessary, 
        -- adding suitable bindings
    -- pprTrace "completeNonRecX" (ppr new_bndr <+> ppr new_rhs) $
    mkAtomicArgsE env is_strict new_rhs         $ \ env new_rhs ->
    completeLazyBind env NotTopLevel
                     old_bndr new_bndr new_rhs  `thenSmpl` \ (floats, env) ->
    addFloats env floats thing_inside

{- No, no, no!  Do not try preInlineUnconditionally in completeNonRecX
   Doing so risks exponential behaviour, because new_rhs has been simplified once already
   In the cases described by the folowing commment, postInlineUnconditionally will 
   catch many of the relevant cases.
        -- This happens; for example, the case_bndr during case of
        -- known constructor:  case (a,b) of x { (p,q) -> ... }
        -- Here x isn't mentioned in the RHS, so we don't want to
        -- create the (dead) let-binding  let x = (a,b) in ...
        --
        -- Similarly, single occurrences can be inlined vigourously
        -- e.g.  case (f x, g y) of (a,b) -> ....
        -- If a,b occur once we can avoid constructing the let binding for them.
  | preInlineUnconditionally env NotTopLevel bndr new_rhs
  = thing_inside (extendIdSubst env bndr (DoneEx new_rhs))

  -- NB: completeLazyBind uses postInlineUnconditionally; no need to do that here
-}
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Lazy bindings}
%*                                                                      *
%************************************************************************

simplRecBind is used for
        * recursive bindings only

\begin{code}
simplRecBind :: SimplEnv -> TopLevelFlag
             -> [(InId, InExpr)] -> [OutId]
             -> SimplM (FloatsWith SimplEnv)
simplRecBind env top_lvl pairs bndrs'
  = go env pairs bndrs'         `thenSmpl` \ (floats, env) ->
    returnSmpl (flattenFloats floats, env)
  where
    go env [] _ = returnSmpl (emptyFloats env, env)
        
    go env ((bndr, rhs) : pairs) (bndr' : bndrs')
        = simplRecOrTopPair env top_lvl bndr bndr' rhs  `thenSmpl` \ (floats, env) ->
          addFloats env floats (\env -> go env pairs bndrs')
\end{code}


simplRecOrTopPair is used for
        * recursive bindings (whether top level or not)
        * top-level non-recursive bindings

It assumes the binder has already been simplified, but not its IdInfo.

\begin{code}
simplRecOrTopPair :: SimplEnv
                  -> TopLevelFlag
                  -> InId -> OutId              -- Binder, both pre-and post simpl
                  -> InExpr                     -- The RHS and its environment
                  -> SimplM (FloatsWith SimplEnv)

simplRecOrTopPair env top_lvl bndr bndr' rhs
  | preInlineUnconditionally env top_lvl bndr rhs       -- Check for unconditional inline
  = tick (PreInlineUnconditionally bndr)                `thenSmpl_`
    returnSmpl (emptyFloats env, extendIdSubst env bndr (mkContEx env rhs))

  | otherwise
  = simplLazyBind env top_lvl Recursive bndr bndr' rhs env
        -- May not actually be recursive, but it doesn't matter
\end{code}


simplLazyBind is used for
        * recursive bindings (whether top level or not)
        * top-level non-recursive bindings
        * non-top-level *lazy* non-recursive bindings

[Thus it deals with the lazy cases from simplNonRecBind, and all cases
from SimplRecOrTopBind]

Nota bene:
    1. It assumes that the binder is *already* simplified, 
       and is in scope, but not its IdInfo

    2. It assumes that the binder type is lifted.

    3. It does not check for pre-inline-unconditionallly;
       that should have been done already.

\begin{code}
simplLazyBind :: SimplEnv
              -> TopLevelFlag -> RecFlag
              -> InId -> OutId          -- Binder, both pre-and post simpl
              -> InExpr -> SimplEnv     -- The RHS and its environment
              -> SimplM (FloatsWith SimplEnv)

simplLazyBind env top_lvl is_rec bndr bndr1 rhs rhs_se
  = let 
        (env1,bndr2)      = addLetIdInfo env bndr bndr1
        rhs_env           = setInScope rhs_se env1
        is_top_level      = isTopLevel top_lvl
        ok_float_unlifted = not is_top_level && isNonRec is_rec
        rhs_cont          = mkRhsStop (idType bndr2)
    in
        -- Simplify the RHS; note the mkRhsStop, which tells 
        -- the simplifier that this is the RHS of a let.
    simplExprF rhs_env rhs rhs_cont             `thenSmpl` \ (floats, rhs1) ->

        -- If any of the floats can't be floated, give up now
        -- (The allLifted predicate says True for empty floats.)
    if (not ok_float_unlifted && not (allLifted floats)) then
        completeLazyBind env1 top_lvl bndr bndr2
                         (wrapFloats floats rhs1)
    else        

        -- ANF-ise a constructor or PAP rhs
    mkAtomicArgs False {- Not strict -} 
                 ok_float_unlifted rhs1                 `thenSmpl` \ (aux_binds, rhs2) ->

        -- If the result is a PAP, float the floats out, else wrap them
        -- By this time it's already been ANF-ised (if necessary)
    if isEmptyFloats floats && isNilOL aux_binds then   -- Shortcut a common case
        completeLazyBind env1 top_lvl bndr bndr2 rhs2

    else if is_top_level || exprIsTrivial rhs2 || exprIsHNF rhs2 then
        --      WARNING: long dodgy argument coming up
        --      WANTED: a better way to do this
        --              
        -- We can't use "exprIsCheap" instead of exprIsHNF, 
        -- because that causes a strictness bug.
        --         x = let y* = E in case (scc y) of { T -> F; F -> T}
        -- The case expression is 'cheap', but it's wrong to transform to
        --         y* = E; x = case (scc y) of {...}
        -- Either we must be careful not to float demanded non-values, or
        -- we must use exprIsHNF for the test, which ensures that the
        -- thing is non-strict.  So exprIsHNF => bindings are non-strict
        -- I think.  The WARN below tests for this.
        --
        -- We use exprIsTrivial here because we want to reveal lone variables.  
        -- E.g.  let { x = letrec { y = E } in y } in ...
        -- Here we definitely want to float the y=E defn. 
        -- exprIsHNF definitely isn't right for that.
        --
        -- Again, the floated binding can't be strict; if it's recursive it'll
        -- be non-strict; if it's non-recursive it'd be inlined.
        --
        -- Note [SCC-and-exprIsTrivial]
        -- If we have
        --      y = let { x* = E } in scc "foo" x
        -- then we do *not* want to float out the x binding, because
        -- it's strict!  Fortunately, exprIsTrivial replies False to
        -- (scc "foo" x).

                -- There's a subtlety here.  There may be a binding (x* = e) in the
                -- floats, where the '*' means 'will be demanded'.  So is it safe
                -- to float it out?  Answer no, but it won't matter because
                -- we only float if (a) arg' is a WHNF, or (b) it's going to top level
                -- and so there can't be any 'will be demanded' bindings in the floats.
                -- Hence the warning
        WARN( not (is_top_level || not (any demanded_float (floatBinds floats))), 
              ppr (filter demanded_float (floatBinds floats)) )

        tick LetFloatFromLet                    `thenSmpl_` (
        addFloats env1 floats                   $ \ env2 ->
        addAtomicBinds env2 (fromOL aux_binds)  $ \ env3 ->
        completeLazyBind env3 top_lvl bndr bndr2 rhs2)

    else
        completeLazyBind env1 top_lvl bndr bndr2 (wrapFloats floats rhs1)

#ifdef DEBUG
demanded_float (NonRec b r) = isStrictDmd (idNewDemandInfo b) && not (isUnLiftedType (idType b))
                -- Unlifted-type (cheap-eagerness) lets may well have a demanded flag on them
demanded_float (Rec _)      = False
#endif
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Completing a lazy binding}
%*                                                                      *
%************************************************************************

completeLazyBind
        * deals only with Ids, not TyVars
        * takes an already-simplified binder and RHS
        * is used for both recursive and non-recursive bindings
        * is used for both top-level and non-top-level bindings

It does the following:
  - tries discarding a dead binding
  - tries PostInlineUnconditionally
  - add unfolding [this is the only place we add an unfolding]
  - add arity

It does *not* attempt to do let-to-case.  Why?  Because it is used for
        - top-level bindings (when let-to-case is impossible) 
        - many situations where the "rhs" is known to be a WHNF
                (so let-to-case is inappropriate).

\begin{code}
completeLazyBind :: SimplEnv
                 -> TopLevelFlag        -- Flag stuck into unfolding
                 -> InId                -- Old binder
                 -> OutId               -- New binder
                 -> OutExpr             -- Simplified RHS
                 -> SimplM (FloatsWith SimplEnv)
-- We return a new SimplEnv, because completeLazyBind may choose to do its work
-- by extending the substitution (e.g. let x = y in ...)
-- The new binding (if any) is returned as part of the floats.
-- NB: the returned SimplEnv has the right SubstEnv, but you should
--     (as usual) use the in-scope-env from the floats

completeLazyBind env top_lvl old_bndr new_bndr new_rhs
  | postInlineUnconditionally env top_lvl new_bndr occ_info new_rhs unfolding
  =             -- Drop the binding
    tick (PostInlineUnconditionally old_bndr)   `thenSmpl_`
    -- pprTrace "Inline unconditionally" (ppr old_bndr <+> ppr new_bndr <+> ppr new_rhs) $
    returnSmpl (emptyFloats env, extendIdSubst env old_bndr (DoneEx new_rhs))
                -- Use the substitution to make quite, quite sure that the substitution
                -- will happen, since we are going to discard the binding

  |  otherwise
  = let
                -- Add arity info
        new_bndr_info = idInfo new_bndr `setArityInfo` exprArity new_rhs

        -- Add the unfolding *only* for non-loop-breakers
        -- Making loop breakers not have an unfolding at all 
        -- means that we can avoid tests in exprIsConApp, for example.
        -- This is important: if exprIsConApp says 'yes' for a recursive
        -- thing, then we can get into an infinite loop

        -- If the unfolding is a value, the demand info may
        -- go pear-shaped, so we nuke it.  Example:
        --      let x = (a,b) in
        --      case x of (p,q) -> h p q x
        -- Here x is certainly demanded. But after we've nuked
        -- the case, we'll get just
        --      let x = (a,b) in h a b x
        -- and now x is not demanded (I'm assuming h is lazy)
        -- This really happens.  Similarly
        --      let f = \x -> e in ...f..f...
        -- After inling f at some of its call sites the original binding may
        -- (for example) be no longer strictly demanded.
        -- The solution here is a bit ad hoc...
        info_w_unf = new_bndr_info `setUnfoldingInfo` unfolding
        final_info | loop_breaker               = new_bndr_info
                   | isEvaldUnfolding unfolding = zapDemandInfo info_w_unf `orElse` info_w_unf
                   | otherwise                  = info_w_unf

        final_id = new_bndr `setIdInfo` final_info
    in
                -- These seqs forces the Id, and hence its IdInfo,
                -- and hence any inner substitutions
    final_id                                    `seq`
    -- pprTrace "Binding" (ppr final_id <+> ppr unfolding) $
    returnSmpl (unitFloat env final_id new_rhs, env)

  where 
    unfolding    = mkUnfolding (isTopLevel top_lvl) new_rhs
    loop_breaker = isLoopBreaker occ_info
    old_info     = idInfo old_bndr
    occ_info     = occInfo old_info
\end{code}    



%************************************************************************
%*                                                                      *
\subsection[Simplify-simplExpr]{The main function: simplExpr}
%*                                                                      *
%************************************************************************

The reason for this OutExprStuff stuff is that we want to float *after*
simplifying a RHS, not before.  If we do so naively we get quadratic
behaviour as things float out.

To see why it's important to do it after, consider this (real) example:

        let t = f x
        in fst t
==>
        let t = let a = e1
                    b = e2
                in (a,b)
        in fst t
==>
        let a = e1
            b = e2
            t = (a,b)
        in
        a       -- Can't inline a this round, cos it appears twice
==>
        e1

Each of the ==> steps is a round of simplification.  We'd save a
whole round if we float first.  This can cascade.  Consider

        let f = g d
        in \x -> ...f...
==>
        let f = let d1 = ..d.. in \y -> e
        in \x -> ...f...
==>
        let d1 = ..d..
        in \x -> ...(\y ->e)...

Only in this second round can the \y be applied, and it 
might do the same again.


\begin{code}
simplExpr :: SimplEnv -> CoreExpr -> SimplM CoreExpr
simplExpr env expr = simplExprC env expr (mkBoringStop expr_ty')
                   where
                     expr_ty' = substTy env (exprType expr)
        -- The type in the Stop continuation, expr_ty', is usually not used
        -- It's only needed when discarding continuations after finding
        -- a function that returns bottom.
        -- Hence the lazy substitution


simplExprC :: SimplEnv -> CoreExpr -> SimplCont -> SimplM CoreExpr
        -- Simplify an expression, given a continuation
simplExprC env expr cont 
  = simplExprF env expr cont    `thenSmpl` \ (floats, expr) ->
    returnSmpl (wrapFloats floats expr)

simplExprF :: SimplEnv -> InExpr -> SimplCont -> SimplM FloatsWithExpr
        -- Simplify an expression, returning floated binds

simplExprF env (Var v)          cont = simplVar env v cont
simplExprF env (Lit lit)        cont = rebuild env (Lit lit) cont
simplExprF env expr@(Lam _ _)   cont = simplLam env expr cont
simplExprF env (Note note expr) cont = simplNote env note expr cont
simplExprF env (Cast body co)   cont = simplCast env body co cont
simplExprF env (App fun arg)    cont = simplExprF env fun 
                                         (ApplyTo NoDup arg (Just env) cont)

simplExprF env (Type ty) cont
  = ASSERT( contIsRhsOrArg cont )
    simplType env ty                    `thenSmpl` \ ty' ->
    rebuild env (Type ty') cont

simplExprF env (Case scrut bndr case_ty alts) cont
  | not (switchIsOn (getSwitchChecker env) NoCaseOfCase)
  =     -- Simplify the scrutinee with a Select continuation
    simplExprF env scrut (Select NoDup bndr alts env cont)

  | otherwise
  =     -- If case-of-case is off, simply simplify the case expression
        -- in a vanilla Stop context, and rebuild the result around it
    simplExprC env scrut case_cont      `thenSmpl` \ case_expr' ->
    rebuild env case_expr' cont
  where
    case_cont = Select NoDup bndr alts env (mkBoringStop case_ty')
    case_ty'  = substTy env case_ty     -- c.f. defn of simplExpr

simplExprF env (Let (Rec pairs) body) cont
  = simplRecBndrs env (map fst pairs)           `thenSmpl` \ (env, bndrs') -> 
        -- NB: bndrs' don't have unfoldings or rules
        -- We add them as we go down

    simplRecBind env NotTopLevel pairs bndrs'   `thenSmpl` \ (floats, env) ->
    addFloats env floats                        $ \ env ->
    simplExprF env body cont

-- A non-recursive let is dealt with by simplNonRecBind
simplExprF env (Let (NonRec bndr rhs) body) cont
  = simplNonRecBind env bndr rhs env (contResultType cont)      $ \ env ->
    simplExprF env body cont


---------------------------------
simplType :: SimplEnv -> InType -> SimplM OutType
        -- Kept monadic just so we can do the seqType
simplType env ty
  = seqType new_ty   `seq`   returnSmpl new_ty
  where
    new_ty = substTy env ty
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Lambdas}
%*                                                                      *
%************************************************************************

\begin{code}
simplCast :: SimplEnv -> InExpr -> Coercion -> SimplCont -> SimplM FloatsWithExpr
simplCast env body co cont
  = let
       addCoerce co cont 
         | (s1, k1) <- coercionKind co
         , s1 `tcEqType` k1 = cont
       addCoerce co1 (CoerceIt co2 cont)
         | (s1, k1) <- coercionKind co1
         , (l1, t1) <- coercionKind co2
                --      coerce T1 S1 (coerce S1 K1 e)
                -- ==>
                --      e,                      if T1=K1
                --      coerce T1 K1 e,         otherwise
                --
                -- For example, in the initial form of a worker
                -- we may find  (coerce T (coerce S (\x.e))) y
                -- and we'd like it to simplify to e[y/x] in one round 
                -- of simplification
         , s1 `coreEqType` t1  = cont            -- The coerces cancel out  
         | otherwise           = CoerceIt (mkTransCoercion co1 co2) cont
    
       addCoerce co (ApplyTo dup arg arg_se cont)
         | not (isTypeArg arg)    -- This whole case only works for value args
                                -- Could upgrade to have equiv thing for type apps too  
         , Just (s1s2, t1t2) <- splitCoercionKind_maybe co
         , isFunTy s1s2
                -- co : s1s2 :=: t1t2
                --      (coerce (T1->T2) (S1->S2) F) E
                -- ===> 
                --      coerce T2 S2 (F (coerce S1 T1 E))
                --
                -- t1t2 must be a function type, T1->T2, because it's applied
                -- to something but s1s2 might conceivably not be
                --
                -- When we build the ApplyTo we can't mix the out-types
                -- with the InExpr in the argument, so we simply substitute
                -- to make it all consistent.  It's a bit messy.
                -- But it isn't a common case.
         = result
         where
           -- we split coercion t1->t2 :=: s1->s2 into t1 :=: s1 and 
           -- t2 :=: s2 with left and right on the curried form: 
           --    (->) t1 t2 :=: (->) s1 s2
           [co1, co2] = decomposeCo 2 co
           new_arg    = mkCoerce (mkSymCoercion co1) (substExpr arg_env arg)
           arg_env    = setInScope arg_se env
           result     = ApplyTo dup new_arg (zapSubstEnv env) (addCoerce co2 cont)
       addCoerce co cont = CoerceIt co cont
    in
    simplType env co            `thenSmpl` \ co' ->
    simplExprF env body (addCoerce co' cont)
\end{code}

%************************************************************************
%*                                                                      *
\subsection{Lambdas}
%*                                                                      *
%************************************************************************

\begin{code}
simplLam env fun cont
  = go env fun cont
  where
    zap_it  = mkLamBndrZapper fun (countArgs cont)
    cont_ty = contResultType cont

        -- Type-beta reduction
    go env (Lam bndr body) (ApplyTo _ (Type ty_arg) mb_arg_se body_cont)
      = ASSERT( isTyVar bndr )
        do { tick (BetaReduction bndr)
           ; ty_arg' <- case mb_arg_se of
                          Just arg_se -> simplType (setInScope arg_se env) ty_arg
                          Nothing     -> return ty_arg
           ; go (extendTvSubst env bndr ty_arg') body body_cont }

        -- Ordinary beta reduction
    go env (Lam bndr body) cont@(ApplyTo _ arg (Just arg_se) body_cont)
      = do { tick (BetaReduction bndr)  
           ; simplNonRecBind env (zap_it bndr) arg arg_se cont_ty       $ \ env -> 
             go env body body_cont }

    go env (Lam bndr body) cont@(ApplyTo _ arg Nothing body_cont)
      = do { tick (BetaReduction bndr)  
           ; simplNonRecX env (zap_it bndr) arg         $ \ env -> 
             go env body body_cont }

        -- Not enough args, so there are real lambdas left to put in the result
    go env lam@(Lam _ _) cont
      = do { (env, bndrs') <- simplLamBndrs env bndrs
           ; body' <- simplExpr env body
           ; (floats, new_lam) <- mkLam env bndrs' body' cont
           ; addFloats env floats               $ \ env -> 
             rebuild env new_lam cont }
      where
        (bndrs,body) = collectBinders lam

        -- Exactly enough args
    go env expr cont = simplExprF env expr cont

mkLamBndrZapper :: CoreExpr     -- Function
                -> Int          -- Number of args supplied, *including* type args
                -> Id -> Id     -- Use this to zap the binders
mkLamBndrZapper fun n_args
  | n_args >= n_params fun = \b -> b            -- Enough args
  | otherwise              = \b -> zapLamIdInfo b
  where
        -- NB: we count all the args incl type args
        -- so we must count all the binders (incl type lambdas)
    n_params (Note _ e) = n_params e
    n_params (Lam b e)  = 1 + n_params e
    n_params other      = 0::Int
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Notes}
%*                                                                      *
%************************************************************************

\begin{code}

                
-- Hack: we only distinguish subsumed cost centre stacks for the purposes of
-- inlining.  All other CCCSs are mapped to currentCCS.
simplNote env (SCC cc) e cont
  = simplExpr (setEnclosingCC env currentCCS) e         `thenSmpl` \ e' ->
    rebuild env (mkSCC cc e') cont

-- See notes with SimplMonad.inlineMode
simplNote env InlineMe e cont
  | contIsRhsOrArg cont         -- Totally boring continuation; see notes above
  =                             -- Don't inline inside an INLINE expression
    simplExpr (setMode inlineMode env )  e      `thenSmpl` \ e' ->
    rebuild env (mkInlineMe e') cont

  | otherwise   -- Dissolve the InlineMe note if there's
                -- an interesting context of any kind to combine with
                -- (even a type application -- anything except Stop)
  = simplExprF env e cont

simplNote env (CoreNote s) e cont
  = simplExpr env e    `thenSmpl` \ e' ->
    rebuild env (Note (CoreNote s) e') cont
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Dealing with calls}
%*                                                                      *
%************************************************************************

\begin{code}
simplVar env var cont
  = case substId env var of
        DoneEx e         -> simplExprF (zapSubstEnv env) e cont
        ContEx tvs ids e -> simplExprF (setSubstEnv env tvs ids) e cont
        DoneId var1 occ  -> completeCall (zapSubstEnv env) var1 occ cont
                -- Note [zapSubstEnv]
                -- The template is already simplified, so don't re-substitute.
                -- This is VITAL.  Consider
                --      let x = e in
                --      let y = \z -> ...x... in
                --      \ x -> ...y...
                -- We'll clone the inner \x, adding x->x' in the id_subst
                -- Then when we inline y, we must *not* replace x by x' in
                -- the inlined copy!!

---------------------------------------------------------
--      Dealing with a call site

completeCall env var occ_info cont
  =     -- Simplify the arguments
    getDOptsSmpl                                        `thenSmpl` \ dflags ->
    let
        chkr              = getSwitchChecker env
        (args, call_cont) = getContArgs chkr var cont
        fn_ty             = idType var
    in
    simplifyArgs env fn_ty (interestingArgContext var call_cont) args 
                 (contResultType call_cont)     $ \ env args ->

        -- Next, look for rules or specialisations that match
        --
        -- It's important to simplify the args first, because the rule-matcher
        -- doesn't do substitution as it goes.  We don't want to use subst_args
        -- (defined in the 'where') because that throws away useful occurrence info,
        -- and perhaps-very-important specialisations.
        --
        -- Some functions have specialisations *and* are strict; in this case,
        -- we don't want to inline the wrapper of the non-specialised thing; better
        -- to call the specialised thing instead.
        -- We used to use the black-listing mechanism to ensure that inlining of 
        -- the wrapper didn't occur for things that have specialisations till a 
        -- later phase, so but now we just try RULES first
        --
        -- You might think that we shouldn't apply rules for a loop breaker: 
        -- doing so might give rise to an infinite loop, because a RULE is
        -- rather like an extra equation for the function:
        --      RULE:           f (g x) y = x+y
        --      Eqn:            f a     y = a-y
        --
        -- But it's too drastic to disable rules for loop breakers.  
        -- Even the foldr/build rule would be disabled, because foldr 
        -- is recursive, and hence a loop breaker:
        --      foldr k z (build g) = g k z
        -- So it's up to the programmer: rules can cause divergence

    let
        in_scope   = getInScope env
        rules      = getRules env
        maybe_rule = case activeRule env of
                        Nothing     -> Nothing  -- No rules apply
                        Just act_fn -> lookupRule act_fn in_scope rules var args 
    in
    case maybe_rule of {
        Just (rule_name, rule_rhs) -> 
                tick (RuleFired rule_name)                      `thenSmpl_`
                (if dopt Opt_D_dump_inlinings dflags then
                   pprTrace "Rule fired" (vcat [
                        text "Rule:" <+> ftext rule_name,
                        text "Before:" <+> ppr var <+> sep (map pprParendExpr args),
                        text "After: " <+> pprCoreExpr rule_rhs,
                        text "Cont:  " <+> ppr call_cont])
                 else
                        id)             $
                simplExprF env rule_rhs call_cont ;
        
        Nothing ->              -- No rules

        -- Next, look for an inlining
    let
        arg_infos = [ interestingArg arg | arg <- args, isValArg arg]
        interesting_cont = interestingCallContext (notNull args)
                                                  (notNull arg_infos)
                                                  call_cont
        active_inline = activeInline env var occ_info
        maybe_inline  = callSiteInline dflags active_inline occ_info
                                       var arg_infos interesting_cont
    in
    case maybe_inline of {
        Just unfolding          -- There is an inlining!
          ->  tick (UnfoldingDone var)          `thenSmpl_`
                (if dopt Opt_D_dump_inlinings dflags then
                   pprTrace "Inlining done" (vcat [
                        text "Before:" <+> ppr var <+> sep (map pprParendExpr args),
                        text "Inlined fn: " <+> ppr unfolding,
                        text "Cont:  " <+> ppr call_cont])
                 else
                        id)             $
              simplExprF env unfolding (pushContArgs args call_cont)

        ;
        Nothing ->              -- No inlining!

        -- Done
    rebuild env (mkApps (Var var) args) call_cont
    }}
\end{code}

%************************************************************************
%*                                                                      *
\subsection{Arguments}
%*                                                                      *
%************************************************************************

\begin{code}
---------------------------------------------------------
--      Simplifying the arguments of a call

simplifyArgs :: SimplEnv 
             -> OutType                         -- Type of the function
             -> Bool                            -- True if the fn has RULES
             -> [(InExpr, Maybe SimplEnv, Bool)] -- Details of the arguments
             -> OutType                         -- Type of the continuation
             -> (SimplEnv -> [OutExpr] -> SimplM FloatsWithExpr)
             -> SimplM FloatsWithExpr

-- [CPS-like because of strict arguments]

-- Simplify the arguments to a call.
-- This part of the simplifier may break the no-shadowing invariant
-- Consider
--      f (...(\a -> e)...) (case y of (a,b) -> e')
-- where f is strict in its second arg
-- If we simplify the innermost one first we get (...(\a -> e)...)
-- Simplifying the second arg makes us float the case out, so we end up with
--      case y of (a,b) -> f (...(\a -> e)...) e'
-- So the output does not have the no-shadowing invariant.  However, there is
-- no danger of getting name-capture, because when the first arg was simplified
-- we used an in-scope set that at least mentioned all the variables free in its
-- static environment, and that is enough.
--
-- We can't just do innermost first, or we'd end up with a dual problem:
--      case x of (a,b) -> f e (...(\a -> e')...)
--
-- I spent hours trying to recover the no-shadowing invariant, but I just could
-- not think of an elegant way to do it.  The simplifier is already knee-deep in
-- continuations.  We have to keep the right in-scope set around; AND we have
-- to get the effect that finding (error "foo") in a strict arg position will
-- discard the entire application and replace it with (error "foo").  Getting
-- all this at once is TOO HARD!

simplifyArgs env fn_ty has_rules args cont_ty thing_inside
  = go env fn_ty args thing_inside
  where
    go env fn_ty []         thing_inside = thing_inside env []
    go env fn_ty (arg:args) thing_inside = simplifyArg env fn_ty has_rules arg cont_ty  $ \ env arg' ->
                                           go env (applyTypeToArg fn_ty arg') args      $ \ env args' ->
                                           thing_inside env (arg':args')

simplifyArg env fn_ty has_rules (arg, Nothing, _) cont_ty thing_inside
  = thing_inside env arg        -- Already simplified

simplifyArg env fn_ty has_rules (Type ty_arg, Just se, _) cont_ty thing_inside
  = simplType (setInScope se env) ty_arg        `thenSmpl` \ new_ty_arg ->
    thing_inside env (Type new_ty_arg)

simplifyArg env fn_ty has_rules (val_arg, Just arg_se, is_strict) cont_ty thing_inside 
  | is_strict 
  = simplStrictArg AnArg env val_arg arg_se arg_ty cont_ty thing_inside

  | otherwise   -- Lazy argument
                -- DO NOT float anything outside, hence simplExprC
                -- There is no benefit (unlike in a let-binding), and we'd
                -- have to be very careful about bogus strictness through 
                -- floating a demanded let.
  = simplExprC (setInScope arg_se env) val_arg
               (mkLazyArgStop arg_ty has_rules)         `thenSmpl` \ arg1 ->
    thing_inside env arg1
  where
    arg_ty = funArgTy fn_ty


simplStrictArg ::  LetRhsFlag
                -> SimplEnv             -- The env of the call
                -> InExpr -> SimplEnv   -- The arg plus its env
                -> OutType              -- arg_ty: type of the argument
                -> OutType              -- cont_ty: Type of thing computed by the context
                -> (SimplEnv -> OutExpr -> SimplM FloatsWithExpr)       
                                        -- Takes an expression of type rhs_ty, 
                                        -- returns an expression of type cont_ty
                                        -- The env passed to this continuation is the
                                        -- env of the call, plus any new in-scope variables
                -> SimplM FloatsWithExpr        -- An expression of type cont_ty

simplStrictArg is_rhs call_env arg arg_env arg_ty cont_ty thing_inside
  = simplExprF (setInScope arg_env call_env) arg
               (ArgOf is_rhs arg_ty cont_ty (\ new_env -> thing_inside (setInScope call_env new_env)))
  -- Notice the way we use arg_env (augmented with in-scope vars from call_env) 
  --    to simplify the argument
  -- and call-env (augmented with in-scope vars from the arg) to pass to the continuation
\end{code}


%************************************************************************
%*                                                                      *
\subsection{mkAtomicArgs}
%*                                                                      *
%************************************************************************

mkAtomicArgs takes a putative RHS, checks whether it's a PAP or
constructor application and, if so, converts it to ANF, so that the 
resulting thing can be inlined more easily.  Thus
        x = (f a, g b)
becomes
        t1 = f a
        t2 = g b
        x = (t1,t2)

There are three sorts of binding context, specified by the two
boolean arguments

Strict
   OK-unlifted

N  N    Top-level or recursive                  Only bind args of lifted type

N  Y    Non-top-level and non-recursive,        Bind args of lifted type, or
                but lazy                        unlifted-and-ok-for-speculation

Y  Y    Non-top-level, non-recursive,           Bind all args
                 and strict (demanded)
        

For example, given

        x = MkC (y div# z)

there is no point in transforming to

        x = case (y div# z) of r -> MkC r

because the (y div# z) can't float out of the let. But if it was
a *strict* let, then it would be a good thing to do.  Hence the
context information.

\begin{code}
mkAtomicArgsE :: SimplEnv 
              -> Bool   -- A strict binding
              -> OutExpr                                                -- The rhs
              -> (SimplEnv -> OutExpr -> SimplM FloatsWithExpr)
              -> SimplM FloatsWithExpr

mkAtomicArgsE env is_strict rhs thing_inside
  | (Var fun, args) <- collectArgs rhs,                         -- It's an application
    isDataConWorkId fun || valArgCount args < idArity fun       -- And it's a constructor or PAP
  = go env (Var fun) args

  | otherwise = thing_inside env rhs

  where
    go env fun [] = thing_inside env fun

    go env fun (arg : args) 
        |  exprIsTrivial arg    -- Easy case
        || no_float_arg         -- Can't make it atomic
        = go env (App fun arg) args

        | otherwise
        = do { arg_id <- newId FSLIT("a") arg_ty
             ; completeNonRecX env False {- pessimistic -} arg_id arg_id arg $ \env ->
               go env (App fun (Var arg_id)) args }
        where
          arg_ty = exprType arg
          no_float_arg = not is_strict && (isUnLiftedType arg_ty) && not (exprOkForSpeculation arg)


-- Old code: consider rewriting to be more like mkAtomicArgsE

mkAtomicArgs :: Bool    -- A strict binding
             -> Bool    -- OK to float unlifted args
             -> OutExpr
             -> SimplM (OrdList (OutId,OutExpr),  -- The floats (unusually) may include
                        OutExpr)                  -- things that need case-binding,
                                                  -- if the strict-binding flag is on

mkAtomicArgs is_strict ok_float_unlifted rhs
  | (Var fun, args) <- collectArgs rhs,                         -- It's an application
    isDataConWorkId fun || valArgCount args < idArity fun       -- And it's a constructor or PAP
  = go fun nilOL [] args        -- Have a go

  | otherwise = bale_out        -- Give up

  where
    bale_out = returnSmpl (nilOL, rhs)

    go fun binds rev_args [] 
        = returnSmpl (binds, mkApps (Var fun) (reverse rev_args))

    go fun binds rev_args (arg : args) 
        | exprIsTrivial arg     -- Easy case
        = go fun binds (arg:rev_args) args

        | not can_float_arg     -- Can't make this arg atomic
        = bale_out              -- ... so give up

        | otherwise     -- Don't forget to do it recursively
                        -- E.g.  x = a:b:c:[]
        =  mkAtomicArgs is_strict ok_float_unlifted arg `thenSmpl` \ (arg_binds, arg') ->
           newId FSLIT("a") arg_ty                      `thenSmpl` \ arg_id ->
           go fun ((arg_binds `snocOL` (arg_id,arg')) `appOL` binds) 
              (Var arg_id : rev_args) args
        where
          arg_ty        = exprType arg
          can_float_arg =  is_strict 
                        || not (isUnLiftedType arg_ty)
                        || (ok_float_unlifted && exprOkForSpeculation arg)


addAtomicBinds :: SimplEnv -> [(OutId,OutExpr)]
               -> (SimplEnv -> SimplM (FloatsWith a))
               -> SimplM (FloatsWith a)
addAtomicBinds env []         thing_inside = thing_inside env
addAtomicBinds env ((v,r):bs) thing_inside = addAuxiliaryBind env (NonRec v r) $ \ env -> 
                                             addAtomicBinds env bs thing_inside
\end{code}


%************************************************************************
%*                                                                      *
\subsection{The main rebuilder}
%*                                                                      *
%************************************************************************

\begin{code}
rebuild :: SimplEnv -> OutExpr -> SimplCont -> SimplM FloatsWithExpr

rebuild env expr (Stop _ _ _)                 = rebuildDone env expr
rebuild env expr (ArgOf _ _ _ cont_fn)        = cont_fn env expr
rebuild env expr (CoerceIt co cont)           = rebuild env (mkCoerce co expr) cont
rebuild env expr (Select _ bndr alts se cont) = rebuildCase (setInScope se env) expr bndr alts cont
rebuild env expr (ApplyTo _ arg mb_se cont)   = rebuildApp  env expr arg mb_se cont

rebuildApp env fun arg mb_se cont
  = do  { arg' <- simplArg env arg mb_se
        ; rebuild env (App fun arg') cont }

simplArg :: SimplEnv -> CoreExpr -> Maybe SimplEnv -> SimplM CoreExpr
simplArg env arg Nothing        = return arg    -- The arg is already simplified
simplArg env arg (Just arg_env) = simplExpr (setInScope arg_env env) arg

rebuildDone env expr = returnSmpl (emptyFloats env, expr)
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Functions dealing with a case}
%*                                                                      *
%************************************************************************

Blob of helper functions for the "case-of-something-else" situation.

\begin{code}
---------------------------------------------------------
--      Eliminate the case if possible

rebuildCase :: SimplEnv
            -> OutExpr          -- Scrutinee
            -> InId             -- Case binder
            -> [InAlt]          -- Alternatives (inceasing order)
            -> SimplCont
            -> SimplM FloatsWithExpr

rebuildCase env scrut case_bndr alts cont
  | Just (con,args) <- exprIsConApp_maybe scrut 
        -- Works when the scrutinee is a variable with a known unfolding
        -- as well as when it's an explicit constructor application
  = knownCon env scrut (DataAlt con) args case_bndr alts cont

  | Lit lit <- scrut    -- No need for same treatment as constructors
                        -- because literals are inlined more vigorously
  = knownCon env scrut (LitAlt lit) [] case_bndr alts cont

  | otherwise
  =     -- Prepare the continuation;
        -- The new subst_env is in place
    prepareCaseCont env alts cont       `thenSmpl` \ (floats, (dup_cont, nondup_cont)) ->
    addFloats env floats                $ \ env ->      

    let
        -- The case expression is annotated with the result type of the continuation
        -- This may differ from the type originally on the case.  For example
        --      case(T) (case(Int#) a of { True -> 1#; False -> 0# }) of
        --         a# -> <blob>
        -- ===>
        --      let j a# = <blob>
        --      in case(T) a of { True -> j 1#; False -> j 0# }
        -- Note that the case that scrutinises a now returns a T not an Int#
        res_ty' = contResultType dup_cont
    in

        -- Deal with case binder
    simplCaseBinder env scrut case_bndr         `thenSmpl` \ (alt_env, case_bndr') ->

        -- Deal with the case alternatives
    simplAlts alt_env scrut case_bndr' alts dup_cont    `thenSmpl` \ alts' ->

        -- Put the case back together
    mkCase scrut case_bndr' res_ty' alts'       `thenSmpl` \ case_expr ->

        -- Notice that rebuildDone returns the in-scope set from env, not alt_env
        -- The case binder *not* scope over the whole returned case-expression
    rebuild env case_expr nondup_cont
\end{code}

simplCaseBinder checks whether the scrutinee is a variable, v.  If so,
try to eliminate uses of v in the RHSs in favour of case_bndr; that
way, there's a chance that v will now only be used once, and hence
inlined.

Note 1
~~~~~~
There is a time we *don't* want to do that, namely when
-fno-case-of-case is on.  This happens in the first simplifier pass,
and enhances full laziness.  Here's the bad case:
        f = \ y -> ...(case x of I# v -> ...(case x of ...) ... )
If we eliminate the inner case, we trap it inside the I# v -> arm,
which might prevent some full laziness happening.  I've seen this
in action in spectral/cichelli/Prog.hs:
         [(m,n) | m <- [1..max], n <- [1..max]]
Hence the check for NoCaseOfCase.

Note 2
~~~~~~
There is another situation when we don't want to do it.  If we have

    case x of w1 { DEFAULT -> case x of w2 { A -> e1; B -> e2 }
                   ...other cases .... }

We'll perform the binder-swap for the outer case, giving

    case x of w1 { DEFAULT -> case w1 of w2 { A -> e1; B -> e2 } 
                   ...other cases .... }

But there is no point in doing it for the inner case, because w1 can't
be inlined anyway.  Furthermore, doing the case-swapping involves
zapping w2's occurrence info (see paragraphs that follow), and that
forces us to bind w2 when doing case merging.  So we get

    case x of w1 { A -> let w2 = w1 in e1
                   B -> let w2 = w1 in e2
                   ...other cases .... }

This is plain silly in the common case where w2 is dead.

Even so, I can't see a good way to implement this idea.  I tried
not doing the binder-swap if the scrutinee was already evaluated
but that failed big-time:

        data T = MkT !Int

        case v of w  { MkT x ->
        case x of x1 { I# y1 ->
        case x of x2 { I# y2 -> ...

Notice that because MkT is strict, x is marked "evaluated".  But to
eliminate the last case, we must either make sure that x (as well as
x1) has unfolding MkT y1.  THe straightforward thing to do is to do
the binder-swap.  So this whole note is a no-op.

Note 3
~~~~~~
If we replace the scrutinee, v, by tbe case binder, then we have to nuke
any occurrence info (eg IAmDead) in the case binder, because the
case-binder now effectively occurs whenever v does.  AND we have to do
the same for the pattern-bound variables!  Example:

        (case x of { (a,b) -> a }) (case x of { (p,q) -> q })

Here, b and p are dead.  But when we move the argment inside the first
case RHS, and eliminate the second case, we get

        case x of { (a,b) -> a b }

Urk! b is alive!  Reason: the scrutinee was a variable, and case elimination
happened.  

Indeed, this can happen anytime the case binder isn't dead:
        case <any> of x { (a,b) -> 
        case x of { (p,q) -> p } }
Here (a,b) both look dead, but come alive after the inner case is eliminated.
The point is that we bring into the envt a binding
        let x = (a,b) 
after the outer case, and that makes (a,b) alive.  At least we do unless
the case binder is guaranteed dead.

\begin{code}
simplCaseBinder env (Var v) case_bndr
  | not (switchIsOn (getSwitchChecker env) NoCaseOfCase)

-- Failed try [see Note 2 above]
--     not (isEvaldUnfolding (idUnfolding v))

  = simplBinder env (zapOccInfo case_bndr)              `thenSmpl` \ (env, case_bndr') ->
    returnSmpl (modifyInScope env v case_bndr', case_bndr')
        -- We could extend the substitution instead, but it would be
        -- a hack because then the substitution wouldn't be idempotent
        -- any more (v is an OutId).  And this does just as well.
            
simplCaseBinder env other_scrut case_bndr 
  = simplBinder env case_bndr           `thenSmpl` \ (env, case_bndr') ->
    returnSmpl (env, case_bndr')

zapOccInfo :: InId -> InId
zapOccInfo b = b `setIdOccInfo` NoOccInfo
\end{code}


simplAlts does two things:

1.  Eliminate alternatives that cannot match, including the
    DEFAULT alternative.

2.  If the DEFAULT alternative can match only one possible constructor,
    then make that constructor explicit.
    e.g.
        case e of x { DEFAULT -> rhs }
     ===>
        case e of x { (a,b) -> rhs }
    where the type is a single constructor type.  This gives better code
    when rhs also scrutinises x or e.

Here "cannot match" includes knowledge from GADTs

It's a good idea do do this stuff before simplifying the alternatives, to
avoid simplifying alternatives we know can't happen, and to come up with
the list of constructors that are handled, to put into the IdInfo of the
case binder, for use when simplifying the alternatives.

Eliminating the default alternative in (1) isn't so obvious, but it can
happen:

data Colour = Red | Green | Blue

f x = case x of
        Red -> ..
        Green -> ..
        DEFAULT -> h x

h y = case y of
        Blue -> ..
        DEFAULT -> [ case y of ... ]

If we inline h into f, the default case of the inlined h can't happen.
If we don't notice this, we may end up filtering out *all* the cases
of the inner case y, which give us nowhere to go!


\begin{code}
simplAlts :: SimplEnv 
          -> OutExpr
          -> OutId                      -- Case binder
          -> [InAlt] -> SimplCont
          -> SimplM [OutAlt]            -- Includes the continuation

simplAlts env scrut case_bndr' alts cont'
  = do  { mb_alts      <- mapSmpl (simplAlt env imposs_cons case_bndr' cont') alts_wo_default
        ; default_alts <- simplDefault env case_bndr' imposs_deflt_cons cont' maybe_deflt
        ; return (mergeAlts default_alts [alt' | Just (_, alt') <- mb_alts]) }
        -- We need the mergeAlts in case the new default_alt 
        -- has turned into a constructor alternative.
  where
    (alts_wo_default, maybe_deflt) = findDefault alts
    imposs_cons = case scrut of
                    Var v -> otherCons (idUnfolding v)
                    other -> []

        -- "imposs_deflt_cons" are handled either by the context, 
        -- OR by a branch in this case expression. (Don't include DEFAULT!!)
    imposs_deflt_cons = nub (imposs_cons ++ [con | (con,_,_) <- alts_wo_default])

simplDefault :: SimplEnv
             -> OutId           -- Case binder; need just for its type. Note that as an
                                --   OutId, it has maximum information; this is important.
                                --   Test simpl013 is an example
             -> [AltCon]        -- These cons can't happen when matching the default
             -> SimplCont
             -> Maybe InExpr
             -> SimplM [OutAlt] -- One branch or none; we use a list because it's what 
                                --   mergeAlts expects


simplDefault env case_bndr' imposs_cons cont Nothing
  = return []   -- No default branch
simplDefault env case_bndr' imposs_cons cont (Just rhs)
  |     -- This branch handles the case where we are 
        -- scrutinisng an algebraic data type
    Just (tycon, inst_tys) <- splitTyConApp_maybe (idType case_bndr'),
    isAlgTyCon tycon,           -- It's a data type, tuple, or unboxed tuples.  
    not (isNewTyCon tycon),     -- We can have a newtype, if we are just doing an eval:
                                --      case x of { DEFAULT -> e }
                                -- and we don't want to fill in a default for them!
    Just all_cons <- tyConDataCons_maybe tycon,
    not (null all_cons),        -- This is a tricky corner case.  If the data type has no constructors,
                                -- which GHC allows, then the case expression will have at most a default
                                -- alternative.  We don't want to eliminate that alternative, because the
                                -- invariant is that there's always one alternative.  It's more convenient
                                -- to leave     
                                --      case x of { DEFAULT -> e }     
                                -- as it is, rather than transform it to
                                --      error "case cant match"
                                -- which would be quite legitmate.  But it's a really obscure corner, and
                                -- not worth wasting code on.

    let imposs_data_cons = [con | DataAlt con <- imposs_cons]   -- We now know it's a data type 
        poss_data_cons   = filterOut (`elem` imposs_data_cons) all_cons
        gadt_imposs      | all isTyVarTy inst_tys = []
                         | otherwise = filter (cant_match inst_tys) poss_data_cons
        final_poss       = filterOut (`elem` gadt_imposs) poss_data_cons
        
  = case final_poss of
        []    -> returnSmpl []  -- Eliminate the default alternative
                                -- altogether if it can't match

        [con] ->        -- It matches exactly one constructor, so fill it in
                 do { tick (FillInCaseDefault case_bndr')
                    ; con_alt <- mkDataConAlt con inst_tys rhs
                    ; Just (_, alt') <- simplAlt env [] case_bndr' cont con_alt
                        -- The simplAlt must succeed with Just because we have
                        -- already filtered out construtors that can't match
                    ; return [alt'] }

        two_or_more -> simplify_default (map DataAlt gadt_imposs ++ imposs_cons)

  | otherwise
  = simplify_default imposs_cons
  where
    cant_match tys data_con = not (dataConCanMatch data_con tys)

    simplify_default imposs_cons
        = do { let env' = mk_rhs_env env case_bndr' (mkOtherCon imposs_cons)
                -- Record the constructors that the case-binder *can't* be.
             ; rhs' <- simplExprC env' rhs cont
             ; return [(DEFAULT, [], rhs')] }

simplAlt :: SimplEnv
         -> [AltCon]    -- These constructors can't be present when
                        -- matching this alternative
         -> OutId       -- The case binder
         -> SimplCont
         -> InAlt
         -> SimplM (Maybe (TvSubstEnv, OutAlt))

-- Simplify an alternative, returning the type refinement for the 
-- alternative, if the alternative does any refinement at all
-- Nothing => the alternative is inaccessible

simplAlt env imposs_cons case_bndr' cont' (con, bndrs, rhs)
  | con `elem` imposs_cons      -- This case can't match
  = return Nothing

simplAlt env handled_cons case_bndr' cont' (DEFAULT, bndrs, rhs)
        -- TURGID DUPLICATION, needed only for the simplAlt call
        -- in mkDupableAlt.  Clean this up when moving to FC
  = ASSERT( null bndrs )
    simplExprC env' rhs cont'   `thenSmpl` \ rhs' ->
    returnSmpl (Just (emptyVarEnv, (DEFAULT, [], rhs')))
  where
    env' = mk_rhs_env env case_bndr' (mkOtherCon handled_cons)
        -- Record the constructors that the case-binder *can't* be.

simplAlt env handled_cons case_bndr' cont' (LitAlt lit, bndrs, rhs)
  = ASSERT( null bndrs )
    simplExprC env' rhs cont'   `thenSmpl` \ rhs' ->
    returnSmpl (Just (emptyVarEnv, (LitAlt lit, [], rhs')))
  where
    env' = mk_rhs_env env case_bndr' (mkUnfolding False (Lit lit))

simplAlt env handled_cons case_bndr' cont' (DataAlt con, vs, rhs)
  =     -- Deal with the pattern-bound variables
        -- Mark the ones that are in ! positions in the data constructor
        -- as certainly-evaluated.
        -- NB: it happens that simplBinders does *not* erase the OtherCon
        --     form of unfolding, so it's ok to add this info before 
        --     doing simplBinders
    simplBinders env (add_evals con vs)         `thenSmpl` \ (env, vs') ->

                -- Bind the case-binder to (con args)
    let unf       = mkUnfolding False (mkConApp con con_args)
        inst_tys' = tyConAppArgs (idType case_bndr')
        con_args  = map Type inst_tys' ++ varsToCoreExprs vs' 
        env'      = mk_rhs_env env case_bndr' unf
    in
    simplExprC env' rhs cont'   `thenSmpl` \ rhs' ->
    returnSmpl (Just (emptyVarEnv, (DataAlt con, vs', rhs')))
  where
        -- add_evals records the evaluated-ness of the bound variables of
        -- a case pattern.  This is *important*.  Consider
        --      data T = T !Int !Int
        --
        --      case x of { T a b -> T (a+1) b }
        --
        -- We really must record that b is already evaluated so that we don't
        -- go and re-evaluate it when constructing the result.
    add_evals dc vs = cat_evals dc vs (dataConRepStrictness dc)

    cat_evals dc vs strs
        = go vs strs
        where
          go [] [] = []
          go (v:vs) strs | isTyVar v = v : go vs strs
          go (v:vs) (str:strs)
            | isMarkedStrict str = evald_v  : go vs strs
            | otherwise          = zapped_v : go vs strs
            where
              zapped_v = zap_occ_info v
              evald_v  = zapped_v `setIdUnfolding` evaldUnfolding
          go _ _ = pprPanic "cat_evals" (ppr dc $$ ppr vs $$ ppr strs)

        -- If the case binder is alive, then we add the unfolding
        --      case_bndr = C vs
        -- to the envt; so vs are now very much alive
        -- Note [Aug06] I can't see why this actually matters
    zap_occ_info | isDeadBinder case_bndr' = \id -> id
                 | otherwise               = zapOccInfo

mk_rhs_env env case_bndr' case_bndr_unf
  = modifyInScope env case_bndr' (case_bndr' `setIdUnfolding` case_bndr_unf)
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Known constructor}
%*                                                                      *
%************************************************************************

We are a bit careful with occurrence info.  Here's an example

        (\x* -> case x of (a*, b) -> f a) (h v, e)

where the * means "occurs once".  This effectively becomes
        case (h v, e) of (a*, b) -> f a)
and then
        let a* = h v; b = e in f a
and then
        f (h v)

All this should happen in one sweep.

\begin{code}
knownCon :: SimplEnv -> OutExpr -> AltCon -> [OutExpr]
         -> InId -> [InAlt] -> SimplCont
         -> SimplM FloatsWithExpr

knownCon env scrut con args bndr alts cont
  = tick (KnownBranch bndr)             `thenSmpl_`
    case findAlt con alts of
        (DEFAULT, bs, rhs)     -> ASSERT( null bs )
                                  simplNonRecX env bndr scrut   $ \ env ->
                                -- This might give rise to a binding with non-atomic args
                                -- like x = Node (f x) (g x)
                                -- but simplNonRecX will atomic-ify it
                                  simplExprF env rhs cont

        (LitAlt lit, bs, rhs) ->  ASSERT( null bs )
                                  simplNonRecX env bndr scrut   $ \ env ->
                                  simplExprF env rhs cont

        (DataAlt dc, bs, rhs)  
                -> ASSERT( n_drop_tys + length bs == length args )
                   bind_args env dead_bndr bs (drop n_drop_tys args)    $ \ env ->
                   let
                        -- It's useful to bind bndr to scrut, rather than to a fresh
                        -- binding      x = Con arg1 .. argn
                        -- because very often the scrut is a variable, so we avoid
                        -- creating, and then subsequently eliminating, a let-binding
                        -- BUT, if scrut is a not a variable, we must be careful
                        -- about duplicating the arg redexes; in that case, make
                        -- a new con-app from the args
                        bndr_rhs  = case scrut of
                                        Var v -> scrut
                                        other -> con_app
                        con_app = mkConApp dc (take n_drop_tys args ++ con_args)
                        con_args = [substExpr env (varToCoreExpr b) | b <- bs]
                                        -- args are aready OutExprs, but bs are InIds
                   in
                   simplNonRecX env bndr bndr_rhs               $ \ env ->
                   simplExprF env rhs cont
                where
                   n_drop_tys = tyConArity (dataConTyCon dc)

-- Ugh!
bind_args env dead_bndr [] _ thing_inside = thing_inside env

bind_args env dead_bndr (b:bs) (Type ty : args) thing_inside
  = ASSERT( isTyVar b )
    bind_args (extendTvSubst env b ty) dead_bndr bs args thing_inside
    
bind_args env dead_bndr (b:bs) (arg : args) thing_inside
  = ASSERT( isId b )
    let
        b' = if dead_bndr then b else zapOccInfo b
                -- Note that the binder might be "dead", because it doesn't occur 
                -- in the RHS; and simplNonRecX may therefore discard it via postInlineUnconditionally
                -- Nevertheless we must keep it if the case-binder is alive, because it may
                -- be used in teh con_app
    in
    simplNonRecX env b' arg     $ \ env ->
    bind_args env dead_bndr bs args thing_inside
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Duplicating continuations}
%*                                                                      *
%************************************************************************

\begin{code}
prepareCaseCont :: SimplEnv
                -> [InAlt] -> SimplCont
                -> SimplM (FloatsWith (SimplCont,SimplCont))    
                        -- Return a duplicatable continuation, a non-duplicable part 
                        -- plus some extra bindings (that scope over the entire
                        -- continunation)

        -- No need to make it duplicatable if there's only one alternative
prepareCaseCont env [alt] cont = returnSmpl (emptyFloats env, (cont, mkBoringStop (contResultType cont)))
prepareCaseCont env alts  cont = mkDupableCont env cont
\end{code}

\begin{code}
mkDupableCont :: SimplEnv -> SimplCont 
              -> SimplM (FloatsWith (SimplCont, SimplCont))

mkDupableCont env cont
  | contIsDupable cont
  = returnSmpl (emptyFloats env, (cont, mkBoringStop (contResultType cont)))

mkDupableCont env (CoerceIt ty cont)
  = mkDupableCont env cont              `thenSmpl` \ (floats, (dup_cont, nondup_cont)) ->
    returnSmpl (floats, (CoerceIt ty dup_cont, nondup_cont))

mkDupableCont env cont@(ArgOf _ arg_ty _ _)
  =  returnSmpl (emptyFloats env, (mkBoringStop arg_ty, cont))
        -- Do *not* duplicate an ArgOf continuation
        -- Because ArgOf continuations are opaque, we gain nothing by
        -- propagating them into the expressions, and we do lose a lot.
        -- Here's an example:
        --      && (case x of { T -> F; F -> T }) E
        -- Now, && is strict so we end up simplifying the case with
        -- an ArgOf continuation.  If we let-bind it, we get
        --
        --      let $j = \v -> && v E
        --      in simplExpr (case x of { T -> F; F -> T })
        --                   (ArgOf (\r -> $j r)
        -- And after simplifying more we get
        --
        --      let $j = \v -> && v E
        --      in case of { T -> $j F; F -> $j T }
        -- Which is a Very Bad Thing
        --
        -- The desire not to duplicate is the entire reason that
        -- mkDupableCont returns a pair of continuations.
        --
        -- The original plan had:
        -- e.g.         (...strict-fn...) [...hole...]
        --      ==>
        --              let $j = \a -> ...strict-fn...
        --              in $j [...hole...]

mkDupableCont env (ApplyTo _ arg mb_se cont)
  =     -- e.g.         [...hole...] (...arg...)
        --      ==>
        --              let a = ...arg... 
        --              in [...hole...] a
    do  { (floats, (dup_cont, nondup_cont)) <- mkDupableCont env cont
        ; addFloats env floats $ \ env -> do
        { arg1 <- simplArg env arg mb_se
        ; (floats2, arg2) <- mkDupableArg env arg1
        ; return (floats2, (ApplyTo OkToDup arg2 Nothing dup_cont, nondup_cont)) }}

mkDupableCont env cont@(Select _ case_bndr [(_,bs,rhs)] se case_cont)
--   | not (exprIsDupable rhs && contIsDupable case_cont)       -- See notes below
--  | not (isDeadBinder case_bndr)
  | all isDeadBinder bs
  = returnSmpl (emptyFloats env, (mkBoringStop scrut_ty, cont))
  where
    scrut_ty = substTy se (idType case_bndr)

{-      Note [Single-alternative cases]
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This case is just like the ArgOf case.  Here's an example:
        data T a = MkT !a
        ...(MkT (abs x))...
Then we get
        case (case x of I# x' -> 
              case x' <# 0# of
                True  -> I# (negate# x')
                False -> I# x') of y {
          DEFAULT -> MkT y
Because the (case x) has only one alternative, we'll transform to
        case x of I# x' ->
        case (case x' <# 0# of
                True  -> I# (negate# x')
                False -> I# x') of y {
          DEFAULT -> MkT y
But now we do *NOT* want to make a join point etc, giving 
        case x of I# x' ->
        let $j = \y -> MkT y
        in case x' <# 0# of
                True  -> $j (I# (negate# x'))
                False -> $j (I# x')
In this case the $j will inline again, but suppose there was a big
strict computation enclosing the orginal call to MkT.  Then, it won't
"see" the MkT any more, because it's big and won't get duplicated.
And, what is worse, nothing was gained by the case-of-case transform.

When should use this case of mkDupableCont?  
However, matching on *any* single-alternative case is a *disaster*;
  e.g.  case (case ....) of (a,b) -> (# a,b #)
  We must push the outer case into the inner one!
Other choices:

   * Match [(DEFAULT,_,_)], but in the common case of Int, 
     the alternative-filling-in code turned the outer case into
                case (...) of y { I# _ -> MkT y }

   * Match on single alternative plus (not (isDeadBinder case_bndr))
     Rationale: pushing the case inwards won't eliminate the construction.
     But there's a risk of
                case (...) of y { (a,b) -> let z=(a,b) in ... }
     Now y looks dead, but it'll come alive again.  Still, this
     seems like the best option at the moment.

   * Match on single alternative plus (all (isDeadBinder bndrs))
     Rationale: this is essentially  seq.

   * Match when the rhs is *not* duplicable, and hence would lead to a
     join point.  This catches the disaster-case above.  We can test
     the *un-simplified* rhs, which is fine.  It might get bigger or
     smaller after simplification; if it gets smaller, this case might
     fire next time round.  NB also that we must test contIsDupable
     case_cont *btoo, because case_cont might be big!

     HOWEVER: I found that this version doesn't work well, because
     we can get         let x = case (...) of { small } in ...case x...
     When x is inlined into its full context, we find that it was a bad
     idea to have pushed the outer case inside the (...) case.
-}

mkDupableCont env (Select _ case_bndr alts se cont)
  =     -- e.g.         (case [...hole...] of { pi -> ei })
        --      ===>
        --              let ji = \xij -> ei 
        --              in case [...hole...] of { pi -> ji xij }
    do  { tick (CaseOfCase case_bndr)
        ; let alt_env = setInScope se env
        ; (floats1, (dup_cont, nondup_cont)) <- mkDupableCont alt_env cont
                -- NB: call mkDupableCont here, *not* prepareCaseCont
                -- We must make a duplicable continuation, whereas prepareCaseCont
                -- doesn't when there is a single case branch
        ; addFloats alt_env floats1     $ \ alt_env -> do

        { (alt_env, case_bndr') <- simplBinder alt_env case_bndr
                -- NB: simplBinder does not zap deadness occ-info, so
                -- a dead case_bndr' will still advertise its deadness
                -- This is really important because in
                --      case e of b { (# a,b #) -> ... }
                -- b is always dead, and indeed we are not allowed to bind b to (# a,b #),
                -- which might happen if e was an explicit unboxed pair and b wasn't marked dead.
                -- In the new alts we build, we have the new case binder, so it must retain
                -- its deadness.

        ; (floats2, alts') <- mkDupableAlts alt_env case_bndr' alts dup_cont
        ; return (floats2, (Select OkToDup case_bndr' alts' (zapSubstEnv se) 
                                   (mkBoringStop (contResultType dup_cont)),
                            nondup_cont))
        }}

mkDupableArg :: SimplEnv -> OutExpr -> SimplM (FloatsWith OutExpr)
-- Let-bind the thing if necessary
mkDupableArg env arg
  | exprIsDupable arg 
  = return (emptyFloats env, arg)
  | otherwise      
  = do  { arg_id <- newId FSLIT("a") (exprType arg)
        ; tick (CaseOfCase arg_id)
                -- Want to tick here so that we go round again,
                -- and maybe copy or inline the code.
                -- Not strictly CaseOfCase, but never mind
        ; return (unitFloat env arg_id arg, Var arg_id) }
        -- What if the arg should be case-bound? 
        -- This has been this way for a long time, so I'll leave it,
        -- but I can't convince myself that it's right.

mkDupableAlts :: SimplEnv -> OutId -> [InAlt] -> SimplCont
              -> SimplM (FloatsWith [InAlt])
-- Absorbs the continuation into the new alternatives

mkDupableAlts env case_bndr' alts dupable_cont 
  = go env alts
  where
    go env [] = returnSmpl (emptyFloats env, [])
    go env (alt:alts)
        = do { (floats1, mb_alt') <- mkDupableAlt env case_bndr' dupable_cont alt
             ; addFloats env floats1    $ \ env -> do
             { (floats2, alts') <- go env alts
             ; returnSmpl (floats2, case mb_alt' of
                                        Just alt' -> alt' : alts'
                                        Nothing   -> alts'
                          )}}
                                        
mkDupableAlt env case_bndr' cont alt
  = simplAlt env [] case_bndr' cont alt         `thenSmpl` \ mb_stuff ->
    case mb_stuff of {
        Nothing -> returnSmpl (emptyFloats env, Nothing) ;

        Just (reft, (con, bndrs', rhs')) ->
        -- Safe to say that there are no handled-cons for the DEFAULT case

    if exprIsDupable rhs' then
        returnSmpl (emptyFloats env, Just (con, bndrs', rhs'))
        -- It is worth checking for a small RHS because otherwise we
        -- get extra let bindings that may cause an extra iteration of the simplifier to
        -- inline back in place.  Quite often the rhs is just a variable or constructor.
        -- The Ord instance of Maybe in PrelMaybe.lhs, for example, took several extra
        -- iterations because the version with the let bindings looked big, and so wasn't
        -- inlined, but after the join points had been inlined it looked smaller, and so
        -- was inlined.
        --
        -- NB: we have to check the size of rhs', not rhs. 
        -- Duplicating a small InAlt might invalidate occurrence information
        -- However, if it *is* dupable, we return the *un* simplified alternative,
        -- because otherwise we'd need to pair it up with an empty subst-env....
        -- but we only have one env shared between all the alts.
        -- (Remember we must zap the subst-env before re-simplifying something).
        -- Rather than do this we simply agree to re-simplify the original (small) thing later.

    else
    let
        rhs_ty'     = exprType rhs'
        used_bndrs' = filter abstract_over (case_bndr' : bndrs')
        abstract_over bndr
          | isTyVar bndr = not (bndr `elemVarEnv` reft)
                -- Don't abstract over tyvar binders which are refined away
                -- See Note [Refinement] below
          | otherwise    = not (isDeadBinder bndr)
                -- The deadness info on the new Ids is preserved by simplBinders
    in
        -- If we try to lift a primitive-typed something out
        -- for let-binding-purposes, we will *caseify* it (!),
        -- with potentially-disastrous strictness results.  So
        -- instead we turn it into a function: \v -> e
        -- where v::State# RealWorld#.  The value passed to this function
        -- is realworld#, which generates (almost) no code.

        -- There's a slight infelicity here: we pass the overall 
        -- case_bndr to all the join points if it's used in *any* RHS,
        -- because we don't know its usage in each RHS separately

        -- We used to say "&& isUnLiftedType rhs_ty'" here, but now
        -- we make the join point into a function whenever used_bndrs'
        -- is empty.  This makes the join-point more CPR friendly. 
        -- Consider:    let j = if .. then I# 3 else I# 4
        --              in case .. of { A -> j; B -> j; C -> ... }
        --
        -- Now CPR doesn't w/w j because it's a thunk, so
        -- that means that the enclosing function can't w/w either,
        -- which is a lose.  Here's the example that happened in practice:
        --      kgmod :: Int -> Int -> Int
        --      kgmod x y = if x > 0 && y < 0 || x < 0 && y > 0
        --                  then 78
        --                  else 5
        --
        -- I have seen a case alternative like this:
        --      True -> \v -> ...
        -- It's a bit silly to add the realWorld dummy arg in this case, making
        --      $j = \s v -> ...
        --         True -> $j s
        -- (the \v alone is enough to make CPR happy) but I think it's rare

    ( if not (any isId used_bndrs')
        then newId FSLIT("w") realWorldStatePrimTy      `thenSmpl` \ rw_id ->
             returnSmpl ([rw_id], [Var realWorldPrimId])
        else 
             returnSmpl (used_bndrs', varsToCoreExprs used_bndrs')
    )                                                   `thenSmpl` \ (final_bndrs', final_args) ->

        -- See comment about "$j" name above
    newId FSLIT("$j") (mkPiTypes final_bndrs' rhs_ty')  `thenSmpl` \ join_bndr ->
        -- Notice the funky mkPiTypes.  If the contructor has existentials
        -- it's possible that the join point will be abstracted over
        -- type varaibles as well as term variables.
        --  Example:  Suppose we have
        --      data T = forall t.  C [t]
        --  Then faced with
        --      case (case e of ...) of
        --          C t xs::[t] -> rhs
        --  We get the join point
        --      let j :: forall t. [t] -> ...
        --          j = /\t \xs::[t] -> rhs
        --      in
        --      case (case e of ...) of
        --          C t xs::[t] -> j t xs
    let 
        -- We make the lambdas into one-shot-lambdas.  The
        -- join point is sure to be applied at most once, and doing so
        -- prevents the body of the join point being floated out by
        -- the full laziness pass
        really_final_bndrs     = map one_shot final_bndrs'
        one_shot v | isId v    = setOneShotLambda v
                   | otherwise = v
        join_rhs  = mkLams really_final_bndrs rhs'
        join_call = mkApps (Var join_bndr) final_args
    in
    returnSmpl (unitFloat env join_bndr join_rhs, Just (con, bndrs', join_call)) }
\end{code}

Note [Refinement]
~~~~~~~~~~~~~~~~~
Consider
        data T a where
          MkT :: a -> b -> T a

        f = /\a. \(w::a).
           case (case ...) of
                  MkT a' b (p::a') (q::b) -> [p,w]

The danger is that we'll make a join point
        
        j a' p = [p,w]

and that's ill-typed, because (p::a') but (w::a).  

Solution so far: don't abstract over a', because the type refinement
maps [a' -> a] .  Ultimately that won't work when real refinement goes on.

Then we must abstract over any refined free variables.  Hmm.  Maybe we 
could just abstract over *all* free variables, thereby lambda-lifting
the join point?   We should try this.