ghc.mk

   1 # -----------------------------------------------------------------------------
   2 #
   3 # (c) 2009 The University of Glasgow
   4 #
   5 # This file is part of the GHC build system.
   6 #
   7 # To understand how the build system works and how to modify it, see
   8 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
   9 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
  10 #
  11 # -----------------------------------------------------------------------------
  12
  13 # ToDo List.
  14 #
  15 #   * remove old Makefiles, add new stubs for building in subdirs
  16 #     * docs/Makefile
  17 #     * docs/docbook-cheat-sheet/Makefile
  18 #     * docs/ext-core/Makefile
  19 #     * docs/man/Makefile
  20 #     * docs/storage-mgmt/Makefile
  21 #     * docs/vh/Makefile
  22 #     * rts/dotnet/Makefile
  23 #     * utils/Makefile
  24 #   * add Makefiles for the rest of the utils/ programs that aren't built
  25 #     by default (need to exclude them from 'make all' too)
  26
  27 # Possible cleanups:
  28 #
  29 #   * per-source-file dependencies instead of one .depend file?
  30 #   * eliminate undefined variables, and use --warn-undefined-variables?
  31 #   * put outputs from different ways in different subdirs of distdir/build,
  32 #     then we don't have to use -osuf/-hisuf.  We would have to install
  33 #     them in different places too, so we'd need ghc-pkg support for packages
  34 #     of different ways.
  35 #   * make PACKAGES generated by './configure' or './boot'?
  36 #   * we should use a directory of package.conf files rather than a single
  37 #     file for the inplace package database, so that we can express
  38 #     dependencies more accurately.  Otherwise it's possible to get into
  39 #     a state where the package database is out of date, and the build
  40 #     system doesn't know.
  41
  42 # Approximate build order.
  43 #
  44 # The actual build order is defined by dependencies, and the phase
  45 # ordering used to ensure correct ordering of makefile-generation; see
  46 #    http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
  47 #
  48 #     * With bootstrapping compiler:
  49 #           o Build utils/ghc-cabal
  50 #           o Build utils/ghc-pkg
  51 #           o Build utils/hsc2hs
  52 #     * For each package:
  53 #           o configure, generate package-data.mk and inplace-pkg-info
  54 #           o register each package into inplace/lib/package.conf
  55 #     * build libffi
  56 #     * With bootstrapping compiler:
  57 #           o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
  58 #           o Build compiler (stage 1)
  59 #     * With stage 1:
  60 #           o Build libraries/*
  61 #           o Build rts
  62 #           o Build utils/* (except haddock)
  63 #           o Build compiler (stage 2)
  64 #     * With stage 2:
  65 #           o Build utils/haddock
  66 #           o Build compiler (stage 3) (optional)
  67 #     * With haddock:
  68 #           o libraries/*
  69 #           o compiler
  70
  71 .PHONY: default all haddock
  72
  73 # We need second expansion for the way we handle directories, so that
  74 #     | $$$$(dir $$$$@)/.
  75 # expands to the directory of a rule that uses a % pattern.
  76 .SECONDEXPANSION:
  77
  78 default : all
  79
  80 # Catch make if it runs away into an infinite loop
  81 ifeq      "$(MAKE_RESTARTS)" ""
  82 else ifeq "$(MAKE_RESTARTS)" "1"
  83 else ifeq "$(MAKE_RESTARTS)" "2"
  84 else
  85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
  86 endif
  87
  88 # Just bring makefiles up to date:
  89 .PHONY: just-makefiles
  90 just-makefiles:
  91         @:
  92
  93 ifneq "$(CLEANING)" "YES"
  94 CLEANING = NO
  95 endif
  96
  97 # -----------------------------------------------------------------------------
  98 # Misc GNU make utils
  99
 100 nothing=
 101 space=$(nothing) $(nothing)
 102 comma=,
 103
 104 # Cancel all suffix rules.  Ideally we'd like to have 'make -r' turned on
 105 # by default, because that disables all the implicit rules, but there doesn't
 106 # seem to be a good way to do that.  This turns off all the old-style suffix
 107 # rules, which does half the job and speeds up make quite a bit:
 108 .SUFFIXES:
 109
 110 # -----------------------------------------------------------------------------
 111 # Makefile debugging
 112 #
 113 # to see the effective value used for a Makefile variable, do
 114 #  make show VALUE=MY_VALUE
 115 #
 116
 117 show:
 118         @echo '$(VALUE)="$($(VALUE))"'
 119
 120 # -----------------------------------------------------------------------------
 121 # Include subsidiary build-system bits
 122
 123 include mk/tree.mk
 124
 125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 126 include mk/config.mk
 127 ifeq "$(ProjectVersion)" ""
 128 $(error Please run ./configure first)
 129 endif
 130 endif
 131
 132 include mk/ways.mk
 133
 134 # (Optional) build-specific configuration
 135 include mk/custom-settings.mk
 136
 137 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 138 ifeq "$(GhcLibWays)" ""
 139 $(error $$(GhcLibWays) is empty, it must contain at least one way)
 140 endif
 141 endif
 142
 143 # -----------------------------------------------------------------------------
 144 # Utility definitions
 145
 146 include rules/trace.mk
 147 include rules/make-command.mk
 148
 149 # -----------------------------------------------------------------------------
 150 # Macros for standard targets
 151
 152 include rules/all-target.mk
 153 include rules/clean-target.mk
 154
 155 # -----------------------------------------------------------------------------
 156 # The inplace tree
 157
 158 $(eval $(call clean-target,inplace,,inplace))
 159
 160 # -----------------------------------------------------------------------------
 161 # Whether to build dependencies or not
 162
 163 # When we're just doing 'make clean' or 'make show', then we don't need
 164 # to build dependencies.
 165
 166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
 167 NO_INCLUDE_DEPS = YES
 168 NO_INCLUDE_PKGDATA = YES
 169 endif
 170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
 171 NO_INCLUDE_DEPS = YES
 172 NO_INCLUDE_PKGDATA = YES
 173 endif
 174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
 175 NO_INCLUDE_DEPS = YES
 176 # We want package-data.mk for show
 177 endif
 178
 179 # -----------------------------------------------------------------------------
 180 # Ways
 181
 182 include rules/way-prelims.mk
 183
 184 $(foreach way,$(ALL_WAYS),\
 185   $(eval $(call way-prelims,$(way))))
 186
 187 # -----------------------------------------------------------------------------
 188 # Compilation Flags
 189
 190 include rules/distdir-way-opts.mk
 191
 192 # -----------------------------------------------------------------------------
 193 # Finding source files and object files
 194
 195 include rules/hs-sources.mk
 196 include rules/c-sources.mk
 197 include rules/includes-sources.mk
 198 include rules/hs-objs.mk
 199 include rules/c-objs.mk
 200 include rules/cmm-objs.mk
 201
 202 # -----------------------------------------------------------------------------
 203 # Suffix rules
 204
 205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
 206 # so we don't make any when cleaning.
 207 ifneq "$(CLEANING)" "YES"
 208
 209 include rules/hs-suffix-rules-srcdir.mk
 210 include rules/hs-suffix-rules.mk
 211 include rules/hi-rule.mk
 212
 213 $(foreach way,$(ALL_WAYS),\
 214   $(eval $(call hi-rule,$(way))))
 215
 216 include rules/c-suffix-rules.mk
 217 include rules/cmm-suffix-rules.mk
 218
 219 endif # CLEANING=YES
 220
 221 # -----------------------------------------------------------------------------
 222 # Building package-data.mk files from .cabal files
 223
 224 include rules/package-config.mk
 225
 226 # -----------------------------------------------------------------------------
 227 # Building dependencies
 228
 229 include rules/build-dependencies.mk
 230
 231 # -----------------------------------------------------------------------------
 232 # Build package-data.mk files
 233
 234 include rules/build-package-data.mk
 235
 236 # -----------------------------------------------------------------------------
 237 # Build and install a program
 238
 239 include rules/build-prog.mk
 240 include rules/shell-wrapper.mk
 241
 242 # -----------------------------------------------------------------------------
 243 # Build a perl script
 244
 245 include rules/build-perl.mk
 246
 247 # -----------------------------------------------------------------------------
 248 # Build a package
 249
 250 include rules/build-package.mk
 251 include rules/build-package-way.mk
 252 include rules/haddock.mk
 253 include rules/tags-package.mk
 254 include rules/extra-packages.mk
 255
 256 # -----------------------------------------------------------------------------
 257 # Registering hand-written package descriptions (used in libffi and rts)
 258
 259 include rules/manual-package-config.mk
 260
 261 # -----------------------------------------------------------------------------
 262 # Docs
 263
 264 include rules/docbook.mk
 265
 266 # -----------------------------------------------------------------------------
 267 # Making bindists
 268
 269 include rules/bindist.mk
 270
 271 # -----------------------------------------------------------------------------
 272 # Directories
 273
 274 # Don't try to delete directories:
 275 .PRECIOUS: %/.
 276
 277 # Create build directories on demand.  NB. the | below: this indicates
 278 # that $(MKDIRHIER) is an order-only dependency, which means that this
 279 # rule fires after building mkdirhier, but we won't try to recreate
 280 # directories if mkdirhier changes.
 281 %/. : | $(MKDIRHIER)
 282         "$(MKDIRHIER)" $@
 283
 284 # -----------------------------------------------------------------------------
 285 # Packages
 286
 287 # --------------------------------
 288 # Properties of packages
 289 # These lists say "if this package is built, here's a property it has"
 290 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
 291
 292 # Packages that are built but not installed
 293 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
 294
 295 DPH_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
 296                 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq \
 297                 vector primitive
 298
 299 # Packages that, if present, must be built by the stage2 compiler,
 300 # because they use TH and/or annotations, or depend on other stage2
 301 # packages:
 302 STAGE2_PACKAGES := $(DPH_PACKAGES) haskell98 haskell2010
 303 # Packages that we shouldn't build if we don't have TH (e.g. because
 304 # we're building a profiled compiler):
 305 TH_PACKAGES := $(DPH_PACKAGES)
 306
 307 # Packages that are built by stage0, in addition to stage1.  These
 308 # packages are dependencies of GHC, that we do not assume the stage0
 309 # compiler already has installed (or up-to-date enough).
 310 #
 311 # We assume that the stage0 compiler has a suitable bytestring package,
 312 # so we don't have to include it below.
 313 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
 314
 315 # These packages are installed, but are installed hidden
 316 # Why install them at all?  Because the 'ghc' package depends on them
 317 HIDDEN_PACKAGES = binary
 318
 319 # $(EXTRA_PACKAGES)  is another classification, of packages built but
 320 #                    not installed
 321 #                    It is set in rules/extra-package.mk,
 322 #                    by $(call extra-packages) a little further down
 323 #                    this ghc.mk
 324
 325
 326 # --------------------------------
 327 # Packages to build
 328 # The lists of packages that we *actually* going to build in each stage:
 329 #
 330 #  $(STAGE0_PACKAGE)    does double duty; it really is the list of packages
 331 #                       we build the bootstrap compiler in stage 0
 332 #
 333 #  $(PACKAGES)          A list of directories relative to libraries/ containing
 334 #                       packages that will be built by stage1, in dependency
 335 #                       order.
 336 #
 337 #  $(PACKAGES_STAGE2)   Ditto, for stage2.
 338 #
 339
 340 define addPackageGeneral
 341 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
 342     ifeq "$3" ""
 343         $1 += $2
 344     else
 345         ifeq "$$(CLEANING)" "YES"
 346             $1 += $2
 347         else
 348             ifeq $3
 349                 $1 += $2
 350             endif
 351         endif
 352     endif
 353 endef
 354
 355 define addPackage # args: $1 = package, $2 = condition
 356 ifneq "$(filter $1,$(TH_PACKAGES)) $(GhcProfiled)" "$1 YES"
 357 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
 358 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
 359 else
 360 $(call addPackageGeneral,PACKAGES,$1,$2)
 361 endif
 362 endif
 363 endef
 364
 365 $(eval $(call addPackage,ghc-prim))
 366 ifeq "$(CLEANING)" "YES"
 367 $(eval $(call addPackage,integer-gmp))
 368 $(eval $(call addPackage,integer-simple))
 369 else
 370 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
 371 endif
 372 $(eval $(call addPackage,base))
 373 $(eval $(call addPackage,filepath))
 374 $(eval $(call addPackage,array))
 375 $(eval $(call addPackage,bytestring))
 376 $(eval $(call addPackage,containers))
 377
 378 $(eval $(call addPackage,Win32,($$(Windows),YES)))
 379 $(eval $(call addPackage,unix,($$(Windows),NO)))
 380
 381 $(eval $(call addPackage,old-locale))
 382 $(eval $(call addPackage,old-time))
 383 $(eval $(call addPackage,time))
 384 $(eval $(call addPackage,directory))
 385 $(eval $(call addPackage,process))
 386 $(eval $(call addPackage,random))
 387 $(eval $(call addPackage,extensible-exceptions))
 388 $(eval $(call addPackage,haskell98))
 389 $(eval $(call addPackage,haskell2010))
 390 $(eval $(call addPackage,hpc))
 391 $(eval $(call addPackage,pretty))
 392 $(eval $(call addPackage,template-haskell))
 393 $(eval $(call addPackage,Cabal))
 394 $(eval $(call addPackage,binary))
 395 $(eval $(call addPackage,bin-package-db))
 396 $(eval $(call addPackage,mtl))
 397 $(eval $(call addPackage,utf8-string))
 398 $(eval $(call addPackage,xhtml))
 399 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
 400 $(eval $(call addPackage,haskeline))
 401
 402 $(eval $(call extra-packages))
 403
 404 # -------------------------------------------
 405 # Dependencies between package-data.mk files
 406
 407 # We cannot run ghc-cabal to configure a package until we have
 408 # configured and registered all of its dependencies.  So the following
 409 # hack forces all the configure steps to happen in exactly the following order:
 410 #
 411 #  $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
 412 #
 413 # Ideally we should use the correct dependencies here to allow more
 414 # parallelism, but we don't know the dependencies until we've
 415 # generated the pacakge-data.mk files.
 416 define fixed_pkg_dep
 417 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
 418 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
 419 endef
 420
 421 ifneq "$(BINDIST)" "YES"
 422 fixed_pkg_prev=
 423 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 424
 425 # the GHC package doesn't live in libraries/, so we add its dependency manually:
 426 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
 427 fixed_pkg_prev:=compiler/stage2/package-data.mk
 428
 429 # and continue with PACKAGES_STAGE2, which depend on GHC:
 430 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 431
 432 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
 433 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
 434 # haddock depends on ghc and some libraries, but depending on GHC's
 435 # package-data.mk is sufficient, as that in turn depends on all the
 436 # libraries
 437 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
 438
 439 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
 440 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
 441 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
 442 utils/runghc/dist/package-data.mk: compiler/stage2/package-data.mk
 443
 444 # add the final two package.conf dependencies: ghc-prim depends on RTS,
 445 # and RTS depends on libffi.
 446 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
 447 rts/package.conf.inplace : libffi/package.conf.inplace
 448 endif
 449
 450 # --------------------------------
 451 # Misc package-related settings
 452
 453 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
 454
 455 # The actual .a and .so/.dll files: needed for dependencies.
 456 ALL_STAGE1_LIBS  = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
 457 ifeq "$(BuildSharedLibs)" "YES"
 458 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
 459 endif
 460 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
 461
 462 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
 463 ifeq "$(BuildSharedLibs)" "YES"
 464 OTHER_LIBS  += libffi/dist-install/build/libHSffi$(dyn_libsuf)
 465 endif
 466
 467 # ----------------------------------------
 468 # Special magic for the ghc-prim package
 469
 470 # We want the ghc-prim package to include the GHC.Prim module when it
 471 # is registered, but not when it is built, because GHC.Prim is not a
 472 # real source module, it is built-in to GHC.  The old build system did
 473 # this using Setup.hs, but we can't do that here, so we have a flag to
 474 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
 475 # remains compatible with the old build system for the time being).
 476 # GHC.Prim module in the ghc-prim package with a flag:
 477 #
 478 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
 479
 480 # And then we strip it out again before building the package:
 481 define libraries/ghc-prim_PACKAGE_MAGIC
 482 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
 483 endef
 484
 485 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
 486
 487 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
 488         "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
 489
 490 # Required so that Haddock documents the primops.
 491 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
 492
 493 # ----------------------------------------
 494 # Special magic for the integer package
 495
 496 ifneq "$(CLEANING)" "YES"
 497 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 498 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
 499 else
 500     ifeq "$(INTEGER_LIBRARY)" "integer-simple"
 501         libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
 502     else
 503 $(error Unknown integer library: $(INTEGER_LIBRARY))
 504     endif
 505 endif
 506 endif
 507
 508 # ----------------------------------------------
 509 # Checking packages with 'cabal check'
 510
 511 ifeq "$(CHECK_PACKAGES)" "YES"
 512 all: check_packages
 513 endif
 514
 515 # These packages don't pass the Cabal checks because hs-source-dirs
 516 # points outside the source directory. This isn't a real problem in
 517 # these cases, so we just skip checking them.
 518 # NB. these must come before we include the ghc.mk files below, because
 519 # they disable the relevant rules.
 520 CHECKED_libraries/dph/dph-seq = YES
 521 CHECKED_libraries/dph/dph-par = YES
 522 # In compiler's case, include-dirs points outside of the source tree
 523 CHECKED_compiler = YES
 524
 525 # -----------------------------------------------------------------------------
 526 # Include build instructions from all subdirs
 527
 528 # For the rationale behind the build phases, see
 529 #   http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
 530
 531 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
 532 # "dist", just read the package-data.mk file, do not build anything".
 533
 534 # We carefully engineer things so that we can build the
 535 # package-data.mk files early on: they depend only on a few tools also
 536 # built early.  Having got the package-data.mk files built, we can
 537 # restart make with up-to-date information about all the packages
 538 # (this is phase 0).  The remaining problem is the .depend files:
 539 #
 540 #   - .depend files in libraries need the stage 1 compiler to build
 541 #   - ghc/stage1/.depend needs compiler/stage1 built
 542 #   - compiler/stage1/.depend needs the bootstrap libs built
 543 #
 544 # GHC 6.11+ can build a .depend file without having built the
 545 # dependencies of the package, but we can't rely on the bootstrapping
 546 # compiler being able to do this, which is why we have to separate the
 547 # three phases above.
 548
 549 # So this is the final ordering:
 550
 551 # Phase 0 : all package-data.mk files
 552 #           (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
 553 # Phase 1 : .depend files for bootstrap libs
 554 #           (requires hsc2hs)
 555 # Phase 2 : compiler/stage1/.depend
 556 #           (requires bootstrap libs and genprimopcode)
 557 # Phase 3 : ghc/stage1/.depend
 558 #           (requires compiler/stage1)
 559 #
 560 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
 561
 562 ifneq "$(BINDIST)" "YES"
 563 BUILD_DIRS += \
 564    $(GHC_MKDIRHIER_DIR)
 565 endif
 566
 567 BUILD_DIRS += \
 568    docs/users_guide \
 569    docs/ext-core \
 570    docs/man \
 571    $(GHC_UNLIT_DIR) \
 572    $(GHC_HP2PS_DIR)
 573
 574 ifneq "$(GhcUnregisterised)" "YES"
 575 BUILD_DIRS += \
 576    $(GHC_MANGLER_DIR) \
 577    $(GHC_SPLIT_DIR)
 578 endif
 579
 580 ifneq "$(BINDIST)" "YES"
 581 BUILD_DIRS += \
 582    $(GHC_GENPRIMOP_DIR)
 583 endif
 584
 585 BUILD_DIRS += \
 586    driver \
 587    driver/ghci \
 588    driver/ghc \
 589    driver/haddock \
 590    libffi \
 591    includes \
 592    rts
 593
 594 ifneq "$(BINDIST)" "YES"
 595 BUILD_DIRS += \
 596    bindisttest \
 597    $(GHC_CABAL_DIR) \
 598    $(GHC_GENAPPLY_DIR)
 599 endif
 600
 601 BUILD_DIRS += \
 602    utils/haddock \
 603    utils/haddock/doc
 604
 605 ifneq "$(CLEANING)" "YES"
 606 BUILD_DIRS += \
 607    $(patsubst %, libraries/%, $(PACKAGES))
 608 endif
 609
 610 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 611 BUILD_DIRS += libraries/integer-gmp/gmp
 612 endif
 613
 614 BUILD_DIRS += \
 615    compiler \
 616    $(GHC_HSC2HS_DIR) \
 617    $(GHC_PKG_DIR) \
 618    utils/testremove \
 619    utils/ghctags \
 620    utils/hpc \
 621    utils/runghc \
 622    ghc
 623 ifeq "$(Windows)" "YES"
 624 BUILD_DIRS += \
 625    $(GHC_TOUCHY_DIR)
 626 endif
 627
 628 ifneq "$(BINDIST)" "YES"
 629 BUILD_DIRS += \
 630    utils/mkUserGuidePart
 631 endif
 632
 633 BUILD_DIRS += utils/count_lines
 634 BUILD_DIRS += utils/compare_sizes
 635
 636 ifneq "$(CLEANING)" "YES"
 637 # After compiler/, because these packages depend on it
 638 BUILD_DIRS += \
 639    $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
 640 endif
 641
 642 # XXX libraries/% must come before any programs built with stage1, see
 643 # Note [lib-depends].
 644
 645 ifeq "$(phase)" "0"
 646 $(foreach lib,$(STAGE0_PACKAGES),$(eval \
 647   libraries/$(lib)_dist-boot_DISABLE = YES))
 648 endif
 649
 650 ifneq "$(findstring $(phase),0 1)" ""
 651 # We can build deps for compiler/stage1 in phase 2
 652 compiler_stage1_DISABLE = YES
 653 endif
 654
 655 ifneq "$(findstring $(phase),0 1 2)" ""
 656 ghc_stage1_DISABLE = YES
 657 endif
 658
 659 ifneq "$(findstring $(phase),0 1 2 3)" ""
 660 # In phases 0-3, we disable stage2-3, the full libraries and haddock
 661 utils/haddock_dist_DISABLE = YES
 662 utils/runghc_dist_DISABLE = YES
 663 utils/ghctags_dist_DISABLE = YES
 664 utils/hpc_dist_DISABLE = YES
 665 utils/hsc2hs_dist-install_DISABLE = YES
 666 utils/ghc-pkg_dist-install_DISABLE = YES
 667 utils/mkUserGuidePart_dist_DISABLE = YES
 668 utils/compare_sizes_dist_DISABLE = YES
 669 compiler_stage2_DISABLE = YES
 670 compiler_stage3_DISABLE = YES
 671 ghc_stage2_DISABLE = YES
 672 ghc_stage3_DISABLE = YES
 673 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
 674   libraries/$(lib)_dist-install_DISABLE = YES))
 675 endif
 676
 677 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
 678
 679 # A useful pseudo-target (must be after the include above, because it needs
 680 # the value of things like $(libraries/base_dist-install_v_LIB).
 681 .PHONY: stage1_libs
 682 stage1_libs : $(ALL_STAGE1_LIBS)
 683
 684 # ----------------------------------------------
 685 # Per-package compiler flags
 686 #
 687 # If you want to add per-package compiler flags, this
 688 # is the place to do it.  Do it like this for package <pkg>
 689 #
 690 #   libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
 691 #   libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
 692
 693 # Add $(GhcLibHcOpts) to all package builds
 694 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
 695
 696 # Add $(GhcBootLibHcOpts) to all stage0 package builds
 697 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
 698
 699 # -----------------------------------------------
 700 # Haddock-related bits
 701
 702 # Don't run Haddock for the package that will not be installed
 703 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
 704 # We don't haddock the bootstrapping libraries
 705 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
 706
 707 # Build the Haddock contents and index
 708 ifeq "$(HADDOCK_DOCS)" "YES"
 709 libraries/index.html: $(ALL_HADDOCK_FILES)
 710         cd libraries && sh gen_contents_index --inplace
 711 $(eval $(call all-target,library_doc_index,libraries/index.html))
 712 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
 713 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
 714                libraries/haddock*.js libraries/index*.html libraries/*.gif
 715 endif
 716
 717 # -----------------------------------------------------------------------------
 718 # Bootstrapping libraries
 719
 720 # We need to build a few libraries with the installed GHC, since GHC itself
 721 # and some of the tools depend on them:
 722
 723 ifneq "$(BINDIST)" "YES"
 724
 725 ifneq "$(BOOTSTRAPPING_CONF)" ""
 726 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
 727 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
 728 endif
 729 endif
 730
 731 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
 732
 733 # These three libraries do not depend on each other, so we can build
 734 # them straight off:
 735
 736 $(eval $(call build-package,libraries/hpc,dist-boot,0))
 737 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
 738 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
 739 $(eval $(call build-package,libraries/binary,dist-boot,0))
 740 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
 741
 742 # register the boot packages in strict sequence, because running
 743 # multiple ghc-pkgs in parallel doesn't work (registrations may get
 744 # lost).
 745 fixed_pkg_prev=
 746 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
 747
 748 compiler/stage1/package-data.mk : \
 749     libraries/Cabal/dist-boot/package-data.mk \
 750     libraries/hpc/dist-boot/package-data.mk \
 751     libraries/extensible-exceptions/dist-boot/package-data.mk \
 752     libraries/bin-package-db/dist-boot/package-data.mk
 753
 754 # These are necessary because the bootstrapping compiler may not know
 755 # about cross-package dependencies:
 756 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
 757 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
 758
 759 # A few careful dependencies between bootstrapping packages.  When we
 760 # can rely on the stage 0 compiler being able to generate
 761 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
 762 # these, and also some of the phases.
 763 #
 764 # If you miss any out here, then 'make -j8' will probably tell you.
 765 #
 766 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
 767
 768 # Make sure we have all the GHCi libs by the time we've built
 769 # ghc-stage2.  DPH includes a bit of Template Haskell which needs the
 770 # GHCI libs, and we don't have a better way to express that dependency.
 771 #
 772 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
 773             $(compiler_stage2_GHCI_LIB)
 774
 775 ifeq "$(UseArchivesForGhci)" "NO"
 776 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
 777 endif
 778
 779 ifeq "$(UseArchivesForGhci)" "YES"
 780 GHCI_lib_way = v
 781 else
 782 GHCI_lib_way = GHCI
 783 endif
 784
 785 # Deps for TH uses in libraries
 786 $(foreach way, $(GhcLibWays),$(eval \
 787 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
 788     $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
 789   ))
 790 endif
 791
 792 # -----------------------------------------------------------------------------
 793 # Creating a local mingw copy on Windows
 794
 795 ifeq "$(Windows)" "YES"
 796
 797 install : install_mingw
 798 .PHONY: install_mingw
 799 install_mingw : $(INPLACE_MINGW)
 800         "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
 801
 802 install : install_perl
 803 .PHONY: install_perl
 804 install_perl : $(INPLACE_PERL)
 805         "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
 806
 807 endif # Windows
 808
 809 ifneq "$(BINDIST)" "YES"
 810 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
 811     libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
 812 endif # BINDIST
 813
 814 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
 815                             $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
 816                           | $$(dir $$@)/.
 817         "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
 818
 819 .PHONY: tags
 820 tags: tags_compiler
 821
 822 .PHONY: TAGS
 823 TAGS: TAGS_compiler
 824
 825 # -----------------------------------------------------------------------------
 826 # Installation
 827
 828 install: install_packages install_libs install_libexecs install_headers \
 829          install_libexec_scripts install_bins install_topdirs
 830 ifeq "$(HADDOCK_DOCS)" "YES"
 831 install: install_docs
 832 endif
 833
 834 install_bins: $(INSTALL_BINS)
 835         $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
 836         for i in $(INSTALL_BINS); do \
 837                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ;  \
 838         done
 839
 840 install_libs: $(INSTALL_LIBS)
 841         $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
 842         for i in $(INSTALL_LIBS); do \
 843                 case $$i in \
 844                   *.a) \
 845                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
 846                     $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
 847                   *.dll) \
 848                     $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
 849                   *.so) \
 850                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
 851                   *.dylib) \
 852                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
 853                   *) \
 854                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
 855                 esac; \
 856         done
 857
 858 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
 859 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
 860         @:
 861 else
 862         $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
 863         for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
 864                 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
 865         done
 866 endif
 867
 868 install_libexecs:  $(INSTALL_LIBEXECS)
 869 ifeq "$(INSTALL_LIBEXECS)" ""
 870         @:
 871 else
 872         $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
 873         for i in $(INSTALL_LIBEXECS); do \
 874                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
 875         done
 876 # We rename ghc-stage2, so that the right program name is used in error
 877 # messages etc.
 878         "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
 879 endif
 880
 881 install_topdirs: $(INSTALL_TOPDIRS)
 882         $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
 883         for i in $(INSTALL_TOPDIRS); do \
 884                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
 885         done
 886
 887 install_headers: $(INSTALL_HEADERS)
 888         $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
 889         for i in $(INSTALL_HEADERS); do \
 890                 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
 891         done
 892
 893 install_docs: $(INSTALL_DOCS)
 894         $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
 895 ifneq "$(INSTALL_DOCS)" ""
 896         for i in $(INSTALL_DOCS); do \
 897                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
 898         done
 899 endif
 900         $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
 901         $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
 902 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
 903         $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
 904         for i in $(INSTALL_LIBRARY_DOCS); do \
 905                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
 906         done
 907         $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
 908         $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
 909 endif
 910 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
 911         for i in $(INSTALL_HTML_DOC_DIRS); do \
 912                 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
 913                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
 914         done
 915 endif
 916
 917 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
 918
 919 # Install packages in the right order, so that ghc-pkg doesn't complain.
 920 # Also, install ghc-pkg first.
 921 ifeq "$(Windows)" "NO"
 922 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
 923 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
 924 else
 925 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
 926 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
 927 endif
 928
 929 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES)) \
 930                       compiler \
 931                       $(addprefix libraries/,$(PACKAGES_STAGE2))
 932 ifeq "$(InstallExtraPackages)" "NO"
 933 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
 934                                    $(INSTALLED_PKG_DIRS))
 935 endif
 936 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(INTREE_ONLY_PACKAGES)),\
 937                                    $(INSTALLED_PKG_DIRS))
 938
 939 # Set the INSTALL_DISTDIR_p for each package; compiler is special
 940 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
 941    $(eval INSTALL_DISTDIR_$p = dist-install))
 942 INSTALL_DISTDIR_compiler = stage2
 943
 944 # Now we can do the installation
 945 install_packages: install_libexecs
 946 install_packages: libffi/package.conf.install rts/package.conf.install
 947         $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
 948         "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
 949         $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
 950         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
 951         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
 952         $(foreach p, $(INSTALLED_PKG_DIRS),                           \
 953             $(call make-command,                                      \
 954                    "$(GHC_CABAL_INPLACE)" install                     \
 955                                           "$(INSTALLED_GHC_REAL)"     \
 956                                           "$(INSTALLED_GHC_PKG_REAL)" \
 957                                           "$(STRIP_CMD)"              \
 958                                           "$(DESTDIR)$(topdir)"       \
 959                                           $p $(INSTALL_DISTDIR_$p)    \
 960                                           '$(DESTDIR)'                \
 961                                           '$(prefix)'                 \
 962                                           '$(ghclibdir)'              \
 963                                           '$(docdir)/html/libraries'  \
 964                                           $(RelocatableBuild)))
 965         $(foreach p, $(HIDDEN_PACKAGES),                                   \
 966             $(call make-command,                                           \
 967                    "$(INSTALLED_GHC_PKG_REAL)"                             \
 968                        --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
 969
 970 # -----------------------------------------------------------------------------
 971 # Binary distributions
 972
 973 ifneq "$(CLEANING)" "YES"
 974 # This rule seems to hold some files open on Windows which prevents
 975 # cleaning, perhaps due to the $(wildcard).
 976
 977 $(eval $(call bindist,.,\
 978     LICENSE \
 979     README \
 980     INSTALL \
 981     configure config.sub config.guess install-sh \
 982     extra-gcc-opts.in \
 983     packages \
 984     Makefile \
 985     mk/config.mk.in \
 986     $(INPLACE_BIN)/mkdirhier \
 987     $(INPLACE_BIN)/ghc-cabal \
 988     utils/ghc-pwd/ghc-pwd \
 989     $(BINDIST_WRAPPERS) \
 990     $(BINDIST_PERL_SOURCES) \
 991     $(BINDIST_LIBS) \
 992     $(BINDIST_HI) \
 993     $(BINDIST_EXTRAS) \
 994     $(includes_H_CONFIG) \
 995     $(includes_H_PLATFORM) \
 996     $(includes_H_FILES) \
 997     includes/ghcconfig.h \
 998     includes/rts/Config.h \
 999     $(INSTALL_HEADERS) \
1000     $(INSTALL_LIBEXECS) \
1001     $(INSTALL_LIBEXEC_SCRIPTS) \
1002     $(INSTALL_TOPDIRS) \
1003     $(INSTALL_BINS) \
1004     $(INSTALL_MANPAGES) \
1005     $(INSTALL_DOCS) \
1006     $(INSTALL_LIBRARY_DOCS) \
1007     $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
1008     docs/index.html \
1009     compiler/stage2/doc \
1010     $(wildcard libraries/*/dist-install/doc/) \
1011     $(wildcard libraries/*/*/dist-install/doc/) \
1012     $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
1013     $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
1014     mk/project.mk \
1015     mk/install.mk.in \
1016     bindist.mk \
1017     libraries/gen_contents_index \
1018     libraries/prologue.txt \
1019     $(wildcard libraries/dph/LICENSE \
1020                libraries/dph/ghc-packages \
1021                libraries/dph/ghc-packages2 \
1022                libraries/dph/ghc-stage2-package) \
1023  ))
1024 endif
1025 # mk/project.mk gets an absolute path, so we manually include it in
1026 # the bindist with a relative path
1027
1028 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1029
1030 unix-binary-dist-prep:
1031         "$(RM)" $(RM_OPTS_REC) bindistprep/
1032         "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1033         set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1034         echo "HADDOCK_DOCS       = $(HADDOCK_DOCS)"       >> $(BIN_DIST_MK)
1035         echo "LATEX_DOCS         = $(LATEX_DOCS)"         >> $(BIN_DIST_MK)
1036         echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1037         echo "BUILD_DOCBOOK_PS   = $(BUILD_DOCBOOK_PS)"   >> $(BIN_DIST_MK)
1038         echo "BUILD_DOCBOOK_PDF  = $(BUILD_DOCBOOK_PDF)"  >> $(BIN_DIST_MK)
1039         echo "BUILD_MAN          = $(BUILD_MAN)"          >> $(BIN_DIST_MK)
1040         cd $(BIN_DIST_PREP_DIR) && autoreconf
1041         "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
1042 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1043 # tree then we want to include the real file, not a symlink to it
1044         cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1045
1046 windows-binary-dist-prep:
1047         "$(RM)" $(RM_OPTS_REC) bindistprep/
1048         $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1049         cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1050
1051 windows-installer:
1052 ifeq "$(ISCC_CMD)" ""
1053         @echo No ISCC_CMD, so not making installer
1054 else
1055         "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1056 endif
1057
1058 # tryTimes tries to run its third argument multiple times, until it
1059 # succeeds. Don't call it directly; call try10Times instead.
1060 # The first and second argument to tryTimes are lists of values.
1061 # The length of the first argument is the number of times we have
1062 # already tried. The length of the second argument is the number more
1063 # times we will try.
1064 tryTimes = $(if $2, \
1065                 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1066                 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1067                 )
1068
1069 # Try to run the argument 10 times. If all 10 fail, fail.
1070 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1071
1072 .PHONY: publish-binary-dist
1073 publish-binary-dist:
1074         $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1075 ifeq "$(mingw32_TARGET_OS)" "1"
1076         $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1077 endif
1078
1079 .PHONY: publish-docs
1080 publish-docs:
1081         $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1082
1083 # -----------------------------------------------------------------------------
1084 # Source distributions
1085
1086 # Do it like this:
1087 #
1088 #       $ make
1089 #       $ make sdist
1090 #
1091
1092 # A source dist is built from a complete build tree, because we
1093 # require some extra files not contained in a darcs checkout: the
1094 # output from Happy and Alex, for example.
1095 #
1096 # The steps performed by 'make dist' are as follows:
1097 #   - create a complete link-tree of the current build tree in /tmp
1098 #   - run 'make distclean' on that tree
1099 #   - remove a bunch of other files that we know shouldn't be in the dist
1100 #   - tar up first the extralibs package, then the main source package
1101
1102 #
1103 # Directory in which we're going to build the src dist
1104 #
1105 SRC_DIST_NAME=ghc-$(ProjectVersion)
1106 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1107
1108 #
1109 # Files to include in source distributions
1110 #
1111 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1112 SRC_DIST_FILES += \
1113         configure.ac config.guess config.sub configure \
1114         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1115         ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1116         boot boot-pkgs packages ghc.mk
1117
1118 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1119
1120 VERSION :
1121         echo $(ProjectVersion) >VERSION
1122
1123 sdist : VERSION
1124
1125 # Use:
1126 #     $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1127 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1128 # "stage2" is the dist dir.
1129 define sdist_file
1130         "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1131         mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1132 endef
1133
1134 .PHONY: sdist-prep
1135 sdist-prep :
1136         "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1137         "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1138         mkdir $(SRC_DIST_DIR)
1139         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1140         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1141         cd $(SRC_DIST_DIR) && $(MAKE) distclean
1142         rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1143         rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1144         $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1145         $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1146         $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1147         $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1148         $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1149         $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1150         $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1151         $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1152         $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1153         $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1154         cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1155         cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1156
1157 .PHONY: sdist
1158 sdist : sdist-prep
1159         "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1160
1161 sdist-manifest : $(SRC_DIST_TARBALL)
1162         tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1163
1164 # Upload the distribution(s)
1165 # Retrying is to work around buggy firewalls that corrupt large file transfers
1166 # over SSH.
1167 ifneq "$(PublishLocation)" ""
1168 publish-sdist :
1169         $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1170 endif
1171
1172 ifeq "$(BootingFromHc)" "YES"
1173 # In a normal build we use GHC to compile C files (see
1174 # rules/c-suffix-rules.mk), which passes a number of its own options
1175 # to the C compiler.  So when bootstrapping we have to provide these
1176 # flags explicitly to C compilations.
1177 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1178 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1179 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1180 endif
1181
1182 # -----------------------------------------------------------------------------
1183 # sdisting libraries
1184
1185 # Use manually, with e.g.:
1186 #     make sdist_directory
1187
1188 sdist_%:
1189         inplace/bin/ghc-cabal sdist libraries/$* dist-install
1190
1191 # -----------------------------------------------------------------------------
1192 # Cleaning
1193
1194 .PHONY: clean
1195
1196 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1197 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1198 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1199 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1200 CLEAN_FILES += libraries/bootstrapping.conf
1201 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1202 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1203
1204 clean : clean_files clean_libraries
1205
1206 .PHONY: clean_files
1207 clean_files :
1208         "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1209
1210 ifneq "$(NO_CLEAN_GMP)" "YES"
1211 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1212 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1213
1214 clean : clean_gmp
1215 .PHONY: clean_gmp
1216 clean_gmp:
1217         "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1218         "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1219 endif
1220
1221 .PHONY: clean_libraries
1222 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1223 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1224
1225 clean_libraries:
1226         "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1227         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1228
1229 # We have to define a clean target for each library manually, because the
1230 # libraries/*/ghc.mk files are not included when we're cleaning.
1231 ifeq "$(CLEANING)" "YES"
1232 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1233   $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1234 endif
1235
1236 clean : clean_bindistprep
1237 .PHONY: clean_bindistprep
1238 clean_bindistprep:
1239         "$(RM)" $(RM_OPTS_REC) bindistprep/
1240
1241 distclean : clean
1242         "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1243         "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1244         "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1245         "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1246         "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1247         "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1248         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1249         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1250         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1251         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1252         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1253
1254         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1255         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1256         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1257         "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1258
1259 maintainer-clean : distclean
1260         "$(RM)" $(RM_OPTS) configure mk/config.h.in
1261         "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1262         "$(RM)" $(RM_OPTS) ghc.spec
1263         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1264                 $(PACKAGES) $(PACKAGES_STAGE2))
1265         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1266         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1267                 $(PACKAGES) $(PACKAGES_STAGE2))
1268         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1269         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1270         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1271         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1272         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1273
1274 .PHONY: all_libraries
1275
1276 .PHONY: bootstrapping-files
1277 bootstrapping-files: $(OTHER_LIBS)
1278 bootstrapping-files: includes/ghcautoconf.h
1279 bootstrapping-files: includes/DerivedConstants.h
1280 bootstrapping-files: includes/GHCConstants.h
1281
1282 .DELETE_ON_ERROR:
1283