1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * other documentation
17 # * create doc index and contents
18 # * Windows: should we have ghc-pkg-<version>?
19 # * should we be stripping things?
20 # * install libgmp.a, gmp.h
21 # * need to fix Cabal for new Windows layout, see
22 # Distribution/Simple/GHC.configureToolchain.
23 # * remove old Makefiles, add new stubs for building in subdirs
24 # * utils/hsc2hs/Makefile
25 # * utils/haddock/Makefile
27 # * docs/docbook-cheat-sheet/Makefile
28 # * docs/ext-core/Makefile
30 # * docs/storage-mgmt/Makefile
33 # * rts/dotnet/Makefile
36 # * optionally install stage3?
37 # * shared libraries, way dyn
38 # * add Makefiles for the rest of the utils/ programs that aren't built
39 # by default (need to exclude them from 'make all' too)
41 # Tickets we can now close, or fix and close:
43 # * 1693 make distclean
44 # * 3173 make install with DESTDIR
48 # * per-source-file dependencies instead of one .depend file?
49 # * eliminate undefined variables, and use --warn-undefined-variables?
50 # * perhaps we should make all the output dirs in the .depend rule, to
51 # avoid all these mkdirhier calls?
52 # * put outputs from different ways in different subdirs of distdir/build,
53 # then we don't have to use -osuf/-hisuf. We would have to install
54 # them in different places too, so we'd need ghc-pkg support for packages
56 # * make PACKAGES generated by configure or sh boot?
57 # * we should use a directory of package.conf files rather than a single
58 # file for the inplace package database, so that we can express
59 # dependencies more accurately. Otherwise it's possible to get into
60 # a state where the package database is out of date, and the build
61 # system doesn't know.
63 # Approximate build order.
65 # The actual build order is defined by dependencies, and the phase
66 # ordering used to ensure correct ordering of makefile-generation; see
67 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
69 # * With bootstrapping compiler:
70 # o Build utils/ghc-cabal
71 # o Build utils/ghc-pkg
72 # o Build utils/hsc2hs
74 # o configure, generate package-data.mk and inplace-pkg-info
75 # o register each package into inplace/lib/package.conf
77 # * With bootstrapping compiler:
78 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
79 # o Build compiler (stage 1)
83 # o Build utils/* (except haddock)
84 # o Build compiler (stage 2)
86 # o Build utils/haddock
87 # o Build compiler (stage 3) (optional)
92 .PHONY: default all haddock
96 # Just bring makefiles up to date:
97 .PHONY: just-makefiles
101 # -----------------------------------------------------------------------------
102 # Misc GNU make utils
105 space=$(nothing) $(nothing)
108 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
109 # by default, because that disables all the implicit rules, but there doesn't
110 # seem to be a good way to do that. This turns off all the old-style suffix
111 # rules, which does half the job and speeds up make quite a bit:
114 # -----------------------------------------------------------------------------
116 # to see the effective value used for a Makefile variable, do
117 # make show VALUE=MY_VALUE
121 @echo '$(VALUE)="$($(VALUE))"'
123 # -----------------------------------------------------------------------------
124 # Include subsidiary build-system bits
128 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
130 ifeq "$(ProjectVersion)" ""
131 $(error Please run ./configure first)
135 # (Optional) build-specific configuration
136 include mk/custom-settings.mk
138 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
139 ifeq "$(GhcLibWays)" ""
140 $(error $$(GhcLibWays) is empty, it must contain at least one way)
144 # -----------------------------------------------------------------------------
145 # Macros for standard targets
147 include rules/all-target.mk
148 include rules/clean-target.mk
150 # -----------------------------------------------------------------------------
153 $(eval $(call clean-target,inplace,,inplace))
155 # -----------------------------------------------------------------------------
156 # Whether to build dependencies or not
158 # When we're just doing 'make clean' or 'make show', then we don't need
159 # to build dependencies.
161 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
162 NO_INCLUDE_DEPS = YES
163 NO_INCLUDE_PKGDATA = YES
165 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
166 NO_INCLUDE_DEPS = YES
167 NO_INCLUDE_PKGDATA = YES
169 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
170 NO_INCLUDE_DEPS = YES
171 # We want package-data.mk for show
174 # We don't haddock base3-compat, as it has the same package name as base
175 libraries/base3-compat_dist-install_DO_HADDOCK = NO
177 # We don't haddock the bootstrapping libraries
178 libraries/hpc_dist-boot_DO_HADDOCK = NO
179 libraries/Cabal_dist-boot_DO_HADDOCK = NO
180 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
181 libraries/filepath_dist-boot_DO_HADDOCK = NO
183 # -----------------------------------------------------------------------------
186 include rules/way-prelims.mk
188 $(foreach way,$(ALL_WAYS),\
189 $(eval $(call way-prelims,$(way))))
191 # -----------------------------------------------------------------------------
194 include rules/distdir-opts.mk
195 include rules/distdir-way-opts.mk
197 # -----------------------------------------------------------------------------
198 # Finding source files and object files
200 include rules/hs-sources.mk
201 include rules/c-sources.mk
202 include rules/includes-sources.mk
203 include rules/hs-objs.mk
204 include rules/c-objs.mk
205 include rules/cmm-objs.mk
207 # -----------------------------------------------------------------------------
210 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
211 # so we don't make any when cleaning.
212 ifneq "$(CLEANING)" "YES"
214 include rules/hs-suffix-rules-srcdir.mk
215 include rules/hs-suffix-rules.mk
217 # -----------------------------------------------------------------------------
218 # Suffix rules for .hi files
220 include rules/hi-rule.mk
222 $(foreach way,$(ALL_WAYS),\
223 $(eval $(call hi-rule,$(way))))
225 #-----------------------------------------------------------------------------
226 # C-related suffix rules
228 include rules/c-suffix-rules.mk
230 #-----------------------------------------------------------------------------
231 # CMM-related suffix rules
233 include rules/cmm-suffix-rules.mk
237 # -----------------------------------------------------------------------------
238 # Building package-data.mk files from .cabal files
240 include rules/package-config.mk
242 # -----------------------------------------------------------------------------
243 # Building dependencies
245 include rules/build-dependencies.mk
247 # -----------------------------------------------------------------------------
248 # Build package-data.mk files
250 include rules/build-package-data.mk
252 # -----------------------------------------------------------------------------
253 # Build and install a program
255 include rules/build-prog.mk
256 include rules/shell-wrapper.mk
258 # -----------------------------------------------------------------------------
259 # Build a perl script
261 include rules/build-perl.mk
263 # -----------------------------------------------------------------------------
266 include rules/build-package.mk
267 include rules/build-package-way.mk
268 include rules/haddock.mk
270 # -----------------------------------------------------------------------------
271 # Registering hand-written package descriptions (used in libffi and rts)
273 include rules/manual-package-config.mk
275 # -----------------------------------------------------------------------------
278 include rules/docbook.mk
280 # -----------------------------------------------------------------------------
283 include rules/bindist.mk
285 # -----------------------------------------------------------------------------
288 # XXX generate from $(TOP)/packages
298 ifeq "$(Windows)" "YES"
310 extensible-exceptions \
321 ifneq "$(Windows)" "YES"
325 PACKAGES += haskeline
327 ifneq "$(BootingFromHc)" "YES"
330 dph/dph-prim-interface \
337 BOOT_PKGS = Cabal hpc extensible-exceptions
339 # The actual .a and .so/.dll files: needed for dependencies.
340 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
341 ifeq "$(BuildSharedLibs)" "YES"
342 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
344 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
346 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
347 ifeq "$(BuildSharedLibs)" "YES"
348 OTHER_LIBS += libffi/libHSffi$(dyn_libsuf)
350 ifeq "$(HaveLibGmp)" "NO"
351 GMP_LIB = gmp/libgmp.a
352 OTHER_LIBS += $(GMP_LIB)
355 # We cannot run ghc-cabal to configure a package until we have
356 # configured and registered all of its dependencies. So the following
357 # hack forces all the configure steps to happen in exactly the order
358 # given in the PACKAGES variable above. Ideally we should use the
359 # correct dependencies here to allow more parallelism, but we don't
360 # know the dependencies until we've generated the pacakge-data.mk
363 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
367 ifneq "$(BINDIST)" "YES"
369 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
371 # We assume that the stage2 compiler depends on all the libraries, so
372 # they all get added to the package database before we try to configure
374 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
375 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
376 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
377 # haddock depends on ghc and some libraries, but depending on GHC's
378 # package-data.mk is sufficient, as that in turn depends on all the
380 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
382 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
384 # add the final two package.conf dependencies: ghc-prim depends on RTS,
385 # and RTS depends on libffi.
386 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
387 rts/package.conf.inplace : libffi/package.conf.inplace
390 # -----------------------------------------------------------------------------
391 # Special magic for the ghc-prim package
393 # We want the ghc-prim package to include the GHC.Prim module when it
394 # is registered, but not when it is built, because GHC.Prim is not a
395 # real source module, it is built-in to GHC. The old build system did
396 # this using Setup.hs, but we can't do that here, so we have a flag to
397 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
398 # remains compatible with the old build system for the time being).
399 # GHC.Prim module in the ghc-prim package with a flag:
401 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
403 # And then we strip it out again before building the package:
404 define libraries/ghc-prim_PACKAGE_MAGIC
405 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
408 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
410 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
411 "$(MKDIRHIER)" $(dir $@)
412 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
414 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
415 "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
418 # -----------------------------------------------------------------------------
419 # Include build instructions from all subdirs
421 # For the rationale behind the build phases, see
422 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
424 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
425 # "dist", just read the package-data.mk file, do not build anything".
427 # We carefully engineer things so that we can build the
428 # package-data.mk files early on: they depend only on a few tools also
429 # built early. Having got the package-data.mk files built, we can
430 # restart make with up-to-date information about all the packages
431 # (this is phase 0). The remaining problem is the .depend files:
433 # - .depend files in libraries need the stage 1 compiler to build
434 # - ghc/stage1/.depend needs compiler/stage1 built
435 # - compiler/stage1/.depend needs the bootstrap libs built
437 # GHC 6.11+ can build a .depend file without having built the
438 # dependencies of the package, but we can't rely on the bootstrapping
439 # compiler being able to do this, which is why we have to separate the
440 # three phases above.
442 # So this is the final ordering:
444 # Phase 0 : all package-data.mk files
445 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
446 # Phase 1 : .depend files for bootstrap libs
448 # Phase 2 : compiler/stage1/.depend
449 # (requires bootstrap libs and genprimopcode)
450 # Phase 3 : ghc/stage1/.depend
451 # (requires compiler/stage1)
453 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
457 ifneq "$(BINDIST)" "YES"
459 $(GHC_MKDEPENDC_DIR) \
466 libraries/Cabal/doc \
470 ifneq "$(GhcUnregisterised)" "YES"
476 ifneq "$(BINDIST)" "YES"
489 ifneq "$(BINDIST)" "YES"
499 ifneq "$(CLEANING)" "YES"
501 $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
502 ifneq "$(BootingFromHc)" "YES"
515 ifeq "$(Windows)" "YES"
520 # XXX libraries/% must come before any programs built with stage1, see
521 # Note [lib-depends].
524 $(foreach lib,$(BOOT_PKGS),$(eval \
525 libraries/$(lib)_dist-boot_DISABLE = YES))
528 ifneq "$(findstring $(phase),0 1)" ""
529 # We can build deps for compiler/stage1 in phase 2
530 compiler_stage1_DISABLE = YES
533 ifneq "$(findstring $(phase),0 1 2)" ""
534 ghc_stage1_DISABLE = YES
537 ifneq "$(findstring $(phase),0 1 2 3)" ""
538 # In phases 0-3, we disable stage2-3, the full libraries and haddock
539 utils/haddock_dist_DISABLE = YES
540 utils/runghc_dist_DISABLE = YES
541 utils/hpc_dist_DISABLE = YES
542 utils/hsc2hs_dist-install_DISABLE = YES
543 utils/ghc-pkg_dist-install_DISABLE = YES
544 compiler_stage2_DISABLE = YES
545 compiler_stage3_DISABLE = YES
546 ghc_stage2_DISABLE = YES
547 ghc_stage3_DISABLE = YES
548 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
549 libraries/$(lib)_dist-install_DISABLE = YES))
552 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
554 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
555 GhcLibHcOpts += -fno-warn-deprecated-flags
556 ifeq "$(ghc_ge_609)" "YES"
557 GhcBootLibHcOpts += -fno-warn-deprecated-flags
560 # Add $(GhcLibHcOpts) to all library builds
561 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
563 # XXX Hack; remove this
564 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
566 # XXX we configure packages with the bootstrapping compiler (for
567 # dependency reasons, see the phase ordering), which doesn't
568 # necessarily support all the extensions we need, and Cabal filters
569 # out the ones it thinks aren't supported.
570 libraries/base3-compat_dist-install_HC_OPTS += -XPackageImports
572 # A useful pseudo-target
574 stage1_libs : $(ALL_STAGE1_LIBS)
576 # -----------------------------------------------------------------------------
577 # Bootstrapping libraries
579 # We need to build a few libraries with the installed GHC, since GHC itself
580 # and some of the tools depend on them:
582 ifneq "$(BINDIST)" "YES"
584 ifneq "$(BOOTSTRAPPING_CONF)" ""
585 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
586 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
590 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
592 # These three libraries do not depend on each other, so we can build
595 $(eval $(call build-package,libraries/hpc,dist-boot,0))
596 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
597 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
599 # register the boot packages in strict sequence, because running
600 # multiple ghc-pkgs in parallel doesn't work (registrations may get
603 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
605 compiler/stage1/package-data.mk : \
606 libraries/Cabal/dist-boot/package-data.mk \
607 libraries/hpc/dist-boot/package-data.mk \
608 libraries/extensible-exceptions/dist-boot/package-data.mk
610 # These are necessary because the bootstrapping compiler may not know
611 # about cross-package dependencies:
612 $(compiler_stage1_depfile) : $(BOOT_LIBS)
613 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
615 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
619 # -----------------------------------------------------------------------------
620 # Creating a local mingw copy on Windows
622 ifeq "$(Windows)" "YES"
624 # directories don't work well as dependencies, hence a stamp file
625 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
626 $(MKDIRHIER) $(INPLACE_MINGW)/bin
627 GCC=`type -p $(WhatGccIsCalled)`; \
628 GccDir=`dirname $$GCC`; \
629 "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
630 "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
631 "$(CP)" -Rp $$GccDir/../lib $(INPLACE_MINGW); \
632 "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
633 "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
634 touch $(INPLACE)/stamp-mingw
636 install : install_mingw
637 .PHONY: install_mingw
638 install_mingw : $(INPLACE_MINGW)
639 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
641 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
642 "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
646 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
647 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
648 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
650 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
651 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
652 "$(MKDIRHIER)" $(dir $@)
653 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
655 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
656 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
657 "$(MKDIRHIER)" $(dir $@)
658 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
660 # -----------------------------------------------------------------------------
663 install: install_packages install_libs install_libexecs install_headers \
664 install_libexec_scripts install_bins
666 install_bins: $(INSTALL_BINS)
667 $(INSTALL_DIR) $(DESTDIR)$(bindir)
668 for i in $(INSTALL_BINS); do \
669 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ; \
670 if test "$(darwin_TARGET_OS)" = "1"; then \
671 sh mk/fix_install_names.sh $(libdir) $(DESTDIR)$(bindir)/$$i ; \
675 install_libs: $(INSTALL_LIBS)
676 $(INSTALL_DIR) $(DESTDIR)$(libdir)
677 for i in $(INSTALL_LIBS); do \
680 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
681 $(RANLIB) $(DESTDIR)$(libdir)/`basename $$i` ;; \
683 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
685 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
687 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
688 install_name_tool -id $(DESTDIR)$(libdir)/`basename $$i` $(DESTDIR)$(libdir)/`basename $$i` ;; \
690 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
694 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
695 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
696 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
697 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(libexecdir); \
700 install_libexecs: $(INSTALL_LIBEXECS)
701 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
702 for i in $(INSTALL_LIBEXECS); do \
703 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(libexecdir); \
706 install_headers: $(INSTALL_HEADERS)
707 $(INSTALL_DIR) $(DESTDIR)$(headerdir)
708 for i in $(INSTALL_HEADERS); do \
709 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(headerdir); \
712 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(libdir)/package.conf
714 # Install packages in the right order, so that ghc-pkg doesn't complain.
715 # Also, install ghc-pkg first.
716 ifeq "$(Windows)" "NO"
717 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(libexecdir)/ghc-pkg
719 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
722 install_packages: install_libexecs
723 install_packages: libffi/package.conf.install rts/package.conf.install
724 "$(MKDIRHIER)" $(DESTDIR)$(libdir)
725 echo "[]" > $(INSTALLED_PACKAGE_CONF)
726 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
727 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
728 $(foreach p, $(PACKAGES) $(PACKAGES_STAGE2),\
729 "$(GHC_CABAL_INPLACE)" install \
730 $(INSTALLED_GHC_PKG_REAL) \
731 $(INSTALLED_PACKAGE_CONF) \
732 libraries/$p dist-install \
733 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries' &&) true
734 "$(GHC_CABAL_INPLACE)" install \
735 $(INSTALLED_GHC_PKG_REAL) \
736 $(INSTALLED_PACKAGE_CONF) \
738 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries'
740 # -----------------------------------------------------------------------------
741 # Binary distributions
743 $(eval $(call bindist,.,\
745 configure config.sub config.guess install-sh \
749 $(INPLACE_BIN)/mkdirhier \
750 $(INPLACE_BIN)/ghc-cabal \
751 utils/ghc-pwd/ghc-pwd \
752 $(BINDIST_WRAPPERS) \
757 $(INSTALL_LIBEXECS) \
758 $(INSTALL_LIBEXEC_SCRIPTS) \
760 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
761 $(filter-out %/project.mk,$(filter-out mk/config.mk,$(MAKEFILE_LIST))) \
762 mk/fix_install_names.sh \
764 libraries/dph/LICENSE \
766 # mk/project.mk gets an absolute path, so we manually include it in
767 # the bindist with a relative path
770 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
771 mkdir $(BIN_DIST_NAME)
772 set -e; for i in LICENSE compiler ghc rts libraries utils gmp docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../$$i $(BIN_DIST_NAME)/; done
773 ln -s ../distrib/configure-bin.ac $(BIN_DIST_NAME)/configure.ac
774 cd $(BIN_DIST_NAME) && autoreconf
775 "$(RM)" $(RM_OPTS) $(BIN_DIST_TAR)
776 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
777 # tree then we want to include the real file, not a symlink to it
778 "$(TAR)" hcf - -T $(BIN_DIST_LIST) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
781 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
782 $(MAKE) prefix=$(BIN_DIST_DIR) install
783 "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
786 "$(ISCC)" /O. /F$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
788 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
790 .PHONY: publish-binary-dist
792 $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
793 ifeq "$(mingw32_TARGET_OS)" "1"
794 $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
797 # -----------------------------------------------------------------------------
798 # Source distributions
806 # A source dist is built from a complete build tree, because we
807 # require some extra files not contained in a darcs checkout: the
808 # output from Happy and Alex, for example.
810 # The steps performed by 'make dist' are as follows:
811 # - create a complete link-tree of the current build tree in /tmp
812 # - run 'make distclean' on that tree
813 # - remove a bunch of other files that we know shouldn't be in the dist
814 # - tar up first the extralibs package, then the main source package
817 # Directory in which we're going to build the src dist
819 SRC_DIST_NAME=ghc-$(ProjectVersion)
820 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
823 # Files to include in source distributions
825 SRC_DIST_DIRS = mk rules docs distrib bindisttest gmp libffi includes utils docs rts compiler ghc driver libraries
827 configure.ac config.guess config.sub configure \
828 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
829 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION boot ghc.mk
831 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
834 echo $(ProjectVersion) >VERSION
839 # $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
840 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
841 # "stage2" is the dist dir.
843 if test -f $(TOP)/$1/$2/build/$4.hs; then \
844 "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
845 mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
847 echo "does not exist: $1/$2//build/$4.hs"; \
853 "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
854 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
855 mkdir $(SRC_DIST_DIR)
856 ( cd $(SRC_DIST_DIR) \
857 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(TOP)/$$i ); done \
858 && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done \
859 && $(MAKE) distclean \
860 && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
861 && $(call sdist_file,compiler,stage2,cmm,CmmLex,x) \
862 && $(call sdist_file,compiler,stage2,cmm,CmmParse,y) \
863 && $(call sdist_file,compiler,stage2,main,ParsePkgConf,y) \
864 && $(call sdist_file,compiler,stage2,parser,HaddockLex,x) \
865 && $(call sdist_file,compiler,stage2,parser,HaddockParse,y) \
866 && $(call sdist_file,compiler,stage2,parser,Lexer,x) \
867 && $(call sdist_file,compiler,stage2,parser,Parser,y.pp) \
868 && $(call sdist_file,compiler,stage2,parser,ParserCore,y) \
869 && $(call sdist_file,utils/hpc,dist,,HpcParser,y) \
870 && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x) \
871 && $(call sdist_file,utils/genprimopcode,dist,,Parser,y) \
872 && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk \
873 && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r \
878 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
880 sdist-manifest : $(SRC_DIST_TARBALL)
881 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
883 # Upload the distribution(s)
884 # Retrying is to work around buggy firewalls that corrupt large file transfers
886 ifneq "$(PublishLocation)" ""
888 $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
891 ifeq "$(GhcUnregisterised)" "YES"
892 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
895 # -----------------------------------------------------------------------------
900 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
901 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
902 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
903 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
904 CLEAN_FILES += libraries/bootstrapping.conf
906 clean : clean_files clean_libraries
910 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
912 .PHONY: clean_libraries
914 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
915 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist-install, $(PACKAGES) $(PACKAGES_STAGE2))
916 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist-boot, $(PACKAGES) $(PACKAGES_STAGE2))
917 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
920 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
921 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
922 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
923 "$(RM)" $(RM_OPTS) compiler/ghc.cabal ghc/ghc-bin.cabal
924 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
925 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
926 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
927 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
928 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
929 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
930 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
931 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
932 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
934 maintainer-clean : distclean
935 "$(RM)" $(RM_OPTS) configure mk/config.h.in
936 "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
937 "$(RM)" $(RM_OPTS) ghc.spec
938 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
939 $(PACKAGES) $(PACKAGES_STAGE2))
940 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
941 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
942 $(PACKAGES) $(PACKAGES_STAGE2))
943 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
944 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
945 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
946 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
947 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
949 .PHONY: all_libraries
951 .PHONY: bootstrapping-files
952 bootstrapping-files: $(OTHER_LIBS)
953 bootstrapping-files: includes/ghcautoconf.h
954 bootstrapping-files: includes/DerivedConstants.h
955 bootstrapping-files: includes/GHCConstants.h