ghc.mk

   1 # -----------------------------------------------------------------------------
   2 #
   3 # (c) 2009 The University of Glasgow
   4 #
   5 # This file is part of the GHC build system.
   6 #
   7 # To understand how the build system works and how to modify it, see
   8 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
   9 #      http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
  10 #
  11 # -----------------------------------------------------------------------------
  12
  13 # ToDo List.
  14 #
  15 #   * finish installation
  16 #     * Windows: should we have ghc-pkg-<version>?
  17 #     * should we be stripping things?
  18 #     * install libgmp.a, gmp.h
  19 #   * need to fix Cabal for new Windows layout, see
  20 #     Distribution/Simple/GHC.configureToolchain.
  21 #   * remove old Makefiles, add new stubs for building in subdirs
  22 #     * docs/Makefile
  23 #     * docs/docbook-cheat-sheet/Makefile
  24 #     * docs/ext-core/Makefile
  25 #     * docs/man/Makefile
  26 #     * docs/storage-mgmt/Makefile
  27 #     * docs/vh/Makefile
  28 #     * rts/dotnet/Makefile
  29 #     * utils/Makefile
  30 #   * optionally install stage3?
  31 #   * add Makefiles for the rest of the utils/ programs that aren't built
  32 #     by default (need to exclude them from 'make all' too)
  33 #
  34 # Tickets we can now close, or fix and close:
  35 #
  36 #   * 1693 make distclean
  37
  38 # Possible cleanups:
  39 #
  40 #   * per-source-file dependencies instead of one .depend file?
  41 #   * eliminate undefined variables, and use --warn-undefined-variables?
  42 #   * put outputs from different ways in different subdirs of distdir/build,
  43 #     then we don't have to use -osuf/-hisuf.  We would have to install
  44 #     them in different places too, so we'd need ghc-pkg support for packages
  45 #     of different ways.
  46 #   * make PACKAGES generated by configure or sh boot?
  47 #   * we should use a directory of package.conf files rather than a single
  48 #     file for the inplace package database, so that we can express
  49 #     dependencies more accurately.  Otherwise it's possible to get into
  50 #     a state where the package database is out of date, and the build
  51 #     system doesn't know.
  52
  53 # Approximate build order.
  54 #
  55 # The actual build order is defined by dependencies, and the phase
  56 # ordering used to ensure correct ordering of makefile-generation; see
  57 #    http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
  58 #
  59 #     * With bootstrapping compiler:
  60 #           o Build utils/ghc-cabal
  61 #           o Build utils/ghc-pkg
  62 #           o Build utils/hsc2hs
  63 #     * For each package:
  64 #           o configure, generate package-data.mk and inplace-pkg-info
  65 #           o register each package into inplace/lib/package.conf
  66 #     * build libffi
  67 #     * With bootstrapping compiler:
  68 #           o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
  69 #           o Build compiler (stage 1)
  70 #     * With stage 1:
  71 #           o Build libraries/*
  72 #           o Build rts
  73 #           o Build utils/* (except haddock)
  74 #           o Build compiler (stage 2)
  75 #     * With stage 2:
  76 #           o Build utils/haddock
  77 #           o Build compiler (stage 3) (optional)
  78 #     * With haddock:
  79 #           o libraries/*
  80 #           o compiler
  81
  82 .PHONY: default all haddock
  83
  84 # We need second expansion for the way we handle directories, so that
  85 #     | $$$$(dir $$$$@)/.
  86 # expands to the directoy of a rule that uses a % pattern.
  87 .SECONDEXPANSION:
  88
  89 default : all
  90
  91 # Catch make if it runs away into an infinite loop
  92 ifeq      "$(MAKE_RESTARTS)" ""
  93 else ifeq "$(MAKE_RESTARTS)" "1"
  94 else ifeq "$(MAKE_RESTARTS)" "2"
  95 else
  96 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
  97 endif
  98
  99 # Just bring makefiles up to date:
 100 .PHONY: just-makefiles
 101 just-makefiles:
 102         @:
 103
 104 # -----------------------------------------------------------------------------
 105 # Misc GNU make utils
 106
 107 nothing=
 108 space=$(nothing) $(nothing)
 109 comma=,
 110
 111 # Cancel all suffix rules.  Ideally we'd like to have 'make -r' turned on
 112 # by default, because that disables all the implicit rules, but there doesn't
 113 # seem to be a good way to do that.  This turns off all the old-style suffix
 114 # rules, which does half the job and speeds up make quite a bit:
 115 .SUFFIXES:
 116
 117 # -----------------------------------------------------------------------------
 118 #                       Makefile debugging
 119 # to see the effective value used for a Makefile variable, do
 120 #  make show VALUE=MY_VALUE
 121 #
 122
 123 show:
 124         @echo '$(VALUE)="$($(VALUE))"'
 125
 126 # -----------------------------------------------------------------------------
 127 # Include subsidiary build-system bits
 128
 129 include mk/tree.mk
 130
 131 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 132 include mk/config.mk
 133 ifeq "$(ProjectVersion)" ""
 134 $(error Please run ./configure first)
 135 endif
 136 endif
 137
 138 include mk/ways.mk
 139
 140 # (Optional) build-specific configuration
 141 include mk/custom-settings.mk
 142
 143 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
 144 ifeq "$(GhcLibWays)" ""
 145 $(error $$(GhcLibWays) is empty, it must contain at least one way)
 146 endif
 147 endif
 148
 149 # -----------------------------------------------------------------------------
 150 # Macros for standard targets
 151
 152 include rules/all-target.mk
 153 include rules/clean-target.mk
 154
 155 # -----------------------------------------------------------------------------
 156 # The inplace tree
 157
 158 $(eval $(call clean-target,inplace,,inplace))
 159
 160 # -----------------------------------------------------------------------------
 161 # Whether to build dependencies or not
 162
 163 # When we're just doing 'make clean' or 'make show', then we don't need
 164 # to build dependencies.
 165
 166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
 167 NO_INCLUDE_DEPS = YES
 168 NO_INCLUDE_PKGDATA = YES
 169 endif
 170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
 171 NO_INCLUDE_DEPS = YES
 172 NO_INCLUDE_PKGDATA = YES
 173 endif
 174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
 175 NO_INCLUDE_DEPS = YES
 176 # We want package-data.mk for show
 177 endif
 178
 179 # We don't haddock the bootstrapping libraries
 180 libraries/hpc_dist-boot_DO_HADDOCK = NO
 181 libraries/Cabal_dist-boot_DO_HADDOCK = NO
 182 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
 183 libraries/filepath_dist-boot_DO_HADDOCK = NO
 184 libraries/binary_dist-boot_DO_HADDOCK = NO
 185 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
 186
 187 # -----------------------------------------------------------------------------
 188 # Ways
 189
 190 include rules/way-prelims.mk
 191
 192 $(foreach way,$(ALL_WAYS),\
 193   $(eval $(call way-prelims,$(way))))
 194
 195 # -----------------------------------------------------------------------------
 196 # Compilation Flags
 197
 198 include rules/distdir-way-opts.mk
 199
 200 # -----------------------------------------------------------------------------
 201 # Finding source files and object files
 202
 203 include rules/hs-sources.mk
 204 include rules/c-sources.mk
 205 include rules/includes-sources.mk
 206 include rules/hs-objs.mk
 207 include rules/c-objs.mk
 208 include rules/cmm-objs.mk
 209
 210 # -----------------------------------------------------------------------------
 211 # Suffix rules
 212
 213 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
 214 # so we don't make any when cleaning.
 215 ifneq "$(CLEANING)" "YES"
 216
 217 include rules/hs-suffix-rules-srcdir.mk
 218 include rules/hs-suffix-rules.mk
 219
 220 # -----------------------------------------------------------------------------
 221 # Suffix rules for .hi files
 222
 223 include rules/hi-rule.mk
 224
 225 $(foreach way,$(ALL_WAYS),\
 226   $(eval $(call hi-rule,$(way))))
 227
 228 #-----------------------------------------------------------------------------
 229 # C-related suffix rules
 230
 231 include rules/c-suffix-rules.mk
 232
 233 #-----------------------------------------------------------------------------
 234 # CMM-related suffix rules
 235
 236 include rules/cmm-suffix-rules.mk
 237
 238 endif
 239
 240 # -----------------------------------------------------------------------------
 241 # Building package-data.mk files from .cabal files
 242
 243 include rules/package-config.mk
 244
 245 # -----------------------------------------------------------------------------
 246 # Building dependencies
 247
 248 include rules/build-dependencies.mk
 249
 250 # -----------------------------------------------------------------------------
 251 # Build package-data.mk files
 252
 253 include rules/build-package-data.mk
 254
 255 # -----------------------------------------------------------------------------
 256 # Build and install a program
 257
 258 include rules/build-prog.mk
 259 include rules/shell-wrapper.mk
 260
 261 # -----------------------------------------------------------------------------
 262 # Build a perl script
 263
 264 include rules/build-perl.mk
 265
 266 # -----------------------------------------------------------------------------
 267 # Build a package
 268
 269 include rules/build-package.mk
 270 include rules/build-package-way.mk
 271 include rules/haddock.mk
 272
 273 # -----------------------------------------------------------------------------
 274 # Registering hand-written package descriptions (used in libffi and rts)
 275
 276 include rules/manual-package-config.mk
 277
 278 # -----------------------------------------------------------------------------
 279 # Docs
 280
 281 include rules/docbook.mk
 282
 283 # -----------------------------------------------------------------------------
 284 # Making bindists
 285
 286 include rules/bindist.mk
 287
 288 # -----------------------------------------------------------------------------
 289 # Building libraries
 290
 291 define addPackage # args: $1 = package, $2 = condition
 292     ifneq "$2" ""
 293         ifeq "$$(CLEANING)" "YES"
 294             PACKAGES += $1
 295         else
 296             ifeq $2
 297                 PACKAGES += $1
 298             endif
 299         endif
 300     else
 301         PACKAGES += $1
 302     endif
 303 endef
 304
 305 $(eval $(call addPackage,ghc-prim))
 306 ifeq "$(CLEANING)" "YES"
 307 $(eval $(call addPackage,integer-gmp))
 308 $(eval $(call addPackage,integer-simple))
 309 else
 310 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
 311 endif
 312 $(eval $(call addPackage,base))
 313 $(eval $(call addPackage,filepath))
 314 $(eval $(call addPackage,array))
 315 $(eval $(call addPackage,bytestring))
 316 $(eval $(call addPackage,containers))
 317
 318 $(eval $(call addPackage,Win32,($$(Windows),YES)))
 319 $(eval $(call addPackage,unix,($$(Windows),NO)))
 320
 321 $(eval $(call addPackage,old-locale))
 322 $(eval $(call addPackage,old-time))
 323 $(eval $(call addPackage,time))
 324 $(eval $(call addPackage,directory))
 325 $(eval $(call addPackage,process))
 326 $(eval $(call addPackage,random))
 327 $(eval $(call addPackage,extensible-exceptions))
 328 $(eval $(call addPackage,haskell98))
 329 $(eval $(call addPackage,hpc))
 330 $(eval $(call addPackage,pretty))
 331 $(eval $(call addPackage,template-haskell))
 332 $(eval $(call addPackage,Cabal))
 333 $(eval $(call addPackage,binary))
 334 $(eval $(call addPackage,bin-package-db))
 335 $(eval $(call addPackage,mtl))
 336 $(eval $(call addPackage,utf8-string))
 337
 338 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
 339
 340 $(eval $(call addPackage,haskeline))
 341
 342 ifneq "$(BootingFromHc)" "YES"
 343 PACKAGES_STAGE2 += \
 344         dph/dph-base \
 345         dph/dph-prim-interface \
 346         dph/dph-prim-seq \
 347         dph/dph-prim-par \
 348         dph/dph-seq \
 349         dph/dph-par
 350 endif
 351
 352 # We assume that the stage0 compiler has a suitable bytestring package,
 353 # so we don't have to include it below.
 354 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
 355
 356 # The actual .a and .so/.dll files: needed for dependencies.
 357 ALL_STAGE1_LIBS  = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
 358 ifeq "$(BuildSharedLibs)" "YES"
 359 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
 360 endif
 361 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
 362
 363 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
 364 ifeq "$(BuildSharedLibs)" "YES"
 365 OTHER_LIBS  += libffi/libHSffi$(dyn_libsuf)
 366 endif
 367
 368 # We cannot run ghc-cabal to configure a package until we have
 369 # configured and registered all of its dependencies.  So the following
 370 # hack forces all the configure steps to happen in exactly the order
 371 # given in the PACKAGES variable above.  Ideally we should use the
 372 # correct dependencies here to allow more parallelism, but we don't
 373 # know the dependencies until we've generated the pacakge-data.mk
 374 # files.
 375 define fixed_pkg_dep
 376 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
 377 fixed_pkg_prev:=$1
 378 endef
 379
 380 ifneq "$(BINDIST)" "YES"
 381 fixed_pkg_prev=
 382 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
 383
 384 # We assume that the stage2 compiler depends on all the libraries, so
 385 # they all get added to the package database before we try to configure
 386 # it
 387 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
 388 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
 389 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
 390 # haddock depends on ghc and some libraries, but depending on GHC's
 391 # package-data.mk is sufficient, as that in turn depends on all the
 392 # libraries
 393 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
 394
 395 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
 396
 397 # add the final two package.conf dependencies: ghc-prim depends on RTS,
 398 # and RTS depends on libffi.
 399 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
 400 rts/package.conf.inplace : libffi/package.conf.inplace
 401 endif
 402
 403 # -----------------------------------------------------------------------------
 404 # Directories
 405
 406 # Don't try to delete directories:
 407 .PRECIOUS: %/.
 408
 409 %/. : $(MKDIRHIER)
 410         "$(MKDIRHIER)" $@
 411
 412 # -----------------------------------------------------------------------------
 413 # Special magic for the ghc-prim package
 414
 415 # We want the ghc-prim package to include the GHC.Prim module when it
 416 # is registered, but not when it is built, because GHC.Prim is not a
 417 # real source module, it is built-in to GHC.  The old build system did
 418 # this using Setup.hs, but we can't do that here, so we have a flag to
 419 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
 420 # remains compatible with the old build system for the time being).
 421 # GHC.Prim module in the ghc-prim package with a flag:
 422 #
 423 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
 424
 425 # And then we strip it out again before building the package:
 426 define libraries/ghc-prim_PACKAGE_MAGIC
 427 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
 428 endef
 429
 430 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
 431
 432 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
 433         "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
 434
 435 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
 436         "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
 437
 438
 439 # -----------------------------------------------------------------------------
 440 # Include build instructions from all subdirs
 441
 442 # For the rationale behind the build phases, see
 443 #   http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
 444
 445 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
 446 # "dist", just read the package-data.mk file, do not build anything".
 447
 448 # We carefully engineer things so that we can build the
 449 # package-data.mk files early on: they depend only on a few tools also
 450 # built early.  Having got the package-data.mk files built, we can
 451 # restart make with up-to-date information about all the packages
 452 # (this is phase 0).  The remaining problem is the .depend files:
 453 #
 454 #   - .depend files in libraries need the stage 1 compiler to build
 455 #   - ghc/stage1/.depend needs compiler/stage1 built
 456 #   - compiler/stage1/.depend needs the bootstrap libs built
 457 #
 458 # GHC 6.11+ can build a .depend file without having built the
 459 # dependencies of the package, but we can't rely on the bootstrapping
 460 # compiler being able to do this, which is why we have to separate the
 461 # three phases above.
 462
 463 # So this is the final ordering:
 464
 465 # Phase 0 : all package-data.mk files
 466 #           (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
 467 # Phase 1 : .depend files for bootstrap libs
 468 #           (requires hsc2hs)
 469 # Phase 2 : compiler/stage1/.depend
 470 #           (requires bootstrap libs and genprimopcode)
 471 # Phase 3 : ghc/stage1/.depend
 472 #           (requires compiler/stage1)
 473 #
 474 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
 475
 476 BUILD_DIRS =
 477
 478 ifneq "$(BINDIST)" "YES"
 479 BUILD_DIRS += \
 480    $(GHC_MKDEPENDC_DIR) \
 481    $(GHC_MKDIRHIER_DIR)
 482 endif
 483
 484 BUILD_DIRS += \
 485    docs/users_guide \
 486    libraries/Cabal/doc \
 487    $(GHC_UNLIT_DIR) \
 488    $(GHC_HP2PS_DIR)
 489
 490 ifneq "$(GhcUnregisterised)" "YES"
 491 BUILD_DIRS += \
 492    $(GHC_MANGLER_DIR) \
 493    $(GHC_SPLIT_DIR)
 494 endif
 495
 496 ifneq "$(BINDIST)" "YES"
 497 BUILD_DIRS += \
 498    $(GHC_GENPRIMOP_DIR)
 499 endif
 500
 501 BUILD_DIRS += \
 502    driver \
 503    driver/ghci \
 504    driver/ghc \
 505    libffi \
 506    includes \
 507    rts
 508
 509 ifneq "$(BINDIST)" "YES"
 510 BUILD_DIRS += \
 511    $(GHC_CABAL_DIR) \
 512    $(GHC_GENAPPLY_DIR)
 513 endif
 514
 515 ifneq "$(HADDOCK_DOCS)" "NO"
 516 BUILD_DIRS += \
 517    utils/haddock \
 518    utils/haddock/doc
 519 endif
 520
 521 ifneq "$(CLEANING)" "YES"
 522 BUILD_DIRS += \
 523    $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
 524 ifneq "$(BootingFromHc)" "YES"
 525 BUILD_DIRS += \
 526    libraries/dph
 527 endif
 528 endif
 529
 530 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 531 BUILD_DIRS += libraries/integer-gmp/gmp
 532 endif
 533
 534 BUILD_DIRS += \
 535    compiler \
 536    $(GHC_HSC2HS_DIR) \
 537    $(GHC_PKG_DIR) \
 538    utils/hpc \
 539    utils/runghc \
 540    ghc
 541 ifeq "$(Windows)" "YES"
 542 BUILD_DIRS += \
 543    $(GHC_TOUCHY_DIR)
 544 endif
 545
 546 # XXX libraries/% must come before any programs built with stage1, see
 547 # Note [lib-depends].
 548
 549 ifeq "$(phase)" "0"
 550 $(foreach lib,$(BOOT_PKGS),$(eval \
 551   libraries/$(lib)_dist-boot_DISABLE = YES))
 552 endif
 553
 554 ifneq "$(findstring $(phase),0 1)" ""
 555 # We can build deps for compiler/stage1 in phase 2
 556 compiler_stage1_DISABLE = YES
 557 endif
 558
 559 ifneq "$(findstring $(phase),0 1 2)" ""
 560 ghc_stage1_DISABLE = YES
 561 endif
 562
 563 ifneq "$(CLEANING)" "YES"
 564 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
 565 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
 566 else
 567     ifeq "$(INTEGER_LIBRARY)" "integer-simple"
 568         libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
 569     else
 570 $(error Unknown integer library: $(INTEGER_LIBRARY))
 571     endif
 572 endif
 573 endif
 574
 575 ifneq "$(findstring $(phase),0 1 2 3)" ""
 576 # In phases 0-3, we disable stage2-3, the full libraries and haddock
 577 utils/haddock_dist_DISABLE = YES
 578 utils/runghc_dist_DISABLE = YES
 579 utils/hpc_dist_DISABLE = YES
 580 utils/hsc2hs_dist-install_DISABLE = YES
 581 utils/ghc-pkg_dist-install_DISABLE = YES
 582 compiler_stage2_DISABLE = YES
 583 compiler_stage3_DISABLE = YES
 584 ghc_stage2_DISABLE = YES
 585 ghc_stage3_DISABLE = YES
 586 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
 587   libraries/$(lib)_dist-install_DISABLE = YES))
 588 endif
 589
 590 # These packages don't pass the Cabal checks because hs-source-dirs
 591 # points outside the source directory. This isn't a real problem in
 592 # these cases, so we just skip checking them.
 593 CHECKED_libraries/dph/dph-seq = YES
 594 CHECKED_libraries/dph/dph-par = YES
 595 # In compiler's case, include-dirs points outside of the source tree
 596 CHECKED_compiler = YES
 597
 598 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
 599
 600 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
 601 GhcLibHcOpts += -fno-warn-deprecated-flags
 602 ifeq "$(ghc_ge_609)" "YES"
 603 GhcBootLibHcOpts += -fno-warn-deprecated-flags
 604 endif
 605
 606 # Add $(GhcLibHcOpts) to all library builds
 607 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
 608
 609 # XXX Hack; remove this
 610 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
 611
 612 # A useful pseudo-target
 613 .PHONY: stage1_libs
 614 stage1_libs : $(ALL_STAGE1_LIBS)
 615
 616 ifeq "$(HADDOCK_DOCS)" "YES"
 617 libraries/index.html: $(ALL_HADDOCK_FILES)
 618         cd libraries && sh gen_contents_index --inplace
 619 $(eval $(call all-target,library_doc_index,libraries/index.html))
 620 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
 621 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
 622                libraries/haddock*.js libraries/index*.html libraries/*.gif
 623 endif
 624
 625 ifeq "$(CHECK_PACKAGES)" "YES"
 626 all: check_packages
 627 endif
 628
 629 # -----------------------------------------------------------------------------
 630 # Bootstrapping libraries
 631
 632 # We need to build a few libraries with the installed GHC, since GHC itself
 633 # and some of the tools depend on them:
 634
 635 ifneq "$(BINDIST)" "YES"
 636
 637 ifneq "$(BOOTSTRAPPING_CONF)" ""
 638 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
 639 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
 640 endif
 641 endif
 642
 643 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
 644
 645 # These three libraries do not depend on each other, so we can build
 646 # them straight off:
 647
 648 $(eval $(call build-package,libraries/hpc,dist-boot,0))
 649 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
 650 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
 651 $(eval $(call build-package,libraries/binary,dist-boot,0))
 652 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
 653
 654 # register the boot packages in strict sequence, because running
 655 # multiple ghc-pkgs in parallel doesn't work (registrations may get
 656 # lost).
 657 fixed_pkg_prev=
 658 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
 659
 660 compiler/stage1/package-data.mk : \
 661     libraries/Cabal/dist-boot/package-data.mk \
 662     libraries/hpc/dist-boot/package-data.mk \
 663     libraries/extensible-exceptions/dist-boot/package-data.mk \
 664     libraries/bin-package-db/dist-boot/package-data.mk
 665
 666 # These are necessary because the bootstrapping compiler may not know
 667 # about cross-package dependencies:
 668 $(compiler_stage1_depfile) : $(BOOT_LIBS)
 669 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
 670
 671 # A few careful dependencies between bootstrapping packages.  When we
 672 # can rely on the stage 0 compiler being able to generate
 673 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
 674 # these, and also some of the phases.
 675 #
 676 # If you miss any out here, then 'make -j8' will probably tell you.
 677 #
 678 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
 679
 680 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
 681
 682 endif
 683
 684 # -----------------------------------------------------------------------------
 685 # Creating a local mingw copy on Windows
 686
 687 ifeq "$(Windows)" "YES"
 688
 689 # directories don't work well as dependencies, hence a stamp file
 690 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
 691         $(MKDIRHIER) $(INPLACE_MINGW)/bin
 692         GCC=`type -p $(WhatGccIsCalled)`; \
 693         GccDir=`dirname $$GCC`; \
 694         "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
 695         "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
 696         "$(CP)" -Rp $$GccDir/../lib     $(INPLACE_MINGW); \
 697         "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
 698         "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
 699         touch $(INPLACE)/stamp-mingw
 700
 701 install : install_mingw
 702 .PHONY: install_mingw
 703 install_mingw : $(INPLACE_MINGW)
 704         "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
 705
 706 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
 707         "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
 708
 709 endif # Windows
 710
 711 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
 712     libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
 713     libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
 714
 715 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
 716                             $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
 717                           | $$(dir $$@)/.
 718         "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
 719
 720 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
 721                             $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
 722                           | $$(dir $$@)/.
 723         "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
 724
 725 # -----------------------------------------------------------------------------
 726 # Installation
 727
 728 install: install_packages install_libs install_libexecs install_headers \
 729          install_libexec_scripts install_bins install_docs \
 730                  install_topdirs install_topdir_scripts
 731
 732 install_bins: $(INSTALL_BINS)
 733         $(INSTALL_DIR) $(DESTDIR)$(bindir)
 734         for i in $(INSTALL_BINS); do \
 735                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ;  \
 736                 if test "$(darwin_TARGET_OS)" = "1"; then \
 737                    sh mk/fix_install_names.sh $(ghclibdir) $(DESTDIR)$(bindir)/$$i ; \
 738                 fi ; \
 739         done
 740
 741 install_libs: $(INSTALL_LIBS)
 742         $(INSTALL_DIR) $(DESTDIR)$(ghclibdir)
 743         for i in $(INSTALL_LIBS); do \
 744                 case $$i in \
 745                   *.a) \
 746                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
 747                     $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
 748                   *.dll) \
 749                     $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir) ;; \
 750                   *.so) \
 751                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir) ;; \
 752                   *.dylib) \
 753                     $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
 754                     install_name_tool -id $(DESTDIR)$(ghclibdir)/`basename $$i` $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
 755                   *) \
 756                     $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
 757                 esac; \
 758         done
 759
 760 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
 761         $(INSTALL_DIR) $(DESTDIR)$(ghclibexecdir)
 762         for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
 763                 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibexecdir); \
 764         done
 765
 766 install_libexecs:  $(INSTALL_LIBEXECS)
 767         $(INSTALL_DIR) $(DESTDIR)$(ghclibexecdir)
 768         for i in $(INSTALL_LIBEXECS); do \
 769                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(ghclibexecdir); \
 770         done
 771
 772 install_topdir_scripts: $(INSTALL_TOPDIR_SCRIPTS)
 773         $(INSTALL_DIR) $(DESTDIR)$(topdir)
 774         for i in $(INSTALL_TOPDIR_SCRIPTS); do \
 775                 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(topdir); \
 776         done
 777
 778 install_topdirs: $(INSTALL_TOPDIRS)
 779         $(INSTALL_DIR) $(DESTDIR)$(topdir)
 780         for i in $(INSTALL_TOPDIRS); do \
 781                 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(topdir); \
 782         done
 783
 784 install_headers: $(INSTALL_HEADERS)
 785         $(INSTALL_DIR) $(DESTDIR)$(ghcheaderdir)
 786         for i in $(INSTALL_HEADERS); do \
 787                 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghcheaderdir); \
 788         done
 789
 790 install_docs: $(INSTALL_HEADERS)
 791         $(INSTALL_DIR) $(DESTDIR)$(docdir)
 792         for i in $(INSTALL_DOCS); do \
 793                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i $(DESTDIR)$(docdir); \
 794         done
 795         $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html; \
 796         $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html $(DESTDIR)$(docdir)/html; \
 797         for i in $(INSTALL_LIBRARY_DOCS); do \
 798                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i $(DESTDIR)$(docdir)/html/libraries/; \
 799         done
 800         for i in $(INSTALL_HTML_DOC_DIRS); do \
 801                 $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html/`basename $$i`; \
 802                 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* $(DESTDIR)$(docdir)/html/`basename $$i`; \
 803         done
 804
 805 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
 806
 807 # Install packages in the right order, so that ghc-pkg doesn't complain.
 808 # Also, install ghc-pkg first.
 809 ifeq "$(Windows)" "NO"
 810 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-stage2
 811 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
 812 else
 813 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
 814 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
 815 endif
 816
 817 INSTALLED_PACKAGES = $(filter-out haskeline mtl terminfo,$(PACKAGES))
 818 HIDDEN_PACKAGES = binary
 819
 820 install_packages: install_libexecs
 821 install_packages: libffi/package.conf.install rts/package.conf.install
 822         $(INSTALL_DIR) $(DESTDIR)$(topdir)
 823         "$(RM)" -r $(RM_OPTS) $(INSTALLED_PACKAGE_CONF)
 824         $(INSTALL_DIR) $(INSTALLED_PACKAGE_CONF)
 825         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
 826         "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
 827         $(foreach p, $(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
 828             "$(GHC_CABAL_INPLACE)" install \
 829                  $(INSTALLED_GHC_REAL) \
 830                  $(INSTALLED_GHC_PKG_REAL) \
 831                  $(DESTDIR)$(topdir) \
 832                  libraries/$p dist-install \
 833                  '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
 834                  $(RelocatableBuild) &&) true
 835         $(foreach p, $(HIDDEN_PACKAGES),\
 836             $(INSTALLED_GHC_PKG_REAL) --global-conf $(INSTALLED_PACKAGE_CONF) \
 837                                       hide $p &&) true
 838         "$(GHC_CABAL_INPLACE)" install \
 839                  $(INSTALLED_GHC_REAL) \
 840                  $(INSTALLED_GHC_PKG_REAL) \
 841                  $(DESTDIR)$(topdir) \
 842                  compiler stage2 \
 843                  '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
 844                  $(RelocatableBuild)
 845
 846 # -----------------------------------------------------------------------------
 847 # Binary distributions
 848
 849 ifneq "$(CLEANING)" "YES"
 850 # This rule seems to hold some files open on Windows which prevents
 851 # cleaning, perhaps due to the $(wildcard).
 852
 853 $(eval $(call bindist,.,\
 854     LICENSE \
 855     configure config.sub config.guess install-sh \
 856     extra-gcc-opts.in \
 857     Makefile \
 858     mk/config.mk.in \
 859     $(INPLACE_BIN)/mkdirhier \
 860     $(INPLACE_BIN)/ghc-cabal \
 861     utils/ghc-pwd/ghc-pwd \
 862         $(BINDIST_WRAPPERS) \
 863         $(BINDIST_LIBS) \
 864         $(BINDIST_HI) \
 865         $(BINDIST_EXTRAS) \
 866         $(includes_H_CONFIG) \
 867         $(includes_H_PLATFORM) \
 868         includes/ghcconfig.h \
 869         includes/rts/Config.h \
 870     $(INSTALL_HEADERS) \
 871     $(INSTALL_LIBEXECS) \
 872     $(INSTALL_LIBEXEC_SCRIPTS) \
 873     $(INSTALL_TOPDIRS) \
 874     $(INSTALL_TOPDIR_SCRIPTS) \
 875     $(INSTALL_BINS) \
 876     $(INSTALL_DOCS) \
 877     $(INSTALL_LIBRARY_DOCS) \
 878     $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
 879         docs/index.html \
 880         $(wildcard libraries/*/dist-install/doc/) \
 881     $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
 882     $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
 883         mk/fix_install_names.sh \
 884         mk/project.mk \
 885         mk/install.mk.in \
 886         bindist.mk \
 887         libraries/dph/LICENSE \
 888  ))
 889 endif
 890 # mk/project.mk gets an absolute path, so we manually include it in
 891 # the bindist with a relative path
 892
 893 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
 894
 895 unix-binary-dist-prep:
 896         "$(RM)" $(RM_OPTS) -r bindistprep/*
 897         mkdir $(BIN_DIST_PREP_DIR)
 898         set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
 899         echo "HADDOCK_DOCS       = $(HADDOCK_DOCS)"       >> $(BIN_DIST_MK)
 900         echo "LATEX_DOCS         = $(LATEX_DOCS)"         >> $(BIN_DIST_MK)
 901         echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
 902         echo "BUILD_DOCBOOK_PS   = $(BUILD_DOCBOOK_PS)"   >> $(BIN_DIST_MK)
 903         echo "BUILD_DOCBOOK_PDF  = $(BUILD_DOCBOOK_PDF)"  >> $(BIN_DIST_MK)
 904         ln -s ../../distrib/configure-bin.ac $(BIN_DIST_PREP_DIR)/configure.ac
 905         cd $(BIN_DIST_PREP_DIR) && autoreconf
 906         "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
 907 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
 908 # tree then we want to include the real file, not a symlink to it
 909         cd bindistprep && "$(TAR)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
 910
 911 windows-binary-dist-prep:
 912         "$(RM)" $(RM_OPTS) -r bindistprep/*
 913         $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
 914         cd bindistprep && "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
 915
 916 windows-installer:
 917         "$(ISCC)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
 918
 919 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
 920
 921 .PHONY: publish-binary-dist
 922 publish-binary-dist:
 923         $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
 924 ifeq "$(mingw32_TARGET_OS)" "1"
 925         $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
 926 endif
 927
 928 .PHONY: publish-docs
 929 publish-docs:
 930         $(call nTimes,10,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
 931
 932 # -----------------------------------------------------------------------------
 933 # Source distributions
 934
 935 # Do it like this:
 936 #
 937 #       $ make
 938 #       $ make sdist
 939 #
 940
 941 # A source dist is built from a complete build tree, because we
 942 # require some extra files not contained in a darcs checkout: the
 943 # output from Happy and Alex, for example.
 944 #
 945 # The steps performed by 'make dist' are as follows:
 946 #   - create a complete link-tree of the current build tree in /tmp
 947 #   - run 'make distclean' on that tree
 948 #   - remove a bunch of other files that we know shouldn't be in the dist
 949 #   - tar up first the extralibs package, then the main source package
 950
 951 #
 952 # Directory in which we're going to build the src dist
 953 #
 954 SRC_DIST_NAME=ghc-$(ProjectVersion)
 955 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
 956
 957 #
 958 # Files to include in source distributions
 959 #
 960 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries
 961 SRC_DIST_FILES += \
 962         configure.ac config.guess config.sub configure \
 963         aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
 964         ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
 965         boot boot-pkgs packages ghc.mk
 966
 967 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
 968
 969 VERSION :
 970         echo $(ProjectVersion) >VERSION
 971
 972 sdist : VERSION
 973
 974 # Use:
 975 #     $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
 976 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
 977 # "stage2" is the dist dir.
 978 sdist_file = \
 979   if test -f $(TOP)/$1/$2/build/$4.hs; then \
 980     "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
 981     mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
 982   else \
 983     echo "does not exist: $1/$2/build/$4.hs"; \
 984     exit 1; \
 985   fi
 986
 987 .PHONY: sdist-prep
 988 sdist-prep :
 989         "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
 990         "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
 991         mkdir $(SRC_DIST_DIR)
 992         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
 993         cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
 994         cd $(SRC_DIST_DIR) && $(MAKE) distclean
 995         rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
 996         rm -rf $(SRC_DIST_DIR)/libraries/stamp/
 997         cd $(SRC_DIST_DIR) && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi
 998         cd $(SRC_DIST_DIR) && $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
 999         cd $(SRC_DIST_DIR) && $(call sdist_file,compiler,stage2,cmm,CmmParse,y)
1000         cd $(SRC_DIST_DIR) && $(call sdist_file,compiler,stage2,parser,Lexer,x)
1001         cd $(SRC_DIST_DIR) && $(call sdist_file,compiler,stage2,parser,Parser,y.pp)
1002         cd $(SRC_DIST_DIR) && $(call sdist_file,compiler,stage2,parser,ParserCore,y)
1003         cd $(SRC_DIST_DIR) && $(call sdist_file,utils/hpc,dist,,HpcParser,y)
1004         cd $(SRC_DIST_DIR) && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x)
1005         cd $(SRC_DIST_DIR) && $(call sdist_file,utils/genprimopcode,dist,,Parser,y)
1006         cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk
1007         cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r
1008
1009 .PHONY: sdist
1010 sdist : sdist-prep
1011         "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1012
1013 sdist-manifest : $(SRC_DIST_TARBALL)
1014         tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1015
1016 # Upload the distribution(s)
1017 # Retrying is to work around buggy firewalls that corrupt large file transfers
1018 # over SSH.
1019 ifneq "$(PublishLocation)" ""
1020 publish-sdist :
1021         $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1022 endif
1023
1024 ifeq "$(BootingFromHc)" "YES"
1025 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1026 endif
1027
1028 # -----------------------------------------------------------------------------
1029 # Cleaning
1030
1031 .PHONY: clean
1032
1033 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1034 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1035 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1036 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1037 CLEAN_FILES += libraries/bootstrapping.conf
1038 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1039 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1040
1041 clean : clean_files clean_libraries
1042
1043 .PHONY: clean_files
1044 clean_files :
1045         "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1046
1047 ifneq "$(NO_CLEAN_GMP)" "YES"
1048 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1049 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1050
1051 clean : clean_gmp
1052 .PHONY: clean_gmp
1053 clean_gmp:
1054         "$(RM)" $(RM_OPTS) -r libraries/integer-gmp/gmp/objs
1055         "$(RM)" $(RM_OPTS) -r libraries/integer-gmp/gmp/gmpbuild
1056 endif
1057
1058 .PHONY: clean_libraries
1059 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1060 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1061
1062 clean_libraries:
1063         "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1064         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1065
1066 # We have to define a clean target for each library manually, because the
1067 # libraries/*/ghc.mk files are not included when we're cleaning.
1068 ifeq "$(CLEANING)" "YES"
1069 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1070   $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1071 endif
1072
1073 distclean : clean
1074         "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1075         "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1076         "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1077         "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1078         "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1079         "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1080         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1081         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1082         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1083         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1084         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1085
1086         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1087         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1088         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1089         "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1090
1091 maintainer-clean : distclean
1092         "$(RM)" $(RM_OPTS) configure mk/config.h.in
1093         "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
1094         "$(RM)" $(RM_OPTS) ghc.spec
1095         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1096                 $(PACKAGES) $(PACKAGES_STAGE2))
1097         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1098         "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1099                 $(PACKAGES) $(PACKAGES_STAGE2))
1100         "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1101         "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1102         "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1103         "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1104         "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1105
1106 .PHONY: all_libraries
1107
1108 .PHONY: bootstrapping-files
1109 bootstrapping-files: $(OTHER_LIBS)
1110 bootstrapping-files: includes/ghcautoconf.h
1111 bootstrapping-files: includes/DerivedConstants.h
1112 bootstrapping-files: includes/GHCConstants.h
1113
1114 .DELETE_ON_ERROR:
1115