4 ################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 ################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 ################################################################################
43 # Project-wide platform variables
45 ################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what (Windows only).
92 ################################################################################
96 # Set of options applicable to all fptools projects
98 ################################################################################
100 # build the libs first if we're bootstrapping from .hc files
101 ifeq "$(GhcWithHscBuiltViaC)" "YES"
102 AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
104 AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
108 # (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
109 # list is empty, then all projects present in the source tree will be built.
114 # set ProjectsDontInstall to a list of projects which are normally built but
117 ProjectsDontInstall = glafp-utils nofib
120 # Should the various project tests directories be built?
122 IncludeTestDirsInBuild=NO
124 ################################################################################
128 # Set of (configurable) options needed by the ghc tree
129 # plus their default options (if any).
131 ################################################################################
133 #---------------------------------------------------------------
135 # Variables that control how the compiler itself is built
137 #---------------------------------------------------------------
139 # The compiler used to build GHC is $(GHC). To change the actual compiler
140 # used, re-configure with --with-ghc=<path-to-ghc>.
142 # Extra ways in which to build the compiler (for example, you might want to
143 # build a profiled compiler so you can see where it spends its time)
146 # Extra option flags to pass to the compiler that compiles the compiler
147 # (Ones that are essential are wired into ghc/compiler/Makefile)
149 # -H25m allocate a bigger heap (might speed up compilation)
151 # -O compile an optimised compiler
153 # -DDEBUG include consistency/assertion checks in the compiled compiler
155 # -dcore-lint check the types after every pass of the compiler;
156 # a pretty strong internal check
157 GhcHcOpts=-O -Rghc-timing
159 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
160 GhcWithHscBuiltViaC=@BootingFromHc@
162 # Build a compiler that will build *unregisterised* libraries and
163 # binaries by default. Unregisterised code is supposed to compile and
164 # run without any support for architecture-specific assembly mangling,
165 # register assignment or tail-calls, and is therefore a good way to get
166 # started when porting GHC to new architectures.
168 # If this is set to NO, you can still use the unregisterised way
169 # (way 'u') to get unregisterised code, but the default way will be
172 # NOTE: this is not the same as building the compiler itself
173 # unregisterised. That's done by either (a) bootstrapping with a
174 # compiler that was built with GhcUnregisterized=YES, or (b)
175 # bootstrapping with a compiler that has way 'u' libraries, and the
176 # flag '-unreg' is added to GhcHcOpts above.
180 # Build a compiler with a native code generator backend
181 # (as well as a C backend)
183 # Target platforms supported:
184 # i386, alpha & sparc
185 ifneq "$(findstring $(HostArch_CPP), i386 alpha sparc)" ""
186 GhcWithNativeCodeGen=YES
188 GhcWithNativeCodeGen=NO
191 # Include GHCi in the compiler. Default to NO for the time being.
193 ifneq "$(findstring $(HostOS_CPP), linux solaris freebsd netbsd openbsd)" ""
194 GhcWithInterpreter=YES
196 GhcWithInterpreter=NO
200 # Building various ways?
201 # (right now, empty if not).
202 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
203 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
205 #------------------------------------------------------------------------------
206 # Options for GHC's Prelude
208 # What extra ways to build the libraries in
209 # In addition to the normal sequential way, the default is to also build
210 # profiled prelude libraries.
211 # When booting from .hc files, turn this off.
212 ifeq "$(GhcWithHscBuiltViaC)" "YES"
218 # Option flags to pass to GHC when it's compiling prelude modules
219 # *and* standard library modules (std) *and* modules in hslibs
220 # Typically these are things like -O or -dcore-lint
221 # The ones that are *essential* are wired into ghc/lib/Makefile
223 # -O is pretty desirable, otherwise no inlining of prelude
224 # things (incl "+") happens when compiling with this compiler
226 GhcLibHcOpts=-O -Rghc-timing
228 # Win32 only: Enable the RTS and libraries to be built as DLLs
229 # Don't split object files for libs if we're building DLLs
230 DLLized=@EnableWin32DLLs@
231 ifeq "$(DLLized)" "YES"
238 # Strip local symbols from libraries? This can make the libraries smaller,
239 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
243 # ----------------------------------------------------------------------------
244 # Options for GHC's RTS
246 # This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
247 # GhcRtsHcOpts is used when compiling .hc files and .c files.
248 # GhcRtsCcOpts is used when compiling .c files only.
250 # For a debugging RTS:
251 # GhcRtsHcOpts = -optc-DDEBUG
252 # GhcRtsCcOpts = -optc-g
254 # For an optimised RTS:
256 GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer
258 # Include the front panel code? Needs GTK+.
259 GhcRtsWithFrontPanel = NO
261 ################################################################################
265 ################################################################################
267 # Build HsLibs for which compiler?
269 # If $(HsLibsFor) == hugs or ghc, we assume we're building for the
270 # compiler/interpreter in the same source tree.
272 # HsLibsFor = ghc | hugs | nhc | hbc
275 # hslibs for GHC also uses the following variables (defined above):
276 # GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
278 # Haskell compiler options for tools in hslibs
281 # Build the Haskell Readline bindings?
283 GhcLibsWithReadline=@HaveReadlineHeaders@
285 # Libraries needed for linking with readline
286 LibsReadline=@LibsReadline@
288 # Include path to readline.h
289 # (no path == in standard include path)
293 # Build the Haskell OpenGL/GLUT binding?
295 GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
297 ################################################################################
301 # Happy specific options
303 ################################################################################
305 # The compiler you'd like to use to compile Happy
306 WithHappyHc = @WithHc@
308 # HappyHcOpts gives the flags to pass to the Haskell compiler used
309 # to compile the Happy sources with.
313 ################################################################################
317 # Haggis specific options
319 ################################################################################
321 ################################################################################
325 # Green-card specific options
327 ################################################################################
329 ################################################################################
333 # nofib specific options
335 ################################################################################
337 WithNofibHc = $(GHC_INPLACE)
339 # NoFibSubDirs controls which set of tests should be run
340 # You can run one or more of
348 NoFibSubDirs = imaginary spectral real
350 # The different ways to build nofib. Default is just to mirror
351 # what is done for the ghc prelude libraries.
353 NoFibWays = $(GhcLibWays)
355 # Haskell compiler options for nofib
358 # ==============================================================================
360 # END OF PROJECT-SPECIFIC STUFF
362 # Now come the generic configuration options
364 # ==============================================================================
366 ################################################################################
368 # Paths (see paths.mk)
370 ################################################################################
372 # Directory used by GHC (and possibly other tools) for storing
373 # temporary files. If your /tmp isn't big enough, either override
374 # this in build.mk or set your environment variable "TMPDIR" to point
375 # to somewhere with more space. (TMPDIR=. is a good choice).
377 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
378 # override an environment variable with the value of the make variable
379 # of the same name (if it exists) when executing sub-processes, so
380 # setting the TMPDIR env var would have no effect in the build tree.
382 DEFAULT_TMPDIR = /tmp
383 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
384 DEFAULT_TMPDIR = C:/TEMP
386 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
387 DEFAULT_TMPDIR = C:/TEMP
390 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
392 FPTOOLS_TOP_ABS = @hardtop@
393 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
394 FPTOOLS_TOP_ABS = $(patsubst /cygdrive/%/,%:/,@hardtop@)
396 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
397 FPTOOLS_TOP_ABS = $(patsubst /cygdrive/%/,%:/,@hardtop@)
401 # Installation directories, we don't use half of these,
402 # but since the configure script has them on offer while
403 # passing through, we might as well set them.
406 exec_prefix = @exec_prefix@
409 #sysconfdir = @datadir@
410 #sharedstatedir = @sharedstatedir@
411 #localstatedir = @localstatedir@
413 includedir = @includedir@
414 oldincludedir = @oldincludedir@
417 #UNUSED, see below: libexecdir = @libexecdir@
418 #UNUSED:infodir = @infodir@
419 #UNUSED:srcdir = @srcdir@
422 # Default values for most of the above are only set if
423 # they weren't configured to anything in particular
424 # via the configure script. (i.e., we make no assumption
425 # that the autoconf-generated script will assign defaults
426 # to all of the above).
428 ifeq "$(strip $(exec_prefix))" ""
429 exec_prefix = $(prefix)
431 ifeq "$(strip $(bindir))" ""
432 bindir = $(exec_prefix)/bin
436 # NOTE: by intention, libexecdir and libdir point to
438 # => Only way to override this is to set libexecdir= on the command line.
439 # (NOTE: configure script setting is ignored).
440 libexecdir = $(libdir)
442 ifeq "$(strip $(datadir))" ""
443 datadir = $(prefix)/share
445 ifeq "$(strip $(libdir))" ""
446 libdir = $(exec_prefix)/lib
448 ifeq "$(strip $(includedir))" ""
449 includedir = $(prefix)/include
451 ifeq "$(strip $(oldincludedir))" ""
452 oldincludedir = /usr/include
454 ifeq "$(strip $(mandir))" ""
455 mandir = $(prefix)/man
459 ################################################################################
461 # Utilities programs: flags
463 ################################################################################
465 # If you want to give any standard flags to pretty much any utility
466 # (see utils.mk for a complete list), by adding a line here
470 # where P is the utility. For example, to add -O to all Haskell
476 ################################################################################
478 # Utilities programs: where to find them
480 ################################################################################
482 #-----------------------------------------------------------------------------
483 # FPtools Utility locations
485 # By default, the various utils needed to be build ghc and chums
486 # is set up to point to the utils/ directory. Define here the
487 # path prefix for the utilities. Notice that it's a prefix with
488 # a trailing slash, so that it can be concatenated directly on
489 # front of a program name; if it's not set then we just look
490 # along the shell's $(PATH)
492 # If instead you want to use installed or your own versions of these,
493 # override the various *_PREFIX in build.mk, i.e., having the following
498 # will force `make' to rummage around in your PATH to find `mkdependC' (not
499 # sure it would need it in the first place, but still).
501 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
503 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
504 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
505 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
506 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
507 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
508 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
509 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
510 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
511 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
512 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
513 DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
515 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
517 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
518 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
520 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
521 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
522 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
523 HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
525 #-----------------------------------------------------------------------------
526 # Haskell compilers and mkdependHS
528 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
529 # compilers, if available.
531 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
532 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
534 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
535 # (because the version numbers have to be calculated).
538 GhcVersion = @GhcVersion@
539 GhcMajVersion = @GhcMajVersion@
540 GhcMinVersion = @GhcMinVersion@
541 GhcPatchLevel = @GhcPatchLevel@
549 # Sometimes we want to invoke ghc from the build tree in different
550 # projects (eg. it's handy to have a nofib & a ghc build in the same
551 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
553 GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
555 #-----------------------------------------------------------------------------
561 WhatGccIsCalled = @WhatGccIsCalled@
562 ifeq "$(strip $(HaveGcc))" "YES"
563 ifneq "$(strip $(UseGcc))" "YES"
566 CC = $(WhatGccIsCalled)
570 #-----------------------------------------------------------------------------
571 # GMP Library (version 2.0.x or above)
573 HaveLibGmp = @HaveLibGmp@
576 #-----------------------------------------------------------------------------
578 # (if present in libc use that one, otherwise use the one in the tree)
580 HaveRegex = @HaveRegex@
582 #-----------------------------------------------------------------------------
585 GTK_CONFIG = @GTK_CONFIG@
586 GTK_VERSION = @GTK_VERSION@
588 #-----------------------------------------------------------------------------
592 # Don't bother with -lfl, we define our own yywrap()s anyway.
594 #WAS:FLEX_LIB = @LEXLIB@
596 #-----------------------------------------------------------------------------
597 # Other standard (ha!) Unix utilities
600 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
601 BASH = /usr/local/bin/bash
603 # Could be either gzip or compress
605 COMPRESS = @CompressCmd@
606 COMPRESS_SUFFIX = @CompressSuffix@
608 CONTEXT_DIFF = @ContextDiffCmd@
612 RAWCPP = $(CPP) -undef -traditional
616 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
617 # install-sh script (if chosen). This not terribly useful to us, so we convert
618 # it into an abs. path.
620 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
631 PREPROCESSCMD = $(CC) -E
638 # In emergency situations, REAL_SHELL is used to perform shell commands
639 # from within the ghc driver script, by scribbling the command line to
640 # a temp file and then having $(REAL_SHELL) execute it.
642 # The reason for having to do this is that overly long command lines
643 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
644 # 2.5.1), which is why this backdoor is provided. The situation of overly
645 # long command lines is either encountered while doing `make boot' in ghc/compiler,
646 # or when linking the compiler binary (`hsc').
648 # We do not use SHELL to execute long commands, as `make' will more than likely
649 # override whatever setting you have in your environment while executing.
651 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
652 # as it is SHELL that will show up the bogosity in the first place, but setting
653 # it to anything else isn't really portable.
655 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
656 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
666 # Under Windows, we have to deal with .exe suffixes
671 # This is special to literate/, ToDo: add literate-specific
672 # configure setup to literate/.
677 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
685 #-----------------------------------------------------------------------------
690 SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
691 SGML2HTML = $(DOCBOOK_PREFIX)db2html
692 SGML2PS = $(DOCBOOK_PREFIX)db2ps
693 SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
694 SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
696 SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
698 SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
699 SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
700 SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
701 SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
703 DOCBOOK_CATALOG = @Catalog@
705 #-----------------------------------------------------------------------------
706 # FPtools support software
708 # Stuff from fptools/glafp-utils
709 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
710 LTX = $(LTX_PREFIX)ltx
711 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
712 LNDIR = $(LNDIR_PREFIX)lndir
713 MSUB = $(MSUB_PREFIX)msub
714 ETAGS = $(ETAGS_PREFIX)etags
715 VERBATIM = $(VERBATIM_PREFIX)verbatim
716 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
717 RUNTEST = $(RUNTEST_PREFIX)runstdtest
719 GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
727 HAPPY_VERSION = @HappyVersion@
729 # Options to pass to Happy when we're going to compile the output with GHC
731 GHC_HAPPY_OPTS = $(shell if expr $(HAPPY_VERSION) \< "1.8" >/dev/null; then echo -g; else echo -agc; fi)
734 # Stuff from fptools/literate
736 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
737 LIT2HTML = $(LITERATE_PREFIX)lit2html
738 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
739 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
740 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
741 LIT2TEXT = $(LITERATE_PREFIX)lit2text
744 # Stuff from fptools/ghc/utils
746 UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
747 HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
748 HSTAGS = $(HSTAGS_PREFIX)hstags
749 HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
752 # Options for the compiling different `ways'. Various projects within
753 # the glorious fptools tree support building in various user-configured
754 # ways. For instance, you could set up one `way' such that the prelude
755 # libraries all were built with the option -ffoldr-build-on.
757 # To configure up your own way, have a look at some of the standard ways
758 # such as profiling, and create your own set of WAY_*_OPTS defs below.
759 # After having done that, add your way string to WAYS, and after having
760 # run the configure script, the different projects will add the new way
761 # to the list of ways they support.
765 # IMPORTANT! The WAYS variable configures the different `ways'
766 # you want to build a project (or maybe just parts of it, as is
767 # the case for ghc/). This variable is intended set inside the
768 # project mk setup, enforcing a global fptools WAYS is a bit too
769 # much (do you *really* want to build glafp-utils the profiled-concurrent
774 # Definitions of the different ways:
778 # - description, e.g., profiling
779 # * what they mean to the driver:
780 # - WAY_p_HC_OPTS gives the list of command-line options
785 # The ways currently defined.
787 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
788 USER_WAYS=a b c d e f g h i j k l m n o A B
791 # The following ways currently have treated specially, p u t mg,
792 # as the driver script treats these guys specially and needs to carefully be told
793 # about the options for these. Hence, we hide the required command line options
794 # for these in the ghc/driver, as this is the only place they are needed.
796 # If you want to add to these default options, fill in the variables below:
803 WAY_t_NAME=ticky-ticky profiling
804 WAY_t_HC_OPTS= -ticky
807 WAY_u_NAME=unregisterized (using portable C only)
811 WAY_s_NAME=threads (for SMP)
816 WAY_mp_HC_OPTS=-parallel
820 WAY_mg_HC_OPTS=-gransim
823 # Add user-way configurations here: