1 #################################################################################
5 # Standard targets for fptools
7 #################################################################################
10 # This file contain three groups of target rules:
16 # 2. GNU standard targets
18 # install* uninstall installcheck installdirs
19 # clean* distclean* mostlyclean* maintainer-clean*
25 # 3. Some of the above targets have a version that
26 # recursively invokes that target in sub-directories.
27 # This relies on the importing Makefile setting SUBDIRS
29 # The recursive targets are marked with a * above
37 ##################################################################
38 # FPtools standard targets
42 # The depend target has to cope with a set of files that may have
43 # different ways of computing their dependencies, i.e., a Haskell
44 # module's dependencies are computed differently from C files.
46 # Note that we don't compute dependencies automatically, i.e., have the
47 # .depend file be a target that is dependent on the Haskell+C sources,
48 # and then have the `depend' target depend on `.depend'. The reason for
49 # this is that when GNU make is processing the `include .depend' statement
50 # it records .depend as being a Makefile. Before doing any other processing,
51 # `make' will try to check to see if the Makefiles are up-to-date. And,
52 # surprisingly enough, .depend has a rule for it, so if any of the source
53 # files change, it will be invoked, *regardless* of what target you're making.
55 # So, for now, the dependencies has to be re-computed manually via `make depend'
56 # whenever a module changes its set of imports. Doing what was outlined above
57 # is only a small optimisation anyway, it would avoid the recomputation of
58 # dependencies if the .depend file was newer than any of the source modules.
62 depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
65 ifneq "$(DOC_SRCS)" ""
66 $(MKDEPENDLIT) -o .depend $(MKDEPENDLIT_OPTS) $(filter %.lit,$(DOC_SRCS))
68 ifneq "$(MKDEPENDC_SRCS)" ""
69 $(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
71 ifneq "$(MKDEPENDHS_SRCS)" ""
72 @if echo $(notdir $(MKDEPENDHS)) | grep -s ghc ; then \
73 echo $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
74 $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
76 echo $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
77 $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
81 # The above decides whether to invoke the computation of dependencies
82 # the ghc-0.xx or the ghc-2.x way by looking for "ghc" in the name of
83 # of the `make depend' script. Not bulletproof this.
86 ##################################################################
89 # The boot target, at a minimum generates dependency information
95 ##################################################################
96 # GNU Standard targets
98 # Every Makefile should define the following targets
101 # Compile the entire program. This should be the default target.
102 # This target need not rebuild any documentation files; Info files
103 # should normally be included in the distribution, and DVI files
104 # should be made only when explicitly asked for.
107 # Compile the program and copy the executables, libraries, and so on
108 # to the file names where they should reside for actual use. If
109 # there is a simple test to verify that a program is properly
110 # installed, this target should run that test.
112 # The commands should create all the directories in which files are
113 # to be installed, if they don't already exist. This includes the
114 # directories specified as the values of the variables prefix and
115 # exec_prefix , as well as all subdirectories that are needed. One
116 # way to do this is by means of an installdirs target as described
119 # Use `-' before any command for installing a man page, so that make
120 # will ignore any errors. This is in case there are systems that
121 # don't have the Unix man page documentation system installed.
123 # The way to install Info files is to copy them into `$(infodir)'
124 # with $(INSTALL_DATA) (see Command Variables), and then run the
125 # install-info program if it is present. install-info is a script
126 # that edits the Info `dir' file to add or update the menu entry for
127 # the given Info file; it will be part of the Texinfo package. Here
128 # is a sample rule to install an Info file:
130 # $(infodir)/foo.info: foo.info # There may be a newer info
131 # file in . than in srcdir.
132 # -if test -f foo.info; then d=.; \
133 # else d=$(srcdir); fi; \ $(INSTALL_DATA)
134 # $$d/foo.info $@; \ # Run install-info only if it
135 # exists. # Use `if' instead of just prepending `-' to the
136 # # line so we notice real errors from install-info. # We
137 # use `$(SHELL) -c' because some shells do not # fail
138 # gracefully when there is an unknown command.
139 # if $(SHELL) -c 'install-info --version' \
140 # >/dev/null 2>&1; then \ install-info
141 # --infodir=$(infodir) $$d/foo.info; \ else true;
145 # Delete all the installed files that the `install' target would
146 # create (but not the noninstalled files such as `make all' would
151 # Delete all files from the current directory that are normally
152 # created by building the program. Don't delete the files that
153 # record the configuration. Also preserve files that could be made
154 # by building, but normally aren't because the distribution comes
157 # Delete `.dvi' files here if they are not part of the
161 # Delete all files from the current directory that are created by
162 # configuring or building the program. If you have unpacked the
163 # source and built the program without creating any other files,
164 # `make distclean' should leave only the files that were in the
168 # Like `clean', but may refrain from deleting a few files that
169 # people normally don't want to recompile. For example, the
170 # `mostlyclean' target for GCC does not delete `libgcc.a', because
171 # recompiling it is rarely necessary and takes a lot of time.
174 # Delete everything from the current directory that can be
175 # reconstructed with this Makefile. This typically includes
176 # everything deleted by distclean , plus more: C source files
177 # produced by Bison, tags tables, Info files, and so on.
179 # One exception, however: `make maintainer-clean' should not delete
180 # `configure' even if `configure' can be remade using a rule in the
181 # Makefile. More generally, `make maintainer-clean' should not delete
182 # anything that needs to exist in order to run `configure' and then
183 # begin to build the program.
186 # Update a tags table for this program.
189 # Generate any Info files needed. The best way to write the rules is
194 # foo.info: foo.texi chap1.texi chap2.texi
195 # $(MAKEINFO) $(srcdir)/foo.texi
197 # You must define the variable MAKEINFO in the Makefile. It should
198 # run the makeinfo program, which is part of the Texinfo
202 # Generate DVI files for all TeXinfo documentation. For example:
206 # foo.dvi: foo.texi chap1.texi chap2.texi
207 # $(TEXI2DVI) $(srcdir)/foo.texi
209 # You must define the variable TEXI2DVI in the Makefile. It should
210 # run the program texi2dvi , which is part of the Texinfo
211 # distribution. Alternatively, write just the dependencies, and
212 # allow GNU Make to provide the command.
214 # ps is a FPtools addition for Postscript files
216 # `dist' `binary-dist'
217 # Create a distribution tar file for this program. The tar file
218 # should be set up so that the file names in the tar file start with
219 # a subdirectory name which is the name of the package it is a
220 # distribution for. This name can include the version number.
222 # For example, the distribution tar file of GCC version 1.40 unpacks
223 # into a subdirectory named `gcc-1.40'.
225 # The easiest way to do this is to create a subdirectory
226 # appropriately named, use ln or cp to install the proper files in
227 # it, and then tar that subdirectory.
229 # The dist target should explicitly depend on all non-source files
230 # that are in the distribution, to make sure they are up to date in
231 # the distribution. See Making Releases.
233 # binary-dist is an FPtools addition for binary distributions
236 # Perform self-tests (if any). The user must build the program
237 # before running the tests, but need not install the program; you
238 # should write the self-tests so that they work when the program is
239 # built but not installed.
241 # The following targets are suggested as conventional names, for programs
242 # in which they are useful.
245 # Perform installation tests (if any). The user must build and
246 # install the program before running the tests. You should not
247 # assume that `$(bindir)' is in the search path.
250 # It's useful to add a target named `installdirs' to create the
251 # directories where files are installed, and their parent
252 # directories. There is a script called `mkinstalldirs' which is
253 # convenient for this; find it in the Texinfo package.
254 # (FPTOOLS: we use a close relative of the suggested script, situated
255 # in glafp-utils/mkdirhier -- SOF)
260 ###########################################
264 ###########################################
266 # For each of these variables that is defined
267 # we generate one "all" rule and one rule for the variable itself:
269 # HS_PROG Haskell program
272 # SCRIPT_PROG Script (e.g. Perl script)
274 # For details of exactly what rule is generated, see the
275 # relevant section below
279 #----------------------------------------
282 ifneq "$(HS_PROG)" ""
285 $(HS_PROG) :: $(HS_OBJS)
286 $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
289 #----------------------------------------
295 $(C_PROG) :: $(C_OBJS)
296 $(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
300 #----------------------------------------
303 ifneq "$(LIBRARY)" ""
309 $(AR) $(AR_OPTS) $@ $(LIBOBJS)
314 # For Haskell object files, we might have chosen to split
315 # up the object files. Test for whether the library being
316 # built is consisting of Haskell files by (hackily) checking
317 # whether HS_SRCS is empty or not.
320 ifneq "$(HS_SRCS)" ""
321 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
324 TMPDIR=$(TMPDIR); export TMPDIR; find $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print | xargs ar q $@
330 $(LIBRARY) :: $(LIBOBJS)
334 #----------------------------------------
337 ifneq "$(SCRIPT_PROG)" ""
339 # To produce a fully functional script, you may
340 # have to add some configuration variables at the top of
341 # the script, i.e., the compiler driver needs to know
342 # the path to various utils in the build tree for instance.
344 # To have the build rule for the script automatically do this
345 # for you, set the variable SCRIPT_SUBST_VARS to the list of
346 # variables you need to put in.
349 # SCRIPT_SUBST creates a string of echo commands that
350 # will when evaluated append the (perl)variable name and its value
351 # to the target it is used for, i.e.,
355 # SCRIPT_SUBST_VARS = A B
356 # SCRIPT_SUBST=echo "$""A=\"foo\";" >> $@; echo "$""B=\"bar\";" >> $@
358 # so if you have a rule like the following
363 # @eval $(SCRIPT_SUBST)
365 # `make foo' would create a file `foo' containing the following
372 # ToDo: make this work for shell scripts (drop the initial $).
374 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$$\"\"$(val)=\\\"$($(val))\\\";\" >> $@;")
376 all :: $(SCRIPT_PROG)
379 # #! support under cygwin32 is not quite there yet,
380 # so we rely on the eval `trick' instead. On all other
381 # platforms, we prepend #!$(INTERP) -- SOF 6/97
384 $(SCRIPT_PROG) :: $(SCRIPT_OBJS)
387 ifeq "$(INTERP)" "perl"
388 ifneq "$(BIN_DIST)" "1"
389 @if test $(HOSTPLATFORM) = "i386-unknown-cygwin32" ; then \
390 echo "#! /bin/sh -- # to stop perl from looping " > $@ ; \
391 echo "eval 'exec perl -S $$$""0 $$""{1+\"$$$""@\"}'" >> $@ ; \
392 echo " if $$""running_under_some_shell;" >> $@ ; \
394 echo "#! "$(PERL) > $@ ; \
401 @echo "#!"$(INTERP) > $@
406 ifneq "$(SCRIPT_PREFIX_FILES)" ""
407 @cat $(SCRIPT_PREFIX_FILES) >> $@
409 @eval $(SCRIPT_SUBST)
410 @cat $(SCRIPT_OBJS) >> $@
416 ###########################################
418 # Targets: install install-strip uninstall
420 ###########################################
422 # For each of these variables that is defined, you
423 # get one install rule
425 # INSTALL_PROGS install these executable programs in $(bindir)
426 # INSTALL_SCRIPTS install these executable scripts in $(bindir)
427 # INSTALL_LIBS install these platform-dependent libraries in $(libdir)
428 # INSTALL_LIBEXECS install these platform-dependent execs in $(libdir)
429 # INSTALL_DATAS install these platform-independent files in $(datadir)
431 # If the installation directory variable is undefined, the install rule simply
432 # emits a suitable error message.
434 # Remember, too, that the installation directory variables ($(bindir) and
435 # friends can be overridden from their original settings in mk/config.mk.in
438 .PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
441 @echo "bindir = $(bindir)"
442 @echo "libdir = $(libdir)"
443 @echo "libexecdir = $(libexecdir) # by default, same as libdir"
444 @echo "datadir = $(datadir) # unused for ghc project"
447 # Sometimes useful to separate out the creation of install directories
448 # from the installation itself.
451 @$(INSTALL_DIR) $(bindir)
452 @$(INSTALL_DIR) $(libdir)
453 @$(INSTALL_DIR) $(libexecdir)
454 @$(INSTALL_DIR) $(datadir)
456 # Better do this first...
457 # but we won't for the moment, do it on-demand from
458 # within the various install targets instead.
459 #install:: install-dirs
461 ifneq "$(INSTALL_PROGS)" ""
462 install:: $(INSTALL_PROGS)
463 @$(INSTALL_DIR) $(bindir)
464 for i in $(INSTALL_PROGS); do \
465 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(bindir); \
470 # Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
471 # install without stripping.
473 ifneq "$(INSTALL_SCRIPTS)" ""
474 install:: $(INSTALL_SCRIPTS)
475 @$(INSTALL_DIR) $(bindir)
476 ifeq "$(INTERP)" "perl"
477 ifneq "$(BIN_DIST)" "1"
478 @for i in $(INSTALL_SCRIPTS); do \
480 if test $(HOSTPLATFORM) = "i386-unknown-cygwin32" ; then \
481 echo "#! /bin/sh -- # to stop perl from looping " > $$i.tmp ; \
482 echo "eval 'exec perl -S $$$""0 $$""{1+\"$$$""@\"}'" >> $$i.tmp ; \
483 echo " if $$""running_under_some_shell;" >> $$i.tmp ; \
485 echo "#! $(PERL)" > $$i.tmp ; \
487 echo $$"bindir='$(bindir)';" >> $$i.tmp ; \
488 echo $$"libdir='$(libdir)';" >> $$i.tmp ; \
489 echo $$"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
490 echo $$"datadir='$(datadir)';" >> $$i.tmp ; \
491 cat $$i >> $$i.tmp ; \
492 echo $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_OPTS)) $$i.tmp $(bindir)/$$i ; \
493 $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_BIN_OPTS)) $$i.tmp $(bindir)/$$i ; \
497 for i in $(INSTALL_SCRIPTS); do \
498 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
502 for i in $(INSTALL_SCRIPTS); do \
503 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
508 ifneq "$(INSTALL_LIB_SCRIPTS)" ""
509 install:: $(INSTALL_LIB_SCRIPTS)
510 @$(INSTALL_DIR) $(libdir)
511 ifeq "$(INTERP)" "perl"
512 ifneq "$(BIN_DIST)" "1"
513 @for i in $(INSTALL_LIB_SCRIPTS); do \
515 if test $(HOSTPLATFORM) = "i386-unknown-cygwin32" ; then \
516 echo "#! /bin/sh -- # to stop perl from looping " > $$i.tmp ; \
517 echo "eval 'exec perl -S $$$""0 $$""{1+\"$$$""@\"}'" >> $$i.tmp ; \
518 echo " if $$""running_under_some_shell;" >> $$i.tmp ; \
520 echo "#! $(PERL)" > $$i.tmp ; \
522 echo $$"bindir='$(bindir)';" >> $$i.tmp ; \
523 echo $$"libdir='$(libdir)';" >> $$i.tmp ; \
524 echo $$"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
525 echo $$"datadir='$(datadir)';" >> $$i.tmp ; \
526 cat $$i >> $$i.tmp ; \
527 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir) ; \
528 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libdir)/$$i ; \
532 for i in $(INSTALL_LIB_SCRIPTS); do \
533 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
537 for i in $(INSTALL_LIB_SCRIPTS); do \
538 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
543 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
544 install:: $(INSTALL_LIBEXEC_SCRIPTS)
545 @$(INSTALL_DIR) $(libexecdir)
546 ifeq "$(INTERP)" "perl"
547 ifneq "$(BIN_DIST)" "1"
548 @for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
550 if test $(HOSTPLATFORM) = "i386-unknown-cygwin32" ; then \
551 echo "#! /bin/sh -- # to stop perl from looping " > $$i.tmp ; \
552 echo "eval 'exec perl -S $$$""0 $$""{1+\"$$$""@\"}'" >> $$i.tmp ; \
553 echo " if $$""running_under_some_shell;" >> $$i.tmp ; \
555 echo "#! $(PERL)" > $$i.tmp ; \
557 echo $$"bindir='$(bindir)';" >> $$i.tmp ; \
558 echo $$"libdir='$(libdir)';" >> $$i.tmp ; \
559 echo $$"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
560 echo $$"datadir='$(datadir)';" >> $$i.tmp ; \
561 cat $$i >> $$i.tmp ; \
562 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir) ; \
563 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libexecdir)/$$i ; \
567 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
568 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
572 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
573 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
578 ifneq "$(INSTALL_LIBS)" ""
579 install:: $(INSTALL_LIBS)
580 @$(INSTALL_DIR) $(libdir)
581 for i in $(INSTALL_LIBS); do \
582 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
586 ifneq "$(INSTALL_LIBEXECS)" ""
587 install:: $(INSTALL_LIBEXECS)
588 @$(INSTALL_DIR) $(libexecdir)
589 -for i in $(INSTALL_LIBEXECS); do \
590 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(libexecdir); \
594 ifneq "$(INSTALL_DATAS)" ""
595 install:: $(INSTALL_DATAS)
596 @$(INSTALL_DIR) $(datadir)
597 for i in $(INSTALL_DATAS); do \
598 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
606 ifeq ($(INSTALL_PROGS),)
607 @for i in $(INSTALL_PROGS) ; do \
608 echo rm -f $(bindir)/`basename $$i`; \
609 rm -f $(bindir)/`basename $$i`; \
612 ifeq ($(INSTALL_LIBS),)
613 @for i in $(INSTALL_LIBS); do \
614 echo rm -f $(libdir)/`basename $$i`; \
615 rm -f $(libdir)/`basename $$i`; \
618 ifeq ($(INSTALL_LIBEXECS),)
619 @for i in $(INSTALL_LIBEXECS); do \
620 echo rm -f $(libexecdir)/`basename $$i`; \
621 rm -f $(libexecdir)/`basename $$i`; \
624 ifeq ($(INSTALL_DATAS),)
625 @for i in $(INSTALL_DATAS); do \
626 echo rm -f $(datadir)/`basename $$i`; \
627 rm -f $(datadir)/`basename $$i`; \
632 # install-strip is from the GNU Makefile standard.
636 @$(MAKE) EXTRA_INSTALL_OPTS='-s' install
639 ###########################################
641 # Targets: dist binary-dist
643 ###########################################
647 # dist-pre is a canned rule the toplevel of your source tree
648 # would use as follows,
652 # it performs two tasks, first creating the distribution directory
653 # tree and it then decorates the new tree with symbolic links pointing
654 # to the symbolic links in the build tree.
656 # The dist-pre relies on (at least) the `find' in GNU findutils
657 # (only tested with version 4.1). All non-GNU `find's I have
658 # laid on my hands locally, has a restrictive treatment of {} in
659 # -exec commands, i.e.,
661 # find . -print echo a{} \;
663 # does not expand the {}, it has to be a separate argument (i.e. `a {}').
664 # GNU find is (IMHO) more sensible here, expanding any {} it comes across
665 # inside an -exec, whether it is a separate arg or part of a word:
669 # GNU find version 4.1
670 # $ find yes -exec echo oh,{}! \;
673 # Of course, the above is not impossible to achieve with other finds,
674 # just that GNU find does the Patently Right Thing here :)
676 # ====> if you're using these dist rules, get hold of GNU findutils.
680 .PHONY: dist dist-pre dist-post
683 # The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
684 # directories when creating shadow source distrib tree
687 -rm -rf $(SRC_DIST_DIR)
688 -rm -f $(SRC_DIST_NAME).tar.gz
689 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
690 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
693 # After having created a shadow distribution tree and copied/linked
694 # all the necessary files to it, `dist-post' makes sure the permissions
695 # are set right and then package up the tree. Empty directories are also removed.
697 # For now, we make the packaging a separate rule, so as to allow
698 # the inspection of the dist tree before eventually packaging it up.
701 @echo Deleting the following empty directories..
702 ( cd $(SRC_DIST_DIR) ; cd .. ; find $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
703 ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
706 cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
711 # The default dist rule:
713 # copy/link the contents of $(SRC_DIST_FILES) into the
714 # shadow distribution tree. SRC_DIST_FILES contain the
715 # build-generated files that you want to include in
716 # a source distribution.
719 ifneq "$(SRC_DIST_FILES)" ""
721 @for i in $(SRC_DIST_FILES); do \
722 if (test -f "$$i"); then \
723 echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
724 $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
730 # binary-dist creates a binary bundle, set BIN_DIST_NAME
731 # to package name and do `make binary-dist' (normally this
732 # just a thing you would do from the toplevel of fptools or)
733 # from the top of a project.
735 .PHONY: binary-dist-pre binary-dist binary-pack
738 -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
739 -rm -f $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
740 @for i in $(BIN_DIST_DIRS); do \
741 if (test -d "$$i"); then \
742 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
743 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
744 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
745 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
746 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion); \
747 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion); \
748 echo $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
749 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
750 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
751 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
752 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
753 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
754 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion) ; \
755 $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
756 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
757 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
758 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
759 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
760 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
761 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion) ; \
766 # Do this separately for now
769 ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME); rm -rf $(BIN_DIST_NAME) )
773 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
774 gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
779 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec rm -f {} \; )
782 ###########################################
784 # Targets: check tags show info
786 ###########################################
788 #------------------------------------------------------------
794 @for i in $(filter-out %.lhs .hs, $(TESTS)) ''; do \
795 if (test -f "$$i"); then \
796 echo Running: `basename $$i` ; \
797 cd test; `basename $$i` ; \
801 #------------------------------------------------------------
809 ifneq "$(HS_SRCS)" ""
810 $(HSTAGS) $(HSTAGS_OPTS) -- $(HS_SRCS)
816 #------------------------------------------------------------
818 # to see the effective value used for a Makefile variable, do
819 # make show VALUE=MY_VALUE
823 @echo '$(VALUE)=$($(VALUE))'
825 #------------------------------------------------------------
828 .PHONY: dvi ps html info txt
838 # Building literate root documents requires extra treatment,
839 # as the root files need to be processed different from other
840 # literate files (`compile' them into .itex with the -S (standalone)
841 # option) and then link together a master TeX document with
844 $(filter %.tex,$(patsubst %.lit,%.tex,$(DOC_SRCS))) :
846 $(LIT2LATEX) -S -c $(LIT2LATEX_OPTS) -o $(patsubst %.tex,%.itex,$@) $(addsuffix .lit,$(basename $@))
847 $(LIT2LATEX) -S $(LIT2LATEX_OPTS) -o $@ $(addsuffix .itex,$(basename $@))
850 # Ditto for texi and html
852 $(filter %.texi,$(patsubst %.lit,%.texi,$(DOC_SRCS))) :
854 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.texi,%.itxi,$@) $(addsuffix .lit,$(basename $@))
855 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $@ $(addsuffix .itxi,$(basename $@))
858 # Rather than using lit2html, we opt for the lit-texi-html route,
859 # and use texi2html as our HTML backend.
860 # (Note: we need to change mkdependlit to get this really off the ground)
862 # If the generated html representation is split up into a myriad of files,
863 # put the files in a subdirectory html/, if a monolith is created, park
864 # the generated file in the same dir as the .lit file.
866 $(filter %.html,$(patsubst %.lit,%.html,$(DOC_SRCS))) : $(filter %.lit,$(DOC_SRCS))
867 $(RM) $@ $(patsubst %.html,%.texi,$@) $(patsubst %.html,%.itxi,$@)
868 ifneq "$(filter -monolithic,$(TEXI2HTML_OPTS))" ""
869 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
870 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
871 $(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@)
872 cp $(TEXI2HTML_PREFIX)invisible.xbm .
874 $(RM) html/$(basename $@)*
876 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
877 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o html/$(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
878 (cd html; ../$(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@); cd ..)
879 cp $(TEXI2HTML_PREFIX)invisible.xbm html/
882 ###########################################
886 ###########################################
888 .PHONY: realclean mostlyclean clean distclean maintainer-clean
890 # realclean is just a synonym for maintainer-clean
891 realclean: maintainer-clean
894 ifneq "$(MOSTLY_CLEAN_FILES)" ""
896 rm -f $(MOSTLY_CLEAN_FILES)
899 ifneq "$(CLEAN_FILES)" ""
905 ifneq "$(DIST_CLEAN_FILES)" ""
906 distclean:: mostlyclean clean
907 rm -f $(DIST_CLEAN_FILES)
911 ifneq "$(MAINTAINER_CLEAN_FILES)" ""
912 maintainer-clean:: mostlyclean clean distclean
913 @echo 'This command is intended for maintainers to use; it'
914 @echo 'deletes files that may need special tools to rebuild.'
915 rm -f $(MAINTAINER_CLEAN_FILES)
919 # If (Haskell) object files are split, cleaning up
920 # consist of descending into the directories where
921 # the myriads of object files have been put.
924 ifneq "$(HS_OBJS)" ""
925 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
927 find $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food;
932 #################################################################################
936 #################################################################################
938 # Here is the ingenious jiggery pokery that allows you to build multiple versions
939 # of a program in a single build tree.
941 # The ways setup requires the following variables to be set:
943 # Expects: $(WAYS) the possible "way" strings to one of
944 # which $(way) will be set
947 # So how does $(way) ever get set to anything? Answer, we recursively
948 # invoke make, setting $(way) on the command line.
949 # When do we do this recursion? Answer: whenever the programmer
950 # asks make to make a target that involves a way suffix.
951 # We must remember *not* to recurse again; but that's easy: we
952 # just see if $(way) is set:
956 # If $(WAYS) = p mc, then WAY_TARGETS expands to
957 # %.p_lhs %.p_hs %.p_o ... %.mc_lhs %.p_hs ...
958 # and OTHER_WAY_TARGETS to
959 # %_p.a %_p %_mc.a %_mc
960 # where the suffixes are from $(SUFFIXES)
962 # We have to treat libraries and "other" targets differently,
963 # because their names are of the form
964 # libHS_p.a and Foo_p
965 # whereas everything else has names of the form
968 FPTOOLS_SUFFIXES := o hi hc
970 WAY_TARGETS = $(foreach way,$(WAYS),$(foreach suffix, $(FPTOOLS_SUFFIXES), %.$(way)_$(suffix)))
971 LIB_WAY_TARGETS = $(foreach way,$(WAYS),%_$(way).a %_$(way))
973 # $@ will be something like Foo.p_o
974 # $(suffix $@) returns .p_o
975 # $(subst .,.p_o) returns p_o
976 # $(subst _,.,p_o) returns p.o (clever)
977 # $(basename p.o) returns p
980 $(MAKE) way=$(basename $(subst _,.,$(subst .,,$(suffix $@)))) $@
982 # $(@F) will be something like libHS_p.a, or Foo_p
983 # $(basename $(@F)) will be libHS_p, or Foo_p
984 # The sed script extracts the "p" part.
987 $(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
992 ##################################################################
996 ##################################################################
998 # Here are the diabolically clever rules that
1000 # (a) for each "recursive target" <t>
1001 # propagates "make <t>" to directories in SUBDIRS
1003 # (b) when SUBDIRS is empty,
1004 # for each "multi-way-target" <t>
1005 # calls "make -way=w <t>" for each w in $(WAYS)
1007 # This has the effect of making the standard target
1008 # in each of the specified ways (as well as in the normal way
1010 # Controlling variables
1011 # WAYS = extra (beyond the normal way) ways to build things in
1012 # SUBDIRS = subdirectories to recurse into
1014 # No ways, so iterate over the SUBDIRS
1017 ifneq "$(SUBDIRS)" ""
1019 all docs runtests boot TAGS clean veryclean maintainer-clean install info ::
1020 @case '${MFLAGS}' in *[ik]*) set +e;; esac;
1021 @echo "------------------------------------------------------------------------"
1022 @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
1023 @echo "PWD = $(shell pwd)"
1024 @echo "------------------------------------------------------------------------"
1025 @for i in $(SUBDIRS) ; do \
1026 echo "------------------------------------------------------------------------"; \
1027 echo "==fptools== $(MAKE) $@;"; \
1028 echo " in $(shell pwd)/$$i"; \
1029 echo "------------------------------------------------------------------------"; \
1030 $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
1032 @echo "------------------------------------------------------------------------"
1033 @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
1034 @echo "PWD = $(shell pwd)"
1035 @echo "------------------------------------------------------------------------"
1038 @case '${MFLAGS}' in *[ik]*) set +e;; esac; \
1039 for i in $(SUBDIRS) ; do \
1040 $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
1041 $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
1047 # Selectively building subdirectories.
1050 ifneq "$(SUBDIRS)" ""
1052 $(MAKE) -C $@ $(MFLAGS)
1058 # NB: the targets exclude
1060 # since these are way-independent
1061 all docs runtests TAGS clean veryclean maintainer-clean install ::
1062 @echo "------------------------------------------------------------------------"
1063 @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
1064 @echo "PWD = $(shell pwd)"
1065 @echo "------------------------------------------------------------------------"
1066 @for i in $(WAYS) ; do \
1067 echo "------------------------------------------------------------------------"; \
1068 echo "==fptools== $(MAKE) way=$$i $@;"; \
1069 echo "PWD = $(shell pwd)"; \
1070 echo "------------------------------------------------------------------------"; \
1071 $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
1073 @echo "------------------------------------------------------------------------"
1074 @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
1075 @echo "PWD = $(shell pwd)"
1076 @echo "------------------------------------------------------------------------"