##################################################################
+#
+# Recursive stuff
+#
+# At the top of the file so that recursive makes happen before
+# makes in the main directory. This is needed for some targets,
+# e.g. when building DLLs in hslibs.
+#
+##################################################################
+
+# Here are the diabolically clever rules that
+#
+# (a) for each "recursive target" <t>
+# propagates "make <t>" to directories in SUBDIRS
+#
+# (b) when SUBDIRS is empty,
+# for each "multi-way-target" <t>
+# calls "make -way=w <t>" for each w in $(WAYS)
+#
+# This has the effect of making the standard target
+# in each of the specified ways (as well as in the normal way
+
+# Controlling variables
+# WAYS = extra (beyond the normal way) ways to build things in
+# SUBDIRS = subdirectories to recurse into
+
+# No ways, so iterate over the SUBDIRS
+
+# note about recursively invoking make: we'd like make to drop all the
+# way back to the top level if it fails in any of the
+# sub(sub-...)directories. This is done by setting the -e flag to the
+# shell during the loop, which causes an immediate failure if any of
+# the shell commands fail.
+
+# One exception: if the user gave the -i or -k flag to make in the
+# first place, we'd like to reverse this behaviour. So we check for
+# these flags, and set the -e flag appropriately. NOTE: watch out for
+# the --no-print-directory flag which is passed to recursive
+# invocations of make.
+#
+# NOTE: Truly weird use of exit below to stop the for loop dead in
+# its tracks should any of the sub-makes fail. By my reckoning,
+# "cmd || exit $?" should be equivalent to "cmd"
+
+ifneq "$(SUBDIRS)" ""
+
+all docs runtests boot TAGS clean veryclean maintainer-clean install info html ps dvi txt::
+ @echo "------------------------------------------------------------------------"
+ @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+# Don't rely on -e working, instead we check exit return codes from sub-makes.
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done
+ @echo "------------------------------------------------------------------------"
+ @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+
+dist ::
+# Don't rely on -e working, instead we check exit return codes from sub-makes.
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS) ; do \
+ $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
+ $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
+ if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
+ done
+endif
+
+# The default dist rule:
+#
+# copy/link the contents of $(SRC_DIST_FILES) into the
+# shadow distribution tree. SRC_DIST_FILES contain the
+# build-generated files that you want to include in
+# a source distribution.
+#
+#
+ifneq "$(SRC_DIST_FILES)" ""
+dist::
+ @for i in $(SRC_DIST_FILES); do \
+ if ( echo "$$i" | grep "~" >/dev/null 2>&1 ); then \
+ echo $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
+ $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
+ else \
+ if (test -f "$$i"); then \
+ echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
+ $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
+ fi; \
+ fi; \
+ done;
+endif
+
+
+#
+# Selectively building subdirectories.
+#
+#
+ifneq "$(SUBDIRS)" ""
+$(SUBDIRS) ::
+ $(MAKE) -C $@ $(MFLAGS)
+endif
+
+ifneq "$(WAYS)" ""
+ifeq "$(way)" ""
+
+# NB: the targets exclude
+# boot info TAGS runtests
+# since these are way-independent
+all docs TAGS clean veryclean maintainer-clean install ::
+ @echo "------------------------------------------------------------------------"
+ @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+# Don't rely on -e working, instead we check exit return codes from sub-makes.
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(WAYS) ; do \
+ echo "------------------------------------------------------------------------"; \
+ echo "==fptools== $(MAKE) way=$$i $@;"; \
+ echo "PWD = $(shell pwd)"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
+ if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
+ done
+ @echo "------------------------------------------------------------------------"
+ @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
+ @echo "PWD = $(shell pwd)"
+ @echo "------------------------------------------------------------------------"
+
+endif
+endif
+
+##################################################################
# FPtools standard targets
#
# depend:
$(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
endif
ifneq "$(MKDEPENDHS_SRCS)" ""
- $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(patsubst -odir,,$(HC_OPTS)) $(MKDEPENDHS_SRCS)
+ $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(MKDEPENDHS_SRCS)
endif
-# the above patsubst is a hack to remove the '-odir $*' from HC_OPTS
-# which is present when we're splitting objects. The $* maps to
-# nothing, since this isn't a pattern rule, so we have to get rid of
-# the -odir too to avoid problems.
##################################################################
# boot
$(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
endif # if way
-
-
-##################################################################
-#
-# Recursive stuff
-#
-##################################################################
-
-# Here are the diabolically clever rules that
-#
-# (a) for each "recursive target" <t>
-# propagates "make <t>" to directories in SUBDIRS
-#
-# (b) when SUBDIRS is empty,
-# for each "multi-way-target" <t>
-# calls "make -way=w <t>" for each w in $(WAYS)
-#
-# This has the effect of making the standard target
-# in each of the specified ways (as well as in the normal way
-
-# Controlling variables
-# WAYS = extra (beyond the normal way) ways to build things in
-# SUBDIRS = subdirectories to recurse into
-
-# No ways, so iterate over the SUBDIRS
-
-# note about recursively invoking make: we'd like make to drop all the
-# way back to the top level if it fails in any of the
-# sub(sub-...)directories. This is done by setting the -e flag to the
-# shell during the loop, which causes an immediate failure if any of
-# the shell commands fail.
-
-# One exception: if the user gave the -i or -k flag to make in the
-# first place, we'd like to reverse this behaviour. So we check for
-# these flags, and set the -e flag appropriately. NOTE: watch out for
-# the --no-print-directory flag which is passed to recursive
-# invocations of make.
-#
-# NOTE: Truly weird use of exit below to stop the for loop dead in
-# its tracks should any of the sub-makes fail. By my reckoning,
-# "cmd || exit $?" should be equivalent to "cmd"
-
-ifneq "$(SUBDIRS)" ""
-
-all docs runtests boot TAGS clean veryclean maintainer-clean install info html ps dvi txt::
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
-# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(SUBDIRS); do \
- echo "------------------------------------------------------------------------"; \
- echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
- echo " in $(shell pwd)/$$i"; \
- echo "------------------------------------------------------------------------"; \
- $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
- if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
- done
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
-
-dist ::
-# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(SUBDIRS) ; do \
- $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
- $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
- if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
- done
-endif
-
-# The default dist rule:
-#
-# copy/link the contents of $(SRC_DIST_FILES) into the
-# shadow distribution tree. SRC_DIST_FILES contain the
-# build-generated files that you want to include in
-# a source distribution.
-#
-#
-ifneq "$(SRC_DIST_FILES)" ""
-dist::
- @for i in $(SRC_DIST_FILES); do \
- if ( echo "$$i" | grep "~" >/dev/null 2>&1 ); then \
- echo $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
- $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
- else \
- if (test -f "$$i"); then \
- echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
- $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
- fi; \
- fi; \
- done;
-endif
-
-
-#
-# Selectively building subdirectories.
-#
-#
-ifneq "$(SUBDIRS)" ""
-$(SUBDIRS) ::
- $(MAKE) -C $@ $(MFLAGS)
-endif
-
-ifneq "$(WAYS)" ""
-ifeq "$(way)" ""
-
-# NB: the targets exclude
-# boot info TAGS runtests
-# since these are way-independent
-all docs TAGS clean veryclean maintainer-clean install ::
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
-# Don't rely on -e working, instead we check exit return codes from sub-makes.
- @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
- for i in $(WAYS) ; do \
- echo "------------------------------------------------------------------------"; \
- echo "==fptools== $(MAKE) way=$$i $@;"; \
- echo "PWD = $(shell pwd)"; \
- echo "------------------------------------------------------------------------"; \
- $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
- if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
- done
- @echo "------------------------------------------------------------------------"
- @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
- @echo "PWD = $(shell pwd)"
- @echo "------------------------------------------------------------------------"
-
-endif
-endif
-
projects / ghc-hetmet.git / commitdiff